<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[Making a transparent SAK]]></title><description><![CDATA[<p dir="auto">Tonight I made a transparent SAK. &lt;a href="<a href="http://s782.photobucket.com/user/johnwsjr3/media/8F2E0F1D-43B6-4E73-A3AF-CF61486F58A1_zpsrdry6wmb.jpg.html" rel="nofollow ugc">http://s782.photobucket.com/user/johnwsjr3/media/8F2E0F1D-43B6-4E73-A3AF-CF61486F58A1_zpsrdry6wmb.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i782.photobucket.com/albums/yy110/johnwsjr3/8F2E0F1D-43B6-4E73-A3AF-CF61486F58A1_zpsrdry6wmb.jpg" rel="nofollow ugc">http://i782.photobucket.com/albums/yy110/johnwsjr3/8F2E0F1D-43B6-4E73-A3AF-CF61486F58A1_zpsrdry6wmb.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;<br />
The idea is not a new one that I came up with, and I've seen a picture of it done to a buck knife, (somewhere on here) but I haven't seen anyone actually do it with a sak until now. So this is how I did it. The first step was getting the scales. I bought some regular plexiglass from home depot. Important-if the plexiglass has a protective plastic on it, do not take it off until the knife is completely finished. I first traced an old sak scale with marker on the plexiglass, then did a rough cut around it on the scroll saw. &lt;a href="<a href="http://s782.photobucket.com/user/johnwsjr3/media/2FCD71E8-EFAF-456F-A919-0C72B713CB8D_zpssb0lmbtt.jpg.html" rel="nofollow ugc">http://s782.photobucket.com/user/johnwsjr3/media/2FCD71E8-EFAF-456F-A919-0C72B713CB8D_zpssb0lmbtt.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i782.photobucket.com/albums/yy110/johnwsjr3/2FCD71E8-EFAF-456F-A919-0C72B713CB8D_zpssb0lmbtt.jpg" rel="nofollow ugc">http://i782.photobucket.com/albums/yy110/johnwsjr3/2FCD71E8-EFAF-456F-A919-0C72B713CB8D_zpssb0lmbtt.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;<br />
I then carefully cut out the scales by the lines I had traced.&lt;a href="<a href="http://s782.photobucket.com/user/johnwsjr3/media/0AE6A14F-657B-44D1-A530-66E4CDE04751_zpsfehfxfr5.jpg.html" rel="nofollow ugc">http://s782.photobucket.com/user/johnwsjr3/media/0AE6A14F-657B-44D1-A530-66E4CDE04751_zpsfehfxfr5.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i782.photobucket.com/albums/yy110/johnwsjr3/0AE6A14F-657B-44D1-A530-66E4CDE04751_zpsfehfxfr5.jpg" rel="nofollow ugc">http://i782.photobucket.com/albums/yy110/johnwsjr3/0AE6A14F-657B-44D1-A530-66E4CDE04751_zpsfehfxfr5.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;<br />
After cutting on the scroll saw, I sanded the edges with 150 grit sand paper. The next step was getting the knife parts. I had a really junky old explorer lying around so I decided to use that. If you don't know how to dismantle and mod a sak I recommend reading the "A how to for basic sak mods" thread here  <a href="http://forum.multitool.org/the-mod-squad/a-'how-to'-for-basic-sak-mods-pic-heavy/" rel="nofollow ugc">http://forum.multitool.org/the-mod-squad/a-'how-to'-for-basic-sak-mods-pic-heavy/</a>  I took only the blade layer from the sak, because the thinner the final knife, the more transparent it is. I also didn't want the corkscrew sticking out the side, so I put the awl/ reamer in its place.<br />
&lt;a href="<a href="http://s782.photobucket.com/user/johnwsjr3/media/64EE6868-B3F8-4021-B79F-6A648594537D_zps5w0wp90i.jpg.html" rel="nofollow ugc">http://s782.photobucket.com/user/johnwsjr3/media/64EE6868-B3F8-4021-B79F-6A648594537D_zps5w0wp90i.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i782.photobucket.com/albums/yy110/johnwsjr3/64EE6868-B3F8-4021-B79F-6A648594537D_zps5w0wp90i.jpg" rel="nofollow ugc">http://i782.photobucket.com/albums/yy110/johnwsjr3/64EE6868-B3F8-4021-B79F-6A648594537D_zps5w0wp90i.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;<br />
