Multitool.org Forum
 
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
+-

Hello Lurker! Remove this ad and much more by logging in.


Micarta Monday ! 4141

Global Moderator He Who Has The Most Nuts, Wins! Posts: 57,294
Micarta Monday !
« on: June 28, 2021, 06:26:18 PM »
Let's see them  :tu:


Sr. Member Posts: 491
Re: Micarta Monday !
« Reply #1 on: June 28, 2021, 06:44:12 PM »
Linnemicarta.

Skickat från min SM-G960F via Tapatalk

Sr. Member Posts: 491
Re: Micarta Monday !
« Reply #2 on: June 28, 2021, 06:45:10 PM »
Linnemicarta and G10.

Skickat från min SM-G960F via Tapatalk

Global Moderator He Who Has The Most Nuts, Wins! Posts: 57,294
Re: Micarta Monday !
« Reply #3 on: June 28, 2021, 08:53:44 PM »
Very nice seved !    :like:
Sr. Member Posts: 491
Re: Micarta Monday !
« Reply #4 on: June 28, 2021, 10:18:38 PM »
Thank you  :D

Seved
No Life Club Posts: 1,504
Re: Micarta Monday !
« Reply #5 on: June 29, 2021, 01:37:15 AM »
Here are a bunch of Micarta handled knives;both linen and paper.
#1 & #2 A WWII era theatre knife.
#3 Marked only 61707;a very nice drop point hunter.
#4 An Al Mar S.E.R.E. folder.
2016FixedBlades 065.jpg
* 2016FixedBlades 065.jpg (Filesize: 49.84 KB)
2016FixedBlades 066.jpg
* 2016FixedBlades 066.jpg (Filesize: 45.86 KB)
61707FixedBlade$22.50.JPG
* 61707FixedBlade$22.50.JPG (Filesize: 53.28 KB)
AlMarS.E.R.E.MarkSide.JPG
* AlMarS.E.R.E.MarkSide.JPG (Filesize: 44.24 KB)
No Life Club Posts: 1,504
Re: Micarta Monday !
« Reply #6 on: June 29, 2021, 01:41:12 AM »
#1 & #2 An unmarked tri-corner dagger.
#3 & #4 a custom slide blade dagger marked,"EL" inside a circle and,"Z3" in smaller letters with ivory paper Micarta handles.
CustomKnives2018 053.jpg
* CustomKnives2018 053.jpg (Filesize: 51.05 KB)
UnmarkedTheatreKnife#4.JPG
* UnmarkedTheatreKnife#4.JPG (Filesize: 48.58 KB)
ELinACircleZ3Closed.JPG
* ELinACircleZ3Closed.JPG (Filesize: 46.03 KB)
ELinACircleZ3Open.JPG
* ELinACircleZ3Open.JPG (Filesize: 50.79 KB)
No Life Club Posts: 1,504
Re: Micarta Monday !
« Reply #7 on: June 29, 2021, 01:43:34 AM »
#1Frederick Remington United States Cutlery with etched blade.
#2,#3,&#4 Khyber folders in three different sizes.
FrederickRemingtonUnitedStatesCutlery2017 001.jpg
* FrederickRemingtonUnitedStatesCutlery2017 001.jpg (Filesize: 58.39 KB)
Khyber2601-1.JPG
* Khyber2601-1.JPG (Filesize: 51.91 KB)
Khyber2602-1.JPG
* Khyber2602-1.JPG (Filesize: 51.11 KB)
Khyber2603-1.JPG
* Khyber2603-1.JPG (Filesize: 49.82 KB)
No Life Club Posts: 1,504
Re: Micarta Monday !
« Reply #8 on: June 29, 2021, 01:46:51 AM »
#1 Gerber Paul 2PM with ivory paper Micarta handles.
#2 United States Cutlery Mountain Shadow. lockback.
#3 Walsh custom dagger with ivory Micarta handle.
#4 Zalesky drop point hunter;my first custom knife.
GerberPaul2PMMarkSide.JPG
* GerberPaul2PMMarkSide.JPG (Filesize: 72.22 KB)
UnitedStatesCutleryJapanMountainShadowLockback1.JPG
* UnitedStatesCutleryJapanMountainShadowLockback1.JPG (Filesize: 49.84 KB)
WalshCustomIvoryMicartaHandledDagger1.JPG
* WalshCustomIvoryMicartaHandledDagger1.JPG (Filesize: 50.69 KB)
ZaleskyHunter1.JPG
* ZaleskyHunter1.JPG (Filesize: 56.12 KB)
No Life Club Posts: 1,504
Re: Micarta Monday !
« Reply #9 on: June 29, 2021, 01:47:56 AM »
#1 & #2 A Kershaw Golden Eagle limited edition knife.
KershawGoldenEagle1.jpg
* KershawGoldenEagle1.jpg (Filesize: 68.97 KB)
KershawGoldenEagle2.jpg
* KershawGoldenEagle2.jpg (Filesize: 78.8 KB)
Absolutely No Life Club Posts: 9,671
Re: Micarta Monday !
« Reply #10 on: June 29, 2021, 02:45:07 AM »
Good knives and pics everyone! Didnt catch this in time for this week. Sooooooooooo there's always next week.     :D

