Multitool.org Forum
+-

Hello Lurker! Remove this ad and much more by logging in.


Vintage SAK 30 day challenge May 2023 (SAK’s from 1986 and earlier)

Echotech · 961 · 32651

gb Offline Rizio Il Ghiro

  • *
  • No Life Club
  • ******
    • Posts: 4,263
I have to agree Sos24, Elsinox certainly has some fascinating knives to show!  :like: :like:

Day 22

Back to the 234k from the early to mid 60s - used the small blade to cut out the tongue on this box of compost accelerator. Whenever I “push to open” it usually goes horrendously wrong with the cardboard giving way suddenly and me spraying accelerator dust everywhere but in the compost bin!  :facepalm:


us Offline Adam5

  • Absolutely No Life Club
  • *******
    • Posts: 8,389

us Offline BPRoberts

  • *
  • No Life Club
  • ******
    • Posts: 3,031
I have to agree Sos24, Elsinox certainly has some fascinating knives to show!  :like: :like:

Day 22

Back to the 234k from the early to mid 60s - used the small blade to cut out the tongue on this box of compost accelerator. Whenever I “push to open” it usually goes horrendously wrong with the cardboard giving way suddenly and me spraying accelerator dust everywhere but in the compost bin!  :facepalm:

I never have any luck with those tabs either. I usually use my Shard on them.


gb Offline Rizio Il Ghiro

  • *
  • No Life Club
  • ******
    • Posts: 4,263
Good to see I’m not alone, BPRoberts!  :cheers:


us Offline pa_strunk

  • *
  • No Life Club
  • ******
    • Posts: 1,809
  • MAJ/APA
Day 22 - Trimming a little plastic
"Every generation has the obligation to free men's minds for a look at new worlds, to look out from a higher plateau than the last generation." Ellison Onizuka


us Offline Fireman

  • *
  • No Life Club
  • ******
    • Posts: 2,346
  • Truck Monkey
DAY 22  Tank inspecting today's carry SAK.




cz Offline z1913

  • *
  • Hero Member
  • *****
    • Posts: 759
Day 22

Bike ride to the office today with the Solo.


fr Offline m47mu74nt

  • *
  • No Life Club
  • ******
    • Posts: 2,431
DAY22
Today I used my Elinox stamped BAKER'S knife to cut... Bread. (even if it's intended to cut dough and not baked bread, it works pretty well!)
Wasn't pleasant to use it to cut open packages though, but it finally did it.
Meet me also on youtube & instagram for mostly knives (and multitools) content


gb Offline MichaelGT83

  • *
  • No Life Club
  • ******
    • Posts: 1,332
Day 22

We have the tools, we have the talent!


us Offline psyjohn

  • Sr. Member
  • ****
    • Posts: 496
Day 22
One of the true gems in my collection, my 1965 Alox Woodsman. This one has a bit of a story behind it. When I first got into collecting Swiss Army Knives, and before I knew much about different models, I decided I really wanted a red, old cross Alox. Not long after that I found a beautiful Farmer at a reasonable price and I bought it.

When it arrived I was confused; there was no opening layer. I started researching online to figure out what the model was, which led me to visit Sakwiki and the Swiss Army Knights forum. Eventually, I found the Sakwiki page for the 93mm Woodsman, and was thrilled to find I had a fantastic example of a pretty rare knife.

The best part is discovering this forum and Sakwiki. I can't tell you how much I've learned from those two sources. I'm also glad I finally joined after being a lurker for so long. LOL

I haven't used it for anything today, but I have enjoyed talking it out of my pocket and admiring it. The snap on the tools is ridiculous; it's hard to believe it's almost 60 years old. Victorinox quality!

Also, I can't seem to capture the true color in a picture. It has a very slight orange-ish hue that is really very beautiful.


de Offline peddy v

  • *
  • Jr. Member
  • **
    • Posts: 93
  • ...more like a wizard than a knight
Day 22:

Cut some tape and cleaned my fingernails.


us Offline tjfarrington2000

  • *
  • Hero Member
  • *****
    • Posts: 770
Day 22:
60’s executive for today. No pics as I’m swamped at the moment


Sent from my iPhone using Tapatalk


us Offline BPRoberts

  • *
  • No Life Club
  • ******
    • Posts: 3,031
Day 22

DEATHCLAW test number 1. First day for the '43. I bought several cans of fruit at the store for science dessert.

The can opener is definitely the worst nail breaker on a tool full of them. Not only is it hard to get the leverage to open the tool, but that little nub is great at slipping under/wedging in a nail.

