<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[Charge ALX vs Wave (post2004)]]></title><description><![CDATA[<p dir="auto">For those of you torn between the Wave or a Charge (ALX) this is for you.</p>
<p dir="auto"><img src="http://i277.photobucket.com/albums/kk74/leatherxman/IMG_20110708_122705.jpg" alt="" class="img-markdown  img-fluid" /><br />
both come with fairly nice sheaths. That's about 5 years of near daily wear for my Wave sheath. I expect the Charge sheath to last me at least that long too.</p>
<p dir="auto"><img src="http://i277.photobucket.com/albums/kk74/leatherxman/IMG_20110708_122732.jpg" alt="" class="img-markdown  img-fluid" /><br />
Side by side shot. The Charge comes with anodized aluminum scales have a texture like slightly roughed up slate/chalkboard. The Wave is all stainless.</p>
<p dir="auto"><img src="http://i277.photobucket.com/albums/kk74/leatherxman/IMG_20110708_122754.jpg" alt="" class="img-markdown  img-fluid" /><br />
Charge has a 154CM blade  <img src="/assets/uploads/smileys/drool.gif" alt=":drool:" title="drool" class="forum-smiley emoji" /> while the Wave has 420HC.</p>
<p dir="auto"><img src="http://i277.photobucket.com/albums/kk74/leatherxman/IMG_20110708_122842.jpg" alt="" class="img-markdown  img-fluid" /><br />
Both tools come with a 420HC Sheepsfoot Serrated Knife..the Charge comes with a cutting hook on its top though.</p>
<p dir="auto"><img src="http://i277.photobucket.com/albums/kk74/leatherxman/IMG_20110708_123009.jpg" alt="" class="img-markdown  img-fluid" /><br />
Almost the same tools in each. No scissors in the Charge-replaced with another driver.</p>
<p dir="auto"><img src="http://i277.photobucket.com/albums/kk74/leatherxman/IMG_20110708_123125.jpg" alt="" class="img-markdown  img-fluid" /><br />
Charge seems to be just a wee bit thicker than the Wave. Could be just me though.</p>
<p dir="auto">Double bits holders in the Charge ALX seem a bit odd. You could go Charge AL to get scissors instead but you lose the cool and very handy cutting hook. You gotta spring for the Ti handle Charge to get the perfect combo of cutting hook, scissors, and a single bit holder.</p>
<p dir="auto">In all if you can spare the cash for a Charge i say go for it. It does seem to be finished a bit better than my Wave. Feels better in the hand too..a bit less slippery. The higher quality blade and cutting hook are welcome upgrades. I'll put a good year of work on it and give an updated review on how the Charge holds up. Not sure how the anodized handles will hold up compared to the Waves.</p>
<p dir="auto">if someone has a well used anodized AL or ALX share your pics ...i'm curious :D</p>
]]></description><link>https://forum.multitool.org/topic/29135/charge-alx-vs-wave-post2004</link><generator>RSS for Node</generator><lastBuildDate>Fri, 20 Nov 2026 18:32:16 GMT</lastBuildDate><atom:link href="https://forum.multitool.org/topic/29135.rss" rel="self" type="application/rss+xml"/><pubDate>Fri, 08 Jul 2011 18:08:26 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to Charge ALX vs Wave (post2004) on Thu, 17 Nov 2011 16:49:34 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/pacu" aria-label="Profile: Pacu">@<bdi>Pacu</bdi></a> <a href="/post/539241">said</a>:</p>
<p dir="auto">@Mr. Whippy <a href="/post/539240">said</a>:</p>
<blockquote></blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/kinskibrain" aria-label="Profile: kinskibrain">@<bdi>kinskibrain</bdi></a> <a href="/post/539236">said</a>:</p>
<blockquote>
<blockquote>
<p dir="auto">Personally I'd rather have scissors than a hook, <strong>and I don't like the crimper in the ALX pliers.</strong>. which is why I own the AL!   :D</p>
<p dir="auto">I am surprised you don't feel more difference in use. I had the Wave and sold it. Cut some wood with it and your in for some serious pain. The Charge ergonomics are a big improvement, and by far the largest and most important difference between the Wave and the Charge in my view.</p>