What? Enablers! Are you serrrrious? Where? I dont see any.
Hold Fast
Zombie Apprentice Posts: 15,845
Re: Micarta Monday !
« Reply #11 on: July 05, 2021, 07:49:01 PM »
Good knives and pics everyone! Didnt catch this in time for this week. Sooooooooooo there's always next week.     :D

 :iagree: :like:

Formerly known as MTMatt
Zombie Apprentice Posts: 15,845
Re: Micarta Monday !
« Reply #12 on: July 05, 2021, 07:49:18 PM »
 :hatsoff:


Formerly known as MTMatt
Global Moderator He Who Has The Most Nuts, Wins! Posts: 57,294
Re: Micarta Monday !
« Reply #13 on: July 05, 2021, 10:15:13 PM »
 :like: :tu:
Global Moderator He Who Has The Most Nuts, Wins! Posts: 57,294
Re: Micarta Monday !
« Reply #14 on: July 05, 2021, 10:15:22 PM »
Zombie Apprentice Posts: 15,845
Re: Micarta Monday !
« Reply #15 on: July 05, 2021, 10:34:59 PM »
Oh, does the Farm & Field Bullnose have micarta handles?  :like:
« Last Edit: July 05, 2021, 10:50:22 PM by McStitchy »

Formerly known as MTMatt
Absolutely No Life Club Posts: 9,671
Re: Micarta Monday !
« Reply #16 on: July 05, 2021, 10:47:47 PM »
GEC Bull Nose with Red Micarta
IMG_8015.JPG
* IMG_8015.JPG (Filesize: 53.94 KB)

What? Enablers! Are you serrrrious? Where? I dont see any.
Hold Fast
Zombie Apprentice Posts: 15,845
Re: Micarta Monday !
« Reply #17 on: July 05, 2021, 10:50:58 PM »
GEC Bull Nose with Red Micarta

I'll take that as a yes  :like:

Formerly known as MTMatt
Global Moderator He Who Has The Most Nuts, Wins! Posts: 57,294
Re: Micarta Monday !
« Reply #18 on: July 05, 2021, 11:00:23 PM »
Oh, does the Farm & Field Bullnose have micarta handles?  :like:


OD linen Micarta
Absolutely No Life Club Posts: 9,671
Re: Micarta Monday !
« Reply #19 on: July 05, 2021, 11:03:07 PM »
I'll take that as a yes  :like:

Yes! Most have been made with Micarta. There were orange and black Delrin, Nifebrite and Tortoise Acrylic and a Osage Orange that I know of.

What? Enablers! Are you serrrrious? Where? I dont see any.
Hold Fast
No Life Club Posts: 1,504
Re: Micarta Monday !
« Reply #20 on: July 06, 2021, 01:02:50 AM »
A few more from the accumulation:
#1 Benchmark Argonaut designed by Blackie Collins.
#2 Benchmark Rolox;another Blackie Collins design.
#3 Al Mar folder with ivory paper Micarta handles.
#4 Frank Centofante tribute knife by CRKT.
BenchmarkArgonaut2.jpg
* BenchmarkArgonaut2.jpg (Filesize: 48.68 KB)
BenchmarkRoloxBlack1.JPG
* BenchmarkRoloxBlack1.JPG (Filesize: 49.63 KB)
AlMarMarkSide.JPG
* AlMarMarkSide.JPG (Filesize: 43.92 KB)
CRKTCentofanteTribute 001.jpg
* CRKTCentofanteTribute 001.jpg (Filesize: 173.04 KB)
No Life Club Posts: 1,504
Re: Micarta Monday !
« Reply #21 on: July 06, 2021, 01:08:06 AM »
Another four and there ain't no more.
#1 A double bladed fish knife that can be disassembled for cleaning.The scaler teeth face in opposite directions and the curved area is extremely sharp.
#2 Stamped,"L.J.M." the large fullered double edge blade has rings of Micarta interspersed with aluminum.Came out of a huge collection of militaria and I believe it was a WWII theatre knife.
#3 An unmarked dagger with unusually colored Micarta rings for the handle.
#4 A Kinfolks throwing knife
DoubleBladeFishKnife1.JPG
* DoubleBladeFishKnife1.JPG (Filesize: 45.48 KB)
MysteryDagger1.jpg
* MysteryDagger1.jpg (Filesize: 60.24 KB)
UnmarkedDagger1 2019.JPG
* UnmarkedDagger1 2019.JPG (Filesize: 46.29 KB)
KinfolksThrowingKnife2019 001.jpg
* KinfolksThrowingKnife2019 001.jpg (Filesize: 99.51 KB)
Zombie Apprentice Posts: 15,845
Re: Micarta Monday !
« Reply #22 on: July 06, 2021, 09:57:55 AM »

OD linen Micarta

Yes! Most have been made with Micarta. There were orange and black Delrin, Nifebrite and Tortoise Acrylic and a Osage Orange that I know of.

