<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[First Dismantled SAK]]></title><description><![CDATA[<p dir="auto">Ok so today I invested in a Dermal 3000 to take apart my first SAK and used my Huntsman as I've never been happy with the snap of the tools.</p>
<p dir="auto">I was a little but nervous as I am not one for using a drill lol</p>
<p dir="auto">So I tried to make a centre mark and drill and went for it - all pins came out but not without  damage to the  washer things (you will have to forgive me as I forgot the name at this moment).</p>
<p dir="auto">I also had trouble with the back layer tool pin as it was smaller and had a rounded tip (any tips for this one?)</p>
<p dir="auto">So now I have a dismantled Huntsman and now a load of bits with no idea what order to put but in just yet - as with all the excitement of taking apart I forgot to take a note of what goes well lol.</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/53009_ImageUploadedByTapatalk%2021372608234.353941.jpg" alt="ImageUploadedByTapatalk 21372608234.353941.jpg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://forum.multitool.org/topic/45878/first-dismantled-sak</link><generator>RSS for Node</generator><lastBuildDate>Fri, 20 Nov 2026 14:10:22 GMT</lastBuildDate><atom:link href="https://forum.multitool.org/topic/45878.rss" rel="self" type="application/rss+xml"/><pubDate>Sun, 30 Jun 2013 16:04:27 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to First Dismantled SAK on Mon, 12 Aug 2013 05:58:37 GMT]]></title><description><![CDATA[<p dir="auto">The advantage of using pliers over dremel or junior hacksaw is:<br />
With a plier (and I'm speaking of on of those <img src="http://de.wiktionary.org/wiki/Datei:BeisszangeA_fcm.jpg" alt="" class="img-markdown  img-fluid" />) you get a clean and fast cut off. It's the best choice if the rod is already assembled in the knife. After cutting you use a metal file and create a flat end. A junior hacksaw or dremel can be too dangerous (damaging scales, it they are already mounted too). And a dremel with a cutting disc creates to much dust for this particular job. (That dusk you will never get out of the knife again).</p>
<p dir="auto">Having the rod alone, a hack saw or dremel is very good, sind you create a flat end and cut the rod in one working step. And with a cutting disk, you also can create a pike very fast (a mini wet stone is safer, however). A pike is very helpful when assembling your knifes.</p>
]]></description><link>https://forum.multitool.org/post/761702</link><guid isPermaLink="true">https://forum.multitool.org/post/761702</guid><dc:creator><![CDATA[HankSolon]]></dc:creator><pubDate>Mon, 12 Aug 2013 05:58:37 GMT</pubDate></item><item><title><![CDATA[Reply to First Dismantled SAK on Sun, 11 Aug 2013 05:48:53 GMT]]></title><description><![CDATA[<p dir="auto">Thanks guys - working on this today so will let you know what I use - I think my dill as you suggested is going to be the tool of choice.</p>
]]></description><link>https://forum.multitool.org/post/761384</link><guid isPermaLink="true">https://forum.multitool.org/post/761384</guid><dc:creator><![CDATA[Ross]]></dc:creator><pubDate>Sun, 11 Aug 2013 05:48:53 GMT</pubDate></item><item><title><![CDATA[Reply to First Dismantled SAK on Thu, 08 Aug 2013 18:15:27 GMT]]></title><description><![CDATA[<p dir="auto">Ross,</p>
<p dir="auto">If you use pliers you might want to leave the rods a little longer as the rod will deform a bit at the cut<br />
Or as said above use junior hacksaw or a dremel  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://forum.multitool.org/post/760442</link><guid isPermaLink="true">https://forum.multitool.org/post/760442</guid><dc:creator><![CDATA[Sparky415]]></dc:creator><pubDate>Thu, 08 Aug 2013 18:15:27 GMT</pubDate></item><item><title><![CDATA[Reply to First Dismantled SAK on Thu, 08 Aug 2013 16:04:02 GMT]]></title><description><![CDATA[<p dir="auto">Hacksaw or dremel. That's what I use.</p>
<p dir="auto">sent from Ducttapetech's mobile device</p>
]]></description><link>https://forum.multitool.org/post/760401</link><guid isPermaLink="true">https://forum.multitool.org/post/760401</guid><dc:creator><![CDATA[ducttapetech]]></dc:creator><pubDate>Thu, 08 Aug 2013 16:04:02 GMT</pubDate></item><item><title><![CDATA[Reply to First Dismantled SAK on Thu, 08 Aug 2013 14:36:00 GMT]]></title><description><![CDATA[<p dir="auto">But seriously. What about a pliers? Sometimes I use my Proxxon and a cutting disc, just for fun.  :)</p>