<p dir="auto">I'm not a fan of the TTi either. I think the Wave has the perfect set up.. which is why the Ti and AL are my favourite.</p>
</blockquote>
<p dir="auto">So this begs the question:  "What can you use the cap crimper for?"</p>
<p dir="auto">Well, my #1 use for the cap crimper opening is pulling R clips and cotter pins, so that they aren't damaged.  If Leathermans came with the option of a standard blunt nose (like the old Gerber MultiPliers), this wouldn't be critical, but with the long needlenose plier tip, the standard jaws are too far back to use for pulling clips.</p>
</blockquote>
<p dir="auto">why don't you just use a Crunch then  <img src="/assets/uploads/smileys/poke2.gif" alt=":pok:" title="pok" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/poke2.gif" alt=":pok:" title="pok" class="forum-smiley emoji" /> ;) :D</p>
</blockquote>
<p dir="auto">Well now, that's the start of another thread... &gt;:D</p>
<p dir="auto">Needless to say... :D</p>
]]></description><link>https://forum.multitool.org/post/539247</link><guid isPermaLink="true">https://forum.multitool.org/post/539247</guid><dc:creator><![CDATA[Mr. Whippy]]></dc:creator><pubDate>Thu, 17 Nov 2011 16:49:34 GMT</pubDate></item><item><title><![CDATA[Reply to Charge ALX vs Wave (post2004) on Thu, 17 Nov 2011 16:36:35 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@Mr. Whippy <a href="/post/539240">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/kinskibrain" aria-label="Profile: kinskibrain">@<bdi>kinskibrain</bdi></a> <a href="/post/539236">said</a>:</p>
<blockquote>
<p dir="auto">Personally I'd rather have scissors than a hook, <strong>and I don't like the crimper in the ALX pliers.</strong>. which is why I own the AL!   :D</p>
<p dir="auto">I am surprised you don't feel more difference in use. I had the Wave and sold it. Cut some wood with it and your in for some serious pain. The Charge ergonomics are a big improvement, and by far the largest and most important difference between the Wave and the Charge in my view.</p>
<p dir="auto">I'm not a fan of the TTi either. I think the Wave has the perfect set up.. which is why the Ti and AL are my favourite.</p>
</blockquote>
<p dir="auto">So this begs the question:  "What can you use the cap crimper for?"</p>
<p dir="auto">Well, my #1 use for the cap crimper opening is pulling R clips and cotter pins, so that they aren't damaged.  If Leathermans came with the option of a standard blunt nose (like the old Gerber MultiPliers), this wouldn't be critical, but with the long needlenose plier tip, the standard jaws are too far back to use for pulling clips.</p>
</blockquote>
<p dir="auto">why don't you just use a Crunch then  <img src="/assets/uploads/smileys/poke2.gif" alt=":pok:" title="pok" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/poke2.gif" alt=":pok:" title="pok" class="forum-smiley emoji" /> ;) :D</p>
]]></description><link>https://forum.multitool.org/post/539241</link><guid isPermaLink="true">https://forum.multitool.org/post/539241</guid><dc:creator><![CDATA[Pacu]]></dc:creator><pubDate>Thu, 17 Nov 2011 16:36:35 GMT</pubDate></item><item><title><![CDATA[Reply to Charge ALX vs Wave (post2004) on Thu, 17 Nov 2011 16:32:38 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/kinskibrain" aria-label="Profile: kinskibrain">@<bdi>kinskibrain</bdi></a> <a href="/post/539236">said</a>:<br />
Personally I'd rather have scissors than a hook, <strong>and I don't like the crimper in the ALX pliers.</strong>. which is why I own the AL!   :D</p>
<p dir="auto">I am surprised you don't feel more difference in use. I had the Wave and sold it. Cut some wood with it and your in for some serious pain. The Charge ergonomics are a big improvement, and by far the largest and most important difference between the Wave and the Charge in my view.</p>
<p dir="auto">I'm not a fan of the TTi either. I think the Wave has the perfect set up.. which is why the Ti and AL are my favourite.</p>
