Need tips for modding a knifeless rebar?

Skin..Pride · **on:** September 21, 2024, 10:57:21 AM

Hello
I would like to replace the awl in my knifeless rebar with a small flat screwdriver like in the original pst or the smallest one from
st300 eod...
Need a small flat screwdriver but no awl..

So what do I need to get it working and what parts/tools do I need?

Juan el Boricua · **Reply #1 on:** September 21, 2024, 02:48:37 PM

If I'm not mistaken, you can get one from a junked/for-parts Fuse or Kick model and it will drop in without mods (or maybe minimal, like widening the lock stop), as they share the same pivot hole and are classed as 4" tools like the modern Rebar. I also think you'll have to run it where the thick spacer is, as to not hinder the pliers from fully closing. Lets wait for someone more knowledgeable chime in.

John Worledge · **Reply #2 on:** September 21, 2024, 07:16:19 PM

Do you mean like this one? It's not quite finished but it is very nearly the Super Knifeless Rebar I intended.

John Worledge · **Reply #3 on:** September 21, 2024, 07:29:51 PM

The awl is a reprofiled Surge item, T-shank adapter is from a an ST300EOD and is heavily modified, I had to modify the lock to accept it, there is also a small flat screwdriver from a Fuse and a medium flat is a modded large flat from any older 4" tool cut down to fit UK electrical sockets and switches. All other parts are standard Rebar.
Next is to replace the fixed cross head with a bit adapter and reorganise the tools to add a Rebar saw.
A word to the wise, modding multitools is like smoking, once you start you will never get that monkey off your back.

genevabuck · **Reply #4 on:** September 21, 2024, 08:25:23 PM

Getting one off the Kick/Fuse/Blast is probably your best option. This site probably has them.

https://usedmultitool.com/

SteveC · **Reply #5 on:** September 21, 2024, 09:20:26 PM

Skin..Pride · **Reply #6 on:** September 22, 2024, 05:16:06 PM

Hello
thanks everyone!

As I said, I just want to replace the awl with a small flat screwdriver..
Like the little one on pst..

The kick screwdriver looks great! Have to look for one like that..
Also have to buy the tools to unscrew it and get the tools there..
Which side should the screw be loosened on?

Skin..Pride · **Reply #7 on:** September 22, 2024, 05:21:12 PM

Is the small screwdriver the same size on both Kick and Blast?

Skin..Pride · **Reply #8 on:** September 22, 2024, 05:24:06 PM

Do you think the small screwdriver from Pst would fit?

Screenshot_2024-09-20-05-56-50-59_40deb401b9ffe8e1df2f1cc5ba480b12.jpg (Filesize: 187.75 KB)

Juan el Boricua · **Reply #9 on:** September 22, 2024, 05:30:39 PM

The pivots should be the same, even as the Rebar's. Go to Ebay or Etsy and look for Leatherman parsing wrenches, and go for the cross/X shape or dog-bone shape ones as they come with all four sizes available from Leatherman. You'll need both, as not to damage the stationary/receiving/female end of the pivot screw. Do heat the pivot to break loose the thread locking compound if either tool has not been worked/modified on before. Remember "righty tighty, lefty loosey". If you do not want to wait, you may do with a pair of locking needlenose pliers, but this can mar the knurling and/or surfaces. Do show pictures of the finished product!

Juan el Boricua · **Reply #10 on:** September 22, 2024, 05:32:07 PM

It might fit, but will require work on the tang's end and notch for it to work properly.

Skin..Pride · **Reply #11 on:** September 22, 2024, 06:47:35 PM

Do these tools work?

Screenshot_2024-09-22-18-45-59-78_40deb401b9ffe8e1df2f1cc5ba480b12.jpg (Filesize: 92.72 KB)

Juan el Boricua · **Reply #12 on:** September 22, 2024, 07:32:35 PM

I have no experience with those; haven't seen them before. See under the description it they mention any or all of these: Rebar, Charge Al, kick, Blast, Fuse, PST, etc

Skin..Pride · **Reply #13 on:** September 22, 2024, 07:37:22 PM

Fitment

For LEATHERMAN SuperTool (ST)

For LEATHERMAN ST200

For LEATHERMAN ST200LEATHERMAN Crunch

For LEATHERMAN Pulse

For LEATHERMAN Core

For LEATHERMAN Kick

For LEATHERMAN Fuse

For LEATHERMAN Blast

For LEATHERMAN ST300

For LEATHERMAN Charge AL / Charge ALX

For LEATHERMAN Charge + / Charge Plus / Heritage Charge+

For LEATHERMAN Bond

For LEATHERMAN PST / PST II

For LEATHERMAN Rebar

Package Included
1 Pair of Wrench Spanner

Juan el Boricua · **Reply #14 on:** September 22, 2024, 08:14:52 PM

Should be ok.

mvp · **Reply #15 on:** September 22, 2024, 08:25:43 PM

Sorry if it's a little bit off topic but I just saw a post on a facebook group with a modified Kick with some Rebar/Wave+ tools and those photos makes me want one!

This is from the original post: "The plier head, knife, file, can opener, large flat, and awl are all from the Rebar. The scissors, and bit driver are from a Wave+. And I Rit Dyed the liners black…"
And these are the pictures...

madfishcat · **Reply #16 on:** September 22, 2024, 08:55:43 PM

nu-i rău. rama veche si umplutura moderna. o șurubelniță mare ridică îndoieli cu privire la necesitatea ei
not bad. old frame and modern filling. big screwdriver makes me doubt its necessity

SteveC · **Reply #17 on:** September 22, 2024, 09:13:47 PM

Quote from: Skin..Pride on September 22, 2024, 05:24:06 PM

Do you think the small screwdriver from Pst would fit? [ Quoting of attachment images from other messages is not allowed ] [ Quoting of attachment images from other messages is not allowed ]

It will but you'll have to mod it slightly to fit the lock bar.

Here is a PST file mod to a Rebar

https://forum.multitool.org/index.php?topic=67481.msg1319852#msg1319852

Farmer X · **Reply #18 on:** September 23, 2024, 02:34:16 AM

I'll chime in here as well. I can't say if the small screwdrivers in the Kick and Blast are the same (though I'd say it's very likely). However, I'd be happy to compare mine. There is a member here who made wrenches for the knurled Leatherman fasteners, but he's been forced to suspend sales due to sanctions. And shop around! €39.90 could probably get you two parts PSTs in the States if you have patience and a little luck.