]]></description><link>https://forum.multitool.org/post/760359</link><guid isPermaLink="true">https://forum.multitool.org/post/760359</guid><dc:creator><![CDATA[HankSolon]]></dc:creator><pubDate>Thu, 08 Aug 2013 14:36:00 GMT</pubDate></item><item><title><![CDATA[Reply to First Dismantled SAK on Thu, 08 Aug 2013 14:33:51 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/hanksolon" aria-label="Profile: HankSolon">@<bdi>HankSolon</bdi></a> <a href="/post/760354">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/ross" aria-label="Profile: Ross">@<bdi>Ross</bdi></a> <a href="/post/760349">said</a>:</p>
<blockquote>
<p dir="auto">what should I cut the rods with?</p>
</blockquote>
<p dir="auto">What about your teeth?  <img src="/assets/uploads/smileys/poke2.gif" alt=":pok:" title="pok" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">hahaha I like it - perhaps I can send to you to bite on lol.</p>
]]></description><link>https://forum.multitool.org/post/760357</link><guid isPermaLink="true">https://forum.multitool.org/post/760357</guid><dc:creator><![CDATA[Ross]]></dc:creator><pubDate>Thu, 08 Aug 2013 14:33:51 GMT</pubDate></item><item><title><![CDATA[Reply to First Dismantled SAK on Thu, 08 Aug 2013 14:32:10 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/ross" aria-label="Profile: Ross">@<bdi>Ross</bdi></a> <a href="/post/760349">said</a>:<br />
what should I cut the rods with?</p>
</blockquote>
<p dir="auto">What about your teeth?  <img src="/assets/uploads/smileys/poke2.gif" alt=":pok:" title="pok" class="forum-smiley emoji" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/55335_beisser.jpg" alt="beisser.jpg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://forum.multitool.org/post/760354</link><guid isPermaLink="true">https://forum.multitool.org/post/760354</guid><dc:creator><![CDATA[HankSolon]]></dc:creator><pubDate>Thu, 08 Aug 2013 14:32:10 GMT</pubDate></item><item><title><![CDATA[Reply to First Dismantled SAK on Thu, 08 Aug 2013 14:27:19 GMT]]></title><description><![CDATA[<p dir="auto">Thanks to 50ft I know have some rods to put back together my Huntsman :)</p>
<p dir="auto">But these leads me to ask a question I did not give a second thought to - what should I cut the rods with?</p>
]]></description><link>https://forum.multitool.org/post/760349</link><guid isPermaLink="true">https://forum.multitool.org/post/760349</guid><dc:creator><![CDATA[Ross]]></dc:creator><pubDate>Thu, 08 Aug 2013 14:27:19 GMT</pubDate></item><item><title><![CDATA[Reply to First Dismantled SAK on Tue, 09 Jul 2013 20:46:17 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/ross" aria-label="Profile: Ross">@<bdi>Ross</bdi></a> <a href="/post/748364">said</a>:<br />
Cheers for the tips guys - I did find  great way before your tips.</p>
<p dir="auto">I put some soft leather around the spring and divider and with the tool below the spring I used my plier on my Deluxe Tinker to pull the Spring down. It seemed to work pretty well just hope I don't do any damage to the parts.</p>
<p dir="auto">got the knife back together now but <strong>not been able to actually preen or anything as I don't have the brass rods yet</strong> so I keep taking apart and putting back together to get practice.</p>
</blockquote>
<p dir="auto">All parcelled up and ready to go mate  ;) I've got some more parcelled up for a mate over the pond too, and as soon as I can get a window to get to the PO, they'll be on their way  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /> Till then though, keep playing  <img src="/assets/uploads/smileys/poke2.gif" alt=":pok:" title="pok" class="forum-smiley emoji" /> In fact it might be worth practicing on a thinner knife with the old rods from what I've read, so you get the feel of the peening  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://forum.multitool.org/post/748453</link><guid isPermaLink="true">https://forum.multitool.org/post/748453</guid><dc:creator><![CDATA[AimlessWanderer]]></dc:creator><pubDate>Tue, 09 Jul 2013 20:46:17 GMT</pubDate></item><item><title><![CDATA[Reply to First Dismantled SAK on Tue, 09 Jul 2013 16:11:37 GMT]]></title><description><![CDATA[<p dir="auto">Cheers for the tips guys - I did find  great way before your tips.</p>
