Multitool.org Forum
 
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
+-

Hello Lurker! Remove this ad and much more by logging in.


Needed a extra pocket for my Southord pick set 411

Just Bananas Posts: 75,671
Needed a extra pocket for my Southord pick set
« on: September 21, 2020, 08:49:13 PM »
I have a couple of sets for picking locks but this Southord pick set is in a leather case that has all the picks I use for most locks and another set for locks I only use for locks with narrow keyways and nasty bitting
As I mainly use the Southord pick set I needed a extra pocket in the zip up pouch for three Peterson no1 hooks they are all the same but different thicknesses and these three get used a lot by me so I wanted them in the same pouch
So I used a piece of thin leather and cut it to size and punctured the holes so I could easily sew the leather to the pouch and keep the stitching the same size













fail to prepare prepare to fail
No Life Club Posts: 4,818
Re: Needed a extra pocket for my Southord pick set
« Reply #1 on: September 21, 2020, 09:04:02 PM »
Another well done project :like:

Sent fra min FRD-L09 via Tapatalk

Absolutely No Life Club Posts: 6,262
Re: Needed a extra pocket for my Southord pick set
« Reply #2 on: September 21, 2020, 09:54:46 PM »
Nicely done.  It looks like it belongs.
Just Bananas Posts: 75,671
Re: Needed a extra pocket for my Southord pick set
« Reply #3 on: September 22, 2020, 12:24:25 AM »
Thanks RF52 and Sos  :cheers:
I just wish that the stitching was better

fail to prepare prepare to fail
No Life Club Posts: 1,632
Re: Needed a extra pocket for my Southord pick set
« Reply #4 on: September 22, 2020, 03:50:58 AM »
Excellent work there, W, looks tidy and a lot more practical.  :tu: :cheers:
Global Moderator Absolute Zombie Club Posts: 24,524
Re: Needed a extra pocket for my Southord pick set
« Reply #5 on: September 22, 2020, 06:54:30 AM »
 :iagree:  Good job. 

Esse Quam Videri
Zombie Apprentice Posts: 19,967 Oxygen and magnesium toghether?! OMg!
Re: Needed a extra pocket for my Southord pick set
« Reply #6 on: September 22, 2020, 11:38:53 AM »
Nicely done.  It looks like it belongs.

+1

 :cheers: :tu:

________________________________
It is just a matter of time before they add the word “Syndrome” after my last name.

I don't have OCD, I have OCDEFGHIJKLMNOPQRSTUVWXYZ.

Eff the ineffable, scrut the inscrutable.

IYCRTYSWTMTFOT

Just Bananas Posts: 75,671
Re: Needed a extra pocket for my Southord pick set
« Reply #7 on: September 22, 2020, 02:10:01 PM »
Thanks everyone  :cheers:
That was my first attempt at trying to stitch leather
And it isn’t perfect but it looks good enough
For my first go at leather work  :tu:

fail to prepare prepare to fail
Thread Killer 2019 No Life Club Posts: 4,427
Re: Needed a extra pocket for my Southord pick set
« Reply #8 on: September 22, 2020, 09:19:40 PM »
It looks pretty good to me and it now holds everything like you wanted it to so it's a job well done.
Just Bananas Posts: 75,671
Re: Needed a extra pocket for my Southord pick set
« Reply #9 on: September 23, 2020, 12:02:17 AM »
Thanks Alan  :cheers: :like:

fail to prepare prepare to fail
Zombie Apprentice Posts: 19,667 Armed with camera and not afraid to use it.
Re: Needed a extra pocket for my Southord pick set
« Reply #10 on: September 23, 2020, 12:55:47 AM »
Agreed. That looks good. Great job Wspeed!

A little Leatherman information.

Leatherman series articles
Global Moderator He Who Has The Most Nuts, Wins! Posts: 52,536
Re: Needed a extra pocket for my Southord pick set
« Reply #11 on: September 23, 2020, 03:51:38 AM »
Looks good buddy !  :like:
Just Bananas Posts: 75,671
Re: Needed a extra pocket for my Southord pick set
« Reply #12 on: September 23, 2020, 02:12:56 PM »
Thanks Chako and Steve  :cheers: :tu:

fail to prepare prepare to fail
Full Member Posts: 144
Re: Needed a extra pocket for my Southord pick set
« Reply #13 on: September 27, 2020, 06:09:16 PM »
Seems  to me you also closed -glued?-the central slot so that the tension wrenches wont slide down to the zipper?

Anyway, great work -barely noticeable.
Just Bananas Posts: 75,671
Re: Needed a extra pocket for my Southord pick set
« Reply #14 on: September 27, 2020, 06:44:29 PM »
Thanks Jpac  :cheers:
Yes you are correct I glued the pocket in the centre
I was hoping to stitch it but I couldn’t get a needle to
go through it as it has some card behind it to make it stiffer

fail to prepare prepare to fail

 

Donations

Operational Funds

Help us keep the Unworkable working!
Donate with PayPal!
May Goal: $300.00
Due Date: May 31
Total Receipts: $79.60
PayPal Fees: $5.65
Net Balance: $73.95
Below Goal: $226.05
Site Currency: USD
25% 
May Donations

Community Links


Powered by EzPortal
SMF 2.0.17 | SMF © 2020, Simple Machines
Page created in 0.038 seconds with 32 queries.
© 2018 Defender Web & Tool