Multitool.org Forum
+-

Hello Lurker! Remove this ad and much more by logging in.


Modding CenterDrive - PartsDonors for MP600 Toolsets

Offline Trilby

  • Newbie
  • *
    • Posts: 32
Modding CenterDrive - PartsDonors for MP600 Toolsets
on: November 26, 2024, 01:26:15 PM
Looking for interchangeable Parts for the CenterDrive, there is the DualForce for File/Chisel and Saw.
 And for the other Handle of the CD which is completely based on the MP600, there is a surprisingly large Selection of Donor Models

 Many earlier Gerber Models of the last 2 Decades have Tools that are compatible with the MP600 and thus with the CenterDrive

 Most Interestingly due to its affordability might be the Suspension Series including BearGrylls. And even more affordable the Suspension KnockOff Daicamping DL3

(Note that if have not yet tried the Suspension/DL3 Parts in a MP600/CD, but am just assuming based on comparing Pictures of Parts)

 Pictures are borrowed from eBay Stores and Youtube ..
https://www.youtube.com/watch?v=wwS4j5EHgVM
(Video of assembling the DL3)

* Gerber CenterDrive Parts.jpg (Filesize: 208.1 KB)
« Last Edit: November 26, 2024, 01:39:07 PM by Trilby »


Offline Trilby

  • Newbie
  • *
    • Posts: 32
Re: Modding CenterDrive - PartsDonors for MP600 Toolsets
Reply #1 on: November 26, 2024, 01:28:35 PM
MP600 Parts

* Gerber MP600 Parts.jpg (Filesize: 399.38 KB)


Offline Trilby

  • Newbie
  • *
    • Posts: 32
Re: Modding CenterDrive - PartsDonors for MP600 Toolsets
Reply #2 on: November 26, 2024, 01:30:56 PM
SuspensionNXT Parts.
Many other Gerbers use a similar Design with compatible Tools. E.g. BearGrylls etc

* Gerber SuspensionNXT Parts.jpg (Filesize: 290.64 KB)


Offline Trilby

  • Newbie
  • *
    • Posts: 32
Re: Modding CenterDrive - PartsDonors for MP600 Toolsets
Reply #3 on: November 26, 2024, 01:33:14 PM
15$ KnockOff Daicamping DL3 which seems to be a Suspension Clone. Ergo the Toolset should be compatible with the CenterDrives MP600 Parts

* Daicamping DL3.jpg (Filesize: 193.39 KB)


Offline Trilby

  • Newbie
  • *
    • Posts: 32
Re: Modding CenterDrive - PartsDonors for MP600 Toolsets
Reply #4 on: November 26, 2024, 01:34:29 PM
Screenshot from a official Daicamping Assembly Vid of the DL3 from https://www.youtube.com/watch?v=wwS4j5EHgVM

* Daicamping DL3 Parts.jpg (Filesize: 219.41 KB)


pr Offline Juan el Boricua

  • No Life Club
  • ******
    • Posts: 3,413
Re: Modding CenterDrive - PartsDonors for MP600 Toolsets
Reply #5 on: November 26, 2024, 08:02:16 PM
Trilby, thank you for the cross  referencing of impleemntz. You may also include the implements of the discontinued MP400 and 700 series; the 400 used the same ones as the 600 series, and the 700 share the same pivot size and locking tab.


fi Offline Antti Lammi

  • Global Moderator
  • *
  • Absolutely No Life Club
  • *
    • Posts: 5,547
  • Only Tools Matters
Re: Modding CenterDrive - PartsDonors for MP600 Toolsets
Reply #6 on: November 27, 2024, 05:16:55 PM
Trilby, thank you for the cross  referencing of impleemntz. You may also include the implements of the discontinued MP400 and 700 series; the 400 used the same ones as the 600 series, and the 700 share the same pivot size and locking tab.
also MP800 pivot size is same as MP600 and if im not mistaken Gerber Armabar has also same pivot size


 

Donations

Operational Funds

Help us keep the Unworkable working!
Donate with PayPal!
February Goal: $300.00
Due Date: Feb 28
Total Receipts: $86.10
PayPal Fees: $4.87
Net Balance: $81.23
Below Goal: $218.77
Site Currency: USD
27% 
February Donations

Community Links


Powered by EzPortal