<p dir="auto">I put some soft leather around the spring and divider and with the tool below the spring I used my plier on my Deluxe Tinker to pull the Spring down. It seemed to work pretty well just hope I don't do any damage to the parts.</p>
<p dir="auto">got the knife back together now but not been able to actually preen or anything as I don't have the brass rods yet so I keep taking apart and putting back together to get practice.</p>
]]></description><link>https://forum.multitool.org/post/748364</link><guid isPermaLink="true">https://forum.multitool.org/post/748364</guid><dc:creator><![CDATA[Ross]]></dc:creator><pubDate>Tue, 09 Jul 2013 16:11:37 GMT</pubDate></item><item><title><![CDATA[Reply to First Dismantled SAK on Fri, 05 Jul 2013 18:32:30 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/tattoosteve99" aria-label="Profile: tattoosteve99">@<bdi>tattoosteve99</bdi></a> <a href="/post/746630">said</a>:<br />
How I align and assemble a sak is I have a block of plastic with the holes drilled in them at the correct place. Then I add the springs followed by the tools, one on the spring one off. Then add the next liner. Using a screwdriver I then apply force to the spring to get the tool to seat and then push the liner into place. Works great and also keeps the pins from bending. They can bend if you don't have the other liner on.</p>
</blockquote>
<p dir="auto">Yep that works great.  I used a chunk of plastic kitchen cutting board.</p>
]]></description><link>https://forum.multitool.org/post/746825</link><guid isPermaLink="true">https://forum.multitool.org/post/746825</guid><dc:creator><![CDATA[Syph007]]></dc:creator><pubDate>Fri, 05 Jul 2013 18:32:30 GMT</pubDate></item><item><title><![CDATA[Reply to First Dismantled SAK on Fri, 05 Jul 2013 04:17:55 GMT]]></title><description><![CDATA[<p dir="auto">How I align and assemble a sak is I have a block of plastic with the holes drilled in them at the correct place. Then I add the springs followed by the tools, one on the spring one off. Then add the next liner. Using a screwdriver I then apply force to the spring to get the tool to seat and then push the liner into place. Works great and also keeps the pins from bending. They can bend if you don't have the other liner on.</p>
]]></description><link>https://forum.multitool.org/post/746630</link><guid isPermaLink="true">https://forum.multitool.org/post/746630</guid><dc:creator><![CDATA[tattoosteve99]]></dc:creator><pubDate>Fri, 05 Jul 2013 04:17:55 GMT</pubDate></item><item><title><![CDATA[Reply to First Dismantled SAK on Thu, 04 Jul 2013 12:33:11 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/ross" aria-label="Profile: Ross">@<bdi>Ross</bdi></a> <a href="/post/745902">said</a>:<br />
any tips for getting those damm springs into place?</p>
</blockquote>
<p dir="auto">For that job I use a Vic Watchmaker-Tool and a lot of practise. The key is to get the backtool in place after that the side tools one after the other. Often (and if the tools don't f%#k into place#) I help myself with a liner. This liner starts the next layer and is added before the last tools are in place. With the help of the liner I fix one side and one back tool (which is easy, since the liner can be bended) and after that I push down the last spring with the watchmaker tool (a screw driver will do it, too) to get the last tool in place.</p>
]]></description><link>https://forum.multitool.org/post/746298</link><guid isPermaLink="true">https://forum.multitool.org/post/746298</guid><dc:creator><![CDATA[HankSolon]]></dc:creator><pubDate>Thu, 04 Jul 2013 12:33:11 GMT</pubDate></item><item><title><![CDATA[Reply to First Dismantled SAK on Wed, 03 Jul 2013 15:07:25 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/lowtech" aria-label="Profile: lowtech">@<bdi>lowtech</bdi></a> <a href="/post/745889">said</a>:<br />
My first reassembly ended with teh blades swapped. And i did not realize it until AFTER peening it back together quite nicely. Of course i destroed a bushing when drilling the pins out again...</p>
</blockquote>
<p dir="auto">Haha annoying as it is, I am glad I can see the funny side  <img src="/assets/uploads/smileys/rofl.gif" alt=":rofl:" title="rofl" class="forum-smiley emoji" /> - any tips for getting those damm springs into place? If only I had the tools that have at the vic shop in London lol just pull a leave and the a couple of rods come out and push all into place!</p>