Once I had the parts and the scales, I put the scales together and put dabs of hot glue on the edges. This was only meant to hold them together temporarily, so I didn't use very much.<br />
&lt;a href="<a href="http://s782.photobucket.com/user/johnwsjr3/media/A0A182D1-7323-492D-AC20-198EEB00185E_zpslq9uj9ph.jpg.html" rel="nofollow ugc">http://s782.photobucket.com/user/johnwsjr3/media/A0A182D1-7323-492D-AC20-198EEB00185E_zpslq9uj9ph.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i782.photobucket.com/albums/yy110/johnwsjr3/A0A182D1-7323-492D-AC20-198EEB00185E_zpslq9uj9ph.jpg" rel="nofollow ugc">http://i782.photobucket.com/albums/yy110/johnwsjr3/A0A182D1-7323-492D-AC20-198EEB00185E_zpslq9uj9ph.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;</p>
<p dir="auto">&lt;a href="<a href="http://s782.photobucket.com/user/johnwsjr3/media/F9716EE8-3ED9-4CDB-A103-593FB5EE19A9_zpsceegqsj9.jpg.html" rel="nofollow ugc">http://s782.photobucket.com/user/johnwsjr3/media/F9716EE8-3ED9-4CDB-A103-593FB5EE19A9_zpsceegqsj9.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i782.photobucket.com/albums/yy110/johnwsjr3/F9716EE8-3ED9-4CDB-A103-593FB5EE19A9_zpsceegqsj9.jpg" rel="nofollow ugc">http://i782.photobucket.com/albums/yy110/johnwsjr3/F9716EE8-3ED9-4CDB-A103-593FB5EE19A9_zpsceegqsj9.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;</p>
<p dir="auto">&lt;a href="<a href="http://s782.photobucket.com/user/johnwsjr3/media/D0A3D3A9-A081-4BCA-B835-8421DD5690A5_zps2zscbbkj.jpg.html" rel="nofollow ugc">http://s782.photobucket.com/user/johnwsjr3/media/D0A3D3A9-A081-4BCA-B835-8421DD5690A5_zps2zscbbkj.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i782.photobucket.com/albums/yy110/johnwsjr3/D0A3D3A9-A081-4BCA-B835-8421DD5690A5_zps2zscbbkj.jpg" rel="nofollow ugc">http://i782.photobucket.com/albums/yy110/johnwsjr3/D0A3D3A9-A081-4BCA-B835-8421DD5690A5_zps2zscbbkj.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;<br />
Now that the scales were stuck together, I took a liner from the knife and placed it on top of them. I used a sharpie to mark the plexiglass through the holes in the liner. This is where I drilled the holes for the pins.<br />
&lt;a href="<a href="http://s782.photobucket.com/user/johnwsjr3/media/1CD758B9-0A93-4302-B50C-543DB25D3E6A_zpsfa5aqkdd.jpg.html" rel="nofollow ugc">http://s782.photobucket.com/user/johnwsjr3/media/1CD758B9-0A93-4302-B50C-543DB25D3E6A_zpsfa5aqkdd.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i782.photobucket.com/albums/yy110/johnwsjr3/1CD758B9-0A93-4302-B50C-543DB25D3E6A_zpsfa5aqkdd.jpg" rel="nofollow ugc">http://i782.photobucket.com/albums/yy110/johnwsjr3/1CD758B9-0A93-4302-B50C-543DB25D3E6A_zpsfa5aqkdd.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;</p>
<p dir="auto">&lt;a href="<a href="http://s782.photobucket.com/user/johnwsjr3/media/2B41A68B-EEB7-4F5E-8803-D53495676B8B_zps46wwqwpj.jpg.html" rel="nofollow ugc">http://s782.photobucket.com/user/johnwsjr3/media/2B41A68B-EEB7-4F5E-8803-D53495676B8B_zps46wwqwpj.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i782.photobucket.com/albums/yy110/johnwsjr3/2B41A68B-EEB7-4F5E-8803-D53495676B8B_zps46wwqwpj.jpg" rel="nofollow ugc">http://i782.photobucket.com/albums/yy110/johnwsjr3/2B41A68B-EEB7-4F5E-8803-D53495676B8B_zps46wwqwpj.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;<br />