</blockquote>
<p dir="auto">So this begs the question:  "What can you use the cap crimper for?"</p>
<p dir="auto">Well, my #1 use for the cap crimper opening is pulling R clips and cotter pins, so that they aren't damaged.  If Leathermans came with the option of a standard blunt nose (like the old Gerber MultiPliers), this wouldn't be critical, but with the long needlenose plier tip, the standard jaws are too far back to use for pulling clips.</p>
]]></description><link>https://forum.multitool.org/post/539240</link><guid isPermaLink="true">https://forum.multitool.org/post/539240</guid><dc:creator><![CDATA[Mr. Whippy]]></dc:creator><pubDate>Thu, 17 Nov 2011 16:32:38 GMT</pubDate></item><item><title><![CDATA[Reply to Charge ALX vs Wave (post2004) on Thu, 17 Nov 2011 16:27:18 GMT]]></title><description><![CDATA[<p dir="auto">at first i didn't care for the crimpers but after installing 34 speaker horns over 3 weeks in the ceiling at work i'm glad they were there.</p>
]]></description><link>https://forum.multitool.org/post/539239</link><guid isPermaLink="true">https://forum.multitool.org/post/539239</guid><dc:creator><![CDATA[Pacu]]></dc:creator><pubDate>Thu, 17 Nov 2011 16:27:18 GMT</pubDate></item><item><title><![CDATA[Reply to Charge ALX vs Wave (post2004) on Thu, 17 Nov 2011 16:16:56 GMT]]></title><description><![CDATA[<p dir="auto">Personally I'd rather have scissors than a hook, and I don't like the crimper in the ALX pliers.. which is why I own the AL!   :D</p>
<p dir="auto">I am surprised you don't feel more difference in use. I had the Wave and sold it. Cut some wood with it and your in for some serious pain. The Charge ergonomics are a big improvement, and by far the largest and most important difference between the Wave and the Charge in my view.</p>
<p dir="auto">I'm not a fan of the TTi either. I think the Wave has the perfect set up.. which is why the Ti and AL are my favourite.</p>
]]></description><link>https://forum.multitool.org/post/539236</link><guid isPermaLink="true">https://forum.multitool.org/post/539236</guid><dc:creator><![CDATA[kinskibrain]]></dc:creator><pubDate>Thu, 17 Nov 2011 16:16:56 GMT</pubDate></item><item><title><![CDATA[Reply to Charge ALX vs Wave (post2004) on Thu, 17 Nov 2011 14:20:27 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/pacu" aria-label="Profile: Pacu">@<bdi>Pacu</bdi></a> <a href="/post/539209">said</a>:<br />
Well i've been using my Charge since July nonstop daily at work. A few things i have noticed about the Charge ...</p>
<p dir="auto">It doesn't close as smoothly as my wave- the pliers get stuck/caught sometimes when closing on its self.</p>
<p dir="auto">The 154CM blade does retain an edge a lot better than the wave- but it chips more. My wave is smooth yet dull after tons of use-the Charge would still cut but i could see very small chips in the edge of the blade. After a few swipes on Lansky it was good as new. The wave takes a bit longer to sharpen up.</p>
<p dir="auto">The black finish holds up very well. After sliding it back and forth all night to other team members on a smooth concrete floor it dusted off no worse for the wear.</p>
<p dir="auto">The hook/serrated blade is prob the best tool on it. So many uses besides its intended job. I use it quite a bit to grab the end of a fishtape in the wall. Cut electrical tape off cat5.</p>
<p dir="auto">About another 6 months i should have the leather sheath broken in to a softness like my ole wave sheath. ;)</p>
</blockquote>
<p dir="auto">This closely parallels my feelings about the Charge ALX.  That guthook is an awesome tool.  Glad you like it.</p>
<p dir="auto">:)</p>