  [ You are not allowed to view this attachment ]  

Today, I tried using the can opener as close to the modern method as possible. If you put the pointy side on the top and the other side down/outside there's no good way to hook it on the rim of the can, and you're actually working "upside down" relative the the mechanism, so it tends to close up. Flip it over, and it is possible to start the cut with the tip, but the awl works better.

  [ You are not allowed to view this attachment ]  

  [ You are not allowed to view this attachment ]  

Once started, the opener itself is very easy to use. It's a very generous sharp edge compared to most modern designs.  You use the "bottom" half (with the thumb tab) as a lever and slice on through. As you can see, it's a great way to make a knife using your Swiss Army Knife.

  [ You are not allowed to view this attachment ]  

I'll try the other cans with some different techniques later this week and report back.
« Last Edit: May 23, 2023, 02:03:36 AM by BPRoberts »


us Offline GA1dad

  • No Life Club
  • ******
    • Posts: 2,125
Vintage SAK 30 Day Challenge
Day 22 of 30
1970-ish Pioneer

I found this $2.99 antenna at a thrift store this afternoon,,,, and it works!!  The significance is that I needed something to troubleshoot my current setup that has not been working properly. I was not sure if it was my tv connection, the antenna or the coax cable in between. Since I plugged it into the tv and my reception was  instantly clear, I've now ruled out the tv,,, for only $2.99,,,,, and I have a backup antenna to get me by for a bit,,, and to use in our camper possibly.

Jason - N4RBZ- A Harley can get you through times of no money better than money can get you through times of no Harley____O~`o__


us Offline marlowe221

  • *
  • No Life Club
  • ******
    • Posts: 1,080
Day 22

No uses today but I thought I would post a picture of my early 80s Standard with this neat book I got recently.

  [ You are not allowed to view this attachment ]  

I, uh, haven’t read it yet…  :D


au Offline Echotech

  • *
  • Zombie Apprentice
  • ********
    • Posts: 11,361

au Offline Echotech

  • *
  • Zombie Apprentice
  • ********
    • Posts: 11,361
Day 22
One of the true gems in my collection, my 1965 Alox Woodsman. This one has a bit of a story behind it. When I first got into collecting Swiss Army Knives, and before I knew much about different models, I decided I really wanted a red, old cross Alox. Not long after that I found a beautiful Farmer at a reasonable price and I bought it.

When it arrived I was confused; there was no opening layer. I started researching online to figure out what the model was, which led me to visit Sakwiki and the Swiss Army Knights forum. Eventually, I found the Sakwiki page for the 93mm Woodsman, and was thrilled to find I had a fantastic example of a pretty rare knife.

The best part is discovering this forum and Sakwiki. I can't tell you how much I've learned from those two sources. I'm also glad I finally joined after being a lurker for so long. LOL

I haven't used it for anything today, but I have enjoyed talking it out of my pocket and admiring it. The snap on the tools is ridiculous; it's hard to believe it's almost 60 years old. Victorinox quality!

Also, I can't seem to capture the true color in a picture. It has a very slight orange-ish hue that is really very beautiful.
:drool: an absolute beauty psyjohn :like:



au Offline Echotech

  • *
  • Zombie Apprentice
  • ********
    • Posts: 11,361
Day 22

DEATHCLAW test number 1. First day for the '43. I bought several cans of fruit at the store for science dessert.

The can opener is definitely the worst nail breaker on a tool full of them. Not only is it hard to get the leverage to open the tool, but that little nub is great at slipping under/wedging in a nail.

  [ Quoting of attachment images from other messages is not allowed ]  

Today, I tried using the can opener as close to the modern method as possible. If you put the pointy side on the top and the other side down/outside there's no good way to hook it on the rim of the can, and you're actually working "upside down" relative the the mechanism, so it tends to close up. Flip it over, and it is possible to start the cut with the tip, but the awl works better.

  [ Quoting of attachment images from other messages is not allowed ]  

  [ Quoting of attachment images from other messages is not allowed ]  

Once started, the opener itself is very easy to use. It's a very generous sharp edge compared to most modern designs.  You use the "bottom" half (with the thumb tab) as a lever and slice on through. As you can see, it's a great way to make a knife using your Swiss Army Knife.

  [ Quoting of attachment images from other messages is not allowed ]  

I'll try the other cans with some different techniques later this week and report back.
:ahhh :ahhh

Great test but crikey :tu:


au Offline Echotech

  • *
  • Zombie Apprentice
  • ********
    • Posts: 11,361
Day 22

No uses today but I thought I would post a picture of my early 80s Standard with this neat book I got recently.