I then went to the drill press and drilled the holes for the pins, keeping in mind the different sizes for the different pins.<br />
&lt;a href="<a href="http://s782.photobucket.com/user/johnwsjr3/media/381998FF-520D-4D46-AE4E-BAA9FF419E5C_zpstndmqvk5.jpg.html" rel="nofollow ugc">http://s782.photobucket.com/user/johnwsjr3/media/381998FF-520D-4D46-AE4E-BAA9FF419E5C_zpstndmqvk5.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i782.photobucket.com/albums/yy110/johnwsjr3/381998FF-520D-4D46-AE4E-BAA9FF419E5C_zpstndmqvk5.jpg" rel="nofollow ugc">http://i782.photobucket.com/albums/yy110/johnwsjr3/381998FF-520D-4D46-AE4E-BAA9FF419E5C_zpstndmqvk5.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;</p>
<p dir="auto">&lt;a href="<a href="http://s782.photobucket.com/user/johnwsjr3/media/7F94A677-C7BA-49B7-8F0F-71F4773052AF_zps097uslza.jpg.html" rel="nofollow ugc">http://s782.photobucket.com/user/johnwsjr3/media/7F94A677-C7BA-49B7-8F0F-71F4773052AF_zps097uslza.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i782.photobucket.com/albums/yy110/johnwsjr3/7F94A677-C7BA-49B7-8F0F-71F4773052AF_zps097uslza.jpg" rel="nofollow ugc">http://i782.photobucket.com/albums/yy110/johnwsjr3/7F94A677-C7BA-49B7-8F0F-71F4773052AF_zps097uslza.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;<br />
I don't have metric drill bits, so for the larger pins I used a 7/64 drill bit; for the smaller pins I used a 3/32 drill bit. Next I chipped the glue off the sides of the scales using my finger nails. I then had two scales with the proper holes drilled. &lt;a href="<a href="http://s782.photobucket.com/user/johnwsjr3/media/6E78A226-23BE-426B-BA3B-27D945A8EF4A_zpscgdzyg9q.jpg.html" rel="nofollow ugc">http://s782.photobucket.com/user/johnwsjr3/media/6E78A226-23BE-426B-BA3B-27D945A8EF4A_zpscgdzyg9q.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i782.photobucket.com/albums/yy110/johnwsjr3/6E78A226-23BE-426B-BA3B-27D945A8EF4A_zpscgdzyg9q.jpg" rel="nofollow ugc">http://i782.photobucket.com/albums/yy110/johnwsjr3/6E78A226-23BE-426B-BA3B-27D945A8EF4A_zpscgdzyg9q.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;<br />
After that I peened one end of each pin. I did it on the metal table of my scroll saw, but any firm metal surface should work. while I peened, I held the pin with needle-nose vice grips. I used a 4oz ball peen hammer for all of this. &lt;a href="<a href="http://s782.photobucket.com/user/johnwsjr3/media/FB56DED1-2D9A-4102-B806-11D15458A19A_zps69u1okbu.jpg.html" rel="nofollow ugc">http://s782.photobucket.com/user/johnwsjr3/media/FB56DED1-2D9A-4102-B806-11D15458A19A_zps69u1okbu.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i782.photobucket.com/albums/yy110/johnwsjr3/FB56DED1-2D9A-4102-B806-11D15458A19A_zps69u1okbu.jpg" rel="nofollow ugc">http://i782.photobucket.com/albums/yy110/johnwsjr3/FB56DED1-2D9A-4102-B806-11D15458A19A_zps69u1okbu.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;<br />
With one side of each pin peened, I put all the parts in the scales. The nail nick for the awl was covered up, so I drew on the plexiglass with sharpie where it was. I then brought the scale back to the scroll saw and cut out a little arc, similar to how you access the awl on Wenger knives. I then used my dremel to polish the rough edges of the scales. Afterwards, I put all the parts together. I then cut and filed each pin  to an appropriate length and peened them.<br />