]]></description><link>https://forum.multitool.org/post/539217</link><guid isPermaLink="true">https://forum.multitool.org/post/539217</guid><dc:creator><![CDATA[Mr. Whippy]]></dc:creator><pubDate>Thu, 17 Nov 2011 14:20:27 GMT</pubDate></item><item><title><![CDATA[Reply to Charge ALX vs Wave (post2004) on Thu, 17 Nov 2011 13:18:09 GMT]]></title><description><![CDATA[<p dir="auto">Well i've been using my Charge since July nonstop daily at work. A few things i have noticed about the Charge ...</p>
<p dir="auto">It doesn't close as smoothly as my wave- the pliers get stuck/caught sometimes when closing on its self.</p>
<p dir="auto">The 154CM blade does retain an edge a lot better than the wave- but it chips more. My wave is smooth yet dull after tons of use-the Charge would still cut but i could see very small chips in the edge of the blade. After a few swipes on Lansky it was good as new. The wave takes a bit longer to sharpen up.</p>
<p dir="auto">The black finish holds up very well. After sliding it back and forth all night to other team members on a smooth concrete floor it dusted off no worse for the wear.</p>
<p dir="auto">The hook/serrated blade is prob the best tool on it. So many uses besides its intended job. I use it quite a bit to grab the end of a fishtape in the wall. Cut electrical tape off cat5.</p>
<p dir="auto">About another 6 months i should have the leather sheath broken in to a softness like my ole wave sheath. ;)</p>
]]></description><link>https://forum.multitool.org/post/539209</link><guid isPermaLink="true">https://forum.multitool.org/post/539209</guid><dc:creator><![CDATA[Pacu]]></dc:creator><pubDate>Thu, 17 Nov 2011 13:18:09 GMT</pubDate></item><item><title><![CDATA[Reply to Charge ALX vs Wave (post2004) on Sat, 09 Jul 2011 00:18:11 GMT]]></title><description><![CDATA[<p dir="auto">Great side-by-side comparison Jason! <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
<p dir="auto">One other important point for those considering buying one of these tools new; the Charge models come with the accessory bits, bit holder, pocket clip, and lanyard ring, whereas with the Wave model these items must be purchased seperately. <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /></p>
]]></description><link>https://forum.multitool.org/post/500163</link><guid isPermaLink="true">https://forum.multitool.org/post/500163</guid><dc:creator><![CDATA[J-sews]]></dc:creator><pubDate>Sat, 09 Jul 2011 00:18:11 GMT</pubDate></item><item><title><![CDATA[Reply to Charge ALX vs Wave (post2004) on Fri, 08 Jul 2011 18:53:32 GMT]]></title><description><![CDATA[<p dir="auto">Did you use your poor pliers to short a circuit? More importantly, was it intentional?  <img src="/assets/uploads/smileys/rofl.gif" alt=":rofl:" title="rofl" class="forum-smiley emoji" /></p>
]]></description><link>https://forum.multitool.org/post/500108</link><guid isPermaLink="true">https://forum.multitool.org/post/500108</guid><dc:creator><![CDATA[airballrad]]></dc:creator><pubDate>Fri, 08 Jul 2011 18:53:32 GMT</pubDate></item><item><title><![CDATA[Reply to Charge ALX vs Wave (post2004) on Fri, 08 Jul 2011 18:43:46 GMT]]></title><description><![CDATA[<p dir="auto">Close up of the jaws:</p>
<p dir="auto"><img src="http://i190.photobucket.com/albums/z231/bluebadger88/misc/Worn%20EDC/aaa006.jpg" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://forum.multitool.org/post/500105</link><guid isPermaLink="true">https://forum.multitool.org/post/500105</guid><dc:creator><![CDATA[Mr. Whippy]]></dc:creator><pubDate>Fri, 08 Jul 2011 18:43:46 GMT</pubDate></item><item><title><![CDATA[Reply to Charge ALX vs Wave (post2004) on Fri, 08 Jul 2011 18:30:14 GMT]]></title><description><![CDATA[<p dir="auto">Here's mine from about a year or so ago.  It's more beat up now.  :D</p>
<p dir="auto"><img src="http://i190.photobucket.com/albums/z231/bluebadger88/misc/Worn%20EDC/aaa005.jpg" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://forum.multitool.org/post/500101</link><guid isPermaLink="true">https://forum.multitool.org/post/500101</guid><dc:creator><![CDATA[Mr. Whippy]]></dc:creator><pubDate>Fri, 08 Jul 2011 18:30:14 GMT</pubDate></item></channel></rss>