  [ Quoting of attachment images from other messages is not allowed ]  

I, uh, haven’t read it yet…  :D
:like: :tu:

I love SAK books, that ones pretty good, some interesting tips

:cheers:


au Offline Echotech

  • *
  • Zombie Apprentice
  • ********
    • Posts: 11,361
Day 23

As I’m still recovering from surgery I’m not really supposed to do anything, had to sneak this little job in when Janet went out :rofl:

Wenger Tahara mod08 “P” (private) with WK stamp

The awl is lovely and pointy on these old soldiers and the driver good and solid, probably shouldn’t have cut my finger nails this morning though :think:






us Offline marlowe221

  • *
  • No Life Club
  • ******
    • Posts: 1,080
:like: :tu:

I love SAK books, that ones pretty good, some interesting tips

:cheers:

Good to know! Any other books you would recommend?


au Offline Echotech

  • *
  • Zombie Apprentice
  • ********
    • Posts: 11,361
Good to know! Any other books you would recommend?
The other three I have are these

Dave Arnold’s Wenger book is a work of art full of beautiful pictures and a real slice of history

The survival book has plenty of projects and tips and gets you thinking of the possibilities a SAK can be used for. It’s not that long but quite enjoyable

The Vic book examines some history and takes a close up look at some models as well as having some nice pics of old ads which are cool but it could be more comprehensive

:cheers:




us Offline Farmer X

  • *
  • Zombie Apprentice
  • ********
    • Posts: 13,744
  • Master of the unexciting
It's been an...interesting past 36 hours. I'm a little late with some posts, so let's get on it.

Day 21

A no-use day...

  [ You are not allowed to view this attachment ]  

Day 22

A new outlet was wired up. I used the Tinker Small's Phillips to screw the outlet to the junction box, but quickly gave up and grabbed a dedicated tool. The Camillus 27 was used to cut the insulation from the Romex.

  [ You are not allowed to view this attachment ]  

I awlso tried out the wire stripper notch. In my opinion, it's the most pointless feature on an SAK. A dedicated tool does the job much faster and easier. The notch doesn't hold 12 AWG very well. This one was even worse; without a half-stop, the cap lifter fully opened during the process...more than once. Though it got the job done, it's the first and last time I'll try stripping wire with an older SAK.

  [ You are not allowed to view this attachment ]  
USN 2000-2006

Culling of the knife and multi herds in progress...

If I pay five figures for something, it better have wings or a foundation!


au Offline Echotech

  • *
  • Zombie Apprentice
  • ********
    • Posts: 11,361

00 Offline elsinox

  • Full Member
  • ***
    • Posts: 146
day 23

Model Elsener No. 240

Used the Hoof Cleaner to move a sack of dog poo.

This hoof cleaner is a super tool and versatile. Modern SAK do not have such a tool, and the Multipurpose Hook is too small for it. point for vintage.

Intermediate score: 15:9


us Offline marlowe221

  • *
  • No Life Club
  • ******
    • Posts: 1,080
The other three I have are these

Dave Arnold’s Wenger book is a work of art full of beautiful pictures and a real slice of history

The survival book has plenty of projects and tips and gets you thinking of the possibilities a SAK can be used for. It’s not that long but quite enjoyable

The Vic book examines some history and takes a close up look at some models as well as having some nice pics of old ads which are cool but it could be more comprehensive

:cheers:

(Image removed from quote.)
(Image removed from quote.)

Thanks! I'll keep an eye out for these.


us Offline Fireman

  • *
  • No Life Club
  • ******
    • Posts: 2,346
  • Truck Monkey
DAY 23   The Climber is with me today, but Pete is unimpressed with my choice.



cz Offline z1913

  • *
  • Hero Member
  • *****
    • Posts: 759
Day 23

First watermelon of the year for me. The blade size was just enough long to cut it comfortably.


us Offline Explorer

  • *
  • No Life Club
  • ******
    • Posts: 1,794
DAY 22

Yep I totally passed out last night before posting. Yesterday was a long day. Used the scissors on the 70s Explorer to open a bag of potato chips. Used the small blade to cut up some cardboard for recycling. Then used the backside awl to poke a hole in the sealing disc of some dishwasher detergent.

No action shots but here’s a glam shot with an old book.




 

Donations

Operational Funds

Help us keep the Unworkable working!
Donate with PayPal!
April Goal: $300.00
Due Date: Apr 30
Total Receipts: $155.65
PayPal Fees: $9.15
Net Balance: $146.50
Below Goal: $153.50
Site Currency: USD
49% 
April Donations

Community Links


Powered by EzPortal