&lt;a href="<a href="http://s782.photobucket.com/user/johnwsjr3/media/485F68FD-0782-447F-9DD2-D4BB93CB2953_zpsglmz2nxp.jpg.html" rel="nofollow ugc">http://s782.photobucket.com/user/johnwsjr3/media/485F68FD-0782-447F-9DD2-D4BB93CB2953_zpsglmz2nxp.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i782.photobucket.com/albums/yy110/johnwsjr3/485F68FD-0782-447F-9DD2-D4BB93CB2953_zpsglmz2nxp.jpg" rel="nofollow ugc">http://i782.photobucket.com/albums/yy110/johnwsjr3/485F68FD-0782-447F-9DD2-D4BB93CB2953_zpsglmz2nxp.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;</p>
<p dir="auto">&lt;a href="<a href="http://s782.photobucket.com/user/johnwsjr3/media/561CCD32-B5FB-44DB-82A1-708EAB704DDE_zpsvituju7y.jpg.html" rel="nofollow ugc">http://s782.photobucket.com/user/johnwsjr3/media/561CCD32-B5FB-44DB-82A1-708EAB704DDE_zpsvituju7y.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i782.photobucket.com/albums/yy110/johnwsjr3/561CCD32-B5FB-44DB-82A1-708EAB704DDE_zpsvituju7y.jpg" rel="nofollow ugc">http://i782.photobucket.com/albums/yy110/johnwsjr3/561CCD32-B5FB-44DB-82A1-708EAB704DDE_zpsvituju7y.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;</p>
<p dir="auto">Finally I was done, and had a transparent swiss army knife.<br />
&lt;a href="<a href="http://s782.photobucket.com/user/johnwsjr3/media/54178CCC-8EA2-48A8-B2C1-C430E25782DF_zpsnjlgrjdv.jpg.html" rel="nofollow ugc">http://s782.photobucket.com/user/johnwsjr3/media/54178CCC-8EA2-48A8-B2C1-C430E25782DF_zpsnjlgrjdv.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i782.photobucket.com/albums/yy110/johnwsjr3/54178CCC-8EA2-48A8-B2C1-C430E25782DF_zpsnjlgrjdv.jpg" rel="nofollow ugc">http://i782.photobucket.com/albums/yy110/johnwsjr3/54178CCC-8EA2-48A8-B2C1-C430E25782DF_zpsnjlgrjdv.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;</p>
<p dir="auto">&lt;a href="<a href="http://s782.photobucket.com/user/johnwsjr3/media/8F2E0F1D-43B6-4E73-A3AF-CF61486F58A1_zpsrdry6wmb.jpg.html" rel="nofollow ugc">http://s782.photobucket.com/user/johnwsjr3/media/8F2E0F1D-43B6-4E73-A3AF-CF61486F58A1_zpsrdry6wmb.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i782.photobucket.com/albums/yy110/johnwsjr3/8F2E0F1D-43B6-4E73-A3AF-CF61486F58A1_zpsrdry6wmb.jpg" rel="nofollow ugc">http://i782.photobucket.com/albums/yy110/johnwsjr3/8F2E0F1D-43B6-4E73-A3AF-CF61486F58A1_zpsrdry6wmb.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;</p>
<p dir="auto">&lt;a href="<a href="http://s782.photobucket.com/user/johnwsjr3/media/DA4ECB8D-3CFC-42A5-B885-FEA67FB51F51_zpsamvkwiyb.jpg.html" rel="nofollow ugc">http://s782.photobucket.com/user/johnwsjr3/media/DA4ECB8D-3CFC-42A5-B885-FEA67FB51F51_zpsamvkwiyb.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i782.photobucket.com/albums/yy110/johnwsjr3/DA4ECB8D-3CFC-42A5-B885-FEA67FB51F51_zpsamvkwiyb.jpg" rel="nofollow ugc">http://i782.photobucket.com/albums/yy110/johnwsjr3/DA4ECB8D-3CFC-42A5-B885-FEA67FB51F51_zpsamvkwiyb.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;</p>
<p dir="auto">&lt;a href="<a href="http://s782.photobucket.com/user/johnwsjr3/media/7C770BBF-1DCC-4E8C-BE7F-42B1268DD26A_zpshwn9e605.jpg.html" rel="nofollow ugc">http://s782.photobucket.com/user/johnwsjr3/media/7C770BBF-1DCC-4E8C-BE7F-42B1268DD26A_zpshwn9e605.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i782.photobucket.com/albums/yy110/johnwsjr3/7C770BBF-1DCC-4E8C-BE7F-42B1268DD26A_zpshwn9e605.jpg" rel="nofollow ugc">http://i782.photobucket.com/albums/yy110/johnwsjr3/7C770BBF-1DCC-4E8