Thanks guys. Oh, and I didn't know Nifebrite yet  :ahhh

Formerly known as MTMatt
Zombie Apprentice Posts: 15,845
Re: Micarta Monday !
« Reply #23 on: July 06, 2021, 10:08:14 AM »
What a collection Ray  :2tu:

The Benchmark Rolox is a curious design.
I think I wouldn't want to have it accidently opening in my pockets  :ahhh

Formerly known as MTMatt
No Life Club Posts: 1,504
Re: Micarta Monday !
« Reply #24 on: July 06, 2021, 08:25:34 PM »
What a collection Ray  :2tu:

The Benchmark Rolox is a curious design.
I think I wouldn't want to have it accidently opening in my pockets  :ahhh

I don't think that is as big an issue as having it close while you are working with it. Some time ago I did a post on this knife showing it's deficiencies. The concept was by one of the great knife designers of our time;the late Walter,"Blackie" Collins.
Blackie;along with his brother Michael who was a fantastic scrimshaw artist as well as a custom knifemaker were responsible for many of the innovations on modern production knives. This one;in my opinion was probably the worst design he ever did.
Essentially the way it works is you press down on the serrated button on the top of the knife and that elevates the point.Pushing forward on the button moves the blade to the open position and the point drops locking the blade open.
To close,you depress the lock bar(on the bottom of the handle) and pull up on the blade allowing it to slide to the rear and into the locked close position. It can be a bit awkward to operate until you get the hang of it. It is NOT a one hand opener by any means.
The problem lies in the fact that if you are attempting to do any heavy cutting(such as dismembering heavy cardboard)and putting heavy downward pressure on the handle your small finger rests right on the lock bar and can easily trigger the lock. This results in the blade sliding backward rather handily and trapping the flesh between you thumb and forefinger between the sharp back edge of the blade and the frame.(DO NOT ask how I know this!)
Here are the pictures showing the operating sequence.
The pictures shown are of a wood handled Rolox that I bought new.The Micarta handled version I got in a trade.They were not cheap knives when new;in the 1980's they were about $65 US for this model. They also had a slightly smaller version and ones with stag handles.
BenchmarkRolox3.JPG
* BenchmarkRolox3.JPG (Filesize: 29.32 KB)
BenchmarkRolox4.JPG
* BenchmarkRolox4.JPG (Filesize: 24.68 KB)
BenchmarkRolox5.JPG
* BenchmarkRolox5.JPG (Filesize: 24.81 KB)
BenchmarkRolox6.JPG
* BenchmarkRolox6.JPG (Filesize: 39.42 KB)
Zombie Apprentice Posts: 15,845
Re: Micarta Monday !
« Reply #25 on: July 06, 2021, 09:10:50 PM »
Aha, so a simple push onto it is not enough to deploy it. It needs a push forward as well  :tu:
The un-lock button position is unfortunate though  :facepalm:

 :cheers:

Formerly known as MTMatt
Global Moderator He Who Has The Most Nuts, Wins! Posts: 57,294
Re: Micarta Monday !
« Reply #26 on: July 12, 2021, 08:13:12 PM »
Absolutely No Life Club Posts: 9,671
Re: Micarta Monday !
« Reply #27 on: July 13, 2021, 04:21:06 AM »
Happy WHW!
KIMG0705~2.JPG
* KIMG0705~2.JPG (Filesize: 319.46 KB)

What? Enablers! Are you serrrrious? Where? I dont see any.
Hold Fast
Global Moderator He Who Has The Most Nuts, Wins! Posts: 57,294
Re: Micarta Monday !
« Reply #28 on: July 13, 2021, 05:40:49 AM »
Happy WHW!


 :rofl:   you must be having a good time on vacation   ;)

It's MM  :D
Global Moderator He Who Has The Most Nuts, Wins! Posts: 57,294
Re: Micarta Monday !
« Reply #29 on: July 20, 2021, 12:02:41 AM »
Happy MM !    :cheers:



 

Donations

Operational Funds

Help us keep the Unworkable working!
Donate with PayPal!
January Goal: $300.00
Due Date: Jan 31
Total Receipts: $62.47
PayPal Fees: $4.40
Net Balance: $58.07
Below Goal: $241.93
Site Currency: USD
19% 
January Donations

Community Links


Powered by EzPortal
SMF 2.0.18 | SMF © 2020, Simple Machines
Page created in 0.091 seconds with 123 queries.
© 2018 Defender Web & Tool