]]></description><link>https://forum.multitool.org/post/745902</link><guid isPermaLink="true">https://forum.multitool.org/post/745902</guid><dc:creator><![CDATA[Ross]]></dc:creator><pubDate>Wed, 03 Jul 2013 15:07:25 GMT</pubDate></item><item><title><![CDATA[Reply to First Dismantled SAK on Wed, 03 Jul 2013 14:20:55 GMT]]></title><description><![CDATA[<p dir="auto">My first reassembly ended with teh blades swapped. And i did not realize it until AFTER peening it back together quite nicely. Of course i destroed a bushing when drilling the pins out again...</p>
]]></description><link>https://forum.multitool.org/post/745889</link><guid isPermaLink="true">https://forum.multitool.org/post/745889</guid><dc:creator><![CDATA[lowtech]]></dc:creator><pubDate>Wed, 03 Jul 2013 14:20:55 GMT</pubDate></item><item><title><![CDATA[Reply to First Dismantled SAK on Wed, 03 Jul 2013 13:47:22 GMT]]></title><description><![CDATA[<p dir="auto">Ok So while I wait from some brass rods I decided to build on the ones I already took out of the Huntsman just to see if I could get my head around it all  :ahhh</p>
<p dir="auto">First of all I am starting at the end with the Can/Bottle/Reamer tools and after 25 mins of trying to get the tools and springs in place with the liner on top, I close the reamer and it goes in too far  <img src="/assets/uploads/smileys/facepalm.gif" alt=":facepalm:" title="Facepalm" class="forum-smiley emoji" />. I turn to my Swiss Champ for answers and turns out I used the wrong spring - I need the one with the lanyard loop on it!!!!!</p>
<p dir="auto">So now I am using the correct spring and another 25 mins passes and man are those springs hard to get in place and stay in place (any tips lol)! Finally I get everything in place for my first layer and guess what look at this pic and you tell me what has happened  :ahhh! Still you live and learn and all part of the fun.</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/53217_photo.JPG" alt="photo.JPG" class="img-markdown  img-fluid" /></p>
]]></description><link>https://forum.multitool.org/post/745875</link><guid isPermaLink="true">https://forum.multitool.org/post/745875</guid><dc:creator><![CDATA[Ross]]></dc:creator><pubDate>Wed, 03 Jul 2013 13:47:22 GMT</pubDate></item><item><title><![CDATA[Reply to First Dismantled SAK on Tue, 02 Jul 2013 14:00:49 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/enki-ck" aria-label="Profile: enki_ck">@<bdi>enki_ck</bdi></a> <a href="/post/744587">said</a>:<br />
Good luck <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
<p dir="auto">Keep us posted with the results and take lots of pics. :D</p>
<p dir="auto">Here's the layout of all the backsprings and tools from a Champion so that should make it easier for you to put the Huntsman back together.</p>
</blockquote>
<p dir="auto">Not had time to revisit just yet but I will take loads of pics dont worry  :D</p>
<p dir="auto">Thanks for the lay out - I also found this pic taken from when I was at the Vic store building my spartan - top left is the diagram they get you to follow while building your own knife - this is a great source to follow. When I am there next I will take a pic straight on.</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/53155_IMG_0001.jpg" alt="IMG_0001.jpg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://forum.multitool.org/post/745343</link><guid isPermaLink="true">https://forum.multitool.org/post/745343</guid><dc:creator><![CDATA[Ross]]></dc:creator><pubDate>Tue, 02 Jul 2013 14:00:49 GMT</pubDate></item><item><title><![CDATA[Reply to First Dismantled SAK on Tue, 02 Jul 2013 13:57:03 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/syph007" aria-label="Profile: Syph007">@<bdi>Syph007</bdi></a> <a href="/post/744583">said</a>:<br />
I found the best way to get that round pin out without damaging the liners is to mark the center with a punch, then run a small hole in there, about 1.5mm or whatever you have close.  That removes enough inner material from the brass, that the pin will collapse on itself and turn inside out.  You just need to have a 2mm punch and smack it good, and it should pop right out.</p>
<p dir="auto">I used to be lazy and just put the entire side of the SAK against my grinder and sand off all the bushings and take it apart that way in about a minute.  Now Im more careful since I actually want to save the bushings.</p>
</blockquote>
<p dir="auto">Good tips thanks - a few tools I still need to invest in like a punch and a vice to to make life easer and save the brushings but you only learn my the mistakes we make and by reading your great posts  <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /></p>
]]></description><link>https://forum.multitool.org/post/745342</link><guid isPermaLink="true">https://forum.multitool.org/post/745342</guid><dc:creator><![CDATA[Ross]]></dc:creator><pubDate>Tue, 02 Jul 2013 13:57:03 GMT</pubDate></item><item><title><![CDATA[Reply to First Dismantled SAK on Sun, 30 Jun 2013 23:08:00 GMT]]></title><description><![CDATA[<p dir="auto">First SAK I pulled apart was a Wenger and all the liners were the same shape. That made the resulting jigsaw puzzle easier to put back together and the scales clip onto the outer liners not bushings.<br />
I was initially horrified by all the different bits in a Vic, but now I find them easier to work on.</p>
<p dir="auto">I do a lot of my mods with exposed pins so I do manage to keep a good supply of bushings for "normal" builds.</p>
<p dir="auto">My best advice...  Buy some beaters off eBay and practice on them before you rip into a new/expensive/sentimental knife.</p>
]]></description><link>https://forum.multitool.org/post/744678</link><guid isPermaLink="true">https://forum.multitool.org/post/744678</guid><dc:creator><![CDATA[PTRSAK]]></dc:creator><pubDate>Sun, 30 Jun 2013 23:08:00 GMT</pubDate></item><item><title><![CDATA[Reply to First Dismantled SAK on Sun, 30 Jun 2013 17:46:18 GMT]]></title><description><![CDATA[<p dir="auto">Good luck <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
<p dir="auto">Keep us posted with the results and take lots of pics. :D</p>
<p dir="auto">Here's the layout of all the backsprings and tools from a Champion so that should make it easier for you to put the Huntsman back together.</p>
<p dir="auto"><img src="http://forum.multitool.org/index.php?action=dlattach;topic=45878.0;attach=53011;image" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/53011_Anatomy%20of%20a%20Victorinox%20Champion.jpg" alt="Anatomy of a Victorinox Champion.jpg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://forum.multitool.org/post/744587</link><guid isPermaLink="true">https://forum.multitool.org/post/744587</guid><dc:creator><![CDATA[enki_ck]]></dc:creator><pubDate>Sun, 30 Jun 2013 17:46:18 GMT</pubDate></item><item><title><![CDATA[Reply to First Dismantled SAK on Sun, 30 Jun 2013 17:32:32 GMT]]></title><description><![CDATA[<p dir="auto">I found the best way to get that round pin out without damaging the liners is to mark the center with a punch, then run a small hole in there, about 1.5mm or whatever you have close.  That removes enough inner material from the brass, that the pin will collapse on itself and turn inside out.  You just need to have a 2mm punch and smack it good, and it should pop right out.</p>
<p dir="auto">I used to be lazy and just put the entire side of the SAK against my grinder and sand off all the bushings and take it apart that way in about a minute.  Now Im more careful since I actually want to save the bushings.</p>
]]></description><link>https://forum.multitool.org/post/744583</link><guid isPermaLink="true">https://forum.multitool.org/post/744583</guid><dc:creator><![CDATA[Syph007]]></dc:creator><pubDate>Sun, 30 Jun 2013 17:32:32 GMT</pubDate></item><item><title><![CDATA[Reply to First Dismantled SAK on Sun, 30 Jun 2013 16:14:15 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/ross" aria-label="Profile: Ross">@<bdi>Ross</bdi></a> <a href="/post/744561">said</a>:<br />
So now I have a dismantled Huntsman and now a load of bits with no idea what order to put but in just yet - as with all the excitement of taking apart I forgot to take a note of what goes well lol.</p>
</blockquote>
<p dir="auto"><img src="/assets/uploads/smileys/popcorn.gif" alt=":popcorn:" title="Popcorn" class="forum-smiley emoji" /></p>
<p dir="auto">I did more or less the same thing this week as well Ross<br />
So I'm going to watch and learn from what you do  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://forum.multitool.org/post/744563</link><guid isPermaLink="true">https://forum.multitool.org/post/744563</guid><dc:creator><![CDATA[Sparky415]]></dc:creator><pubDate>Sun, 30 Jun 2013 16:14:15 GMT</pubDate></item></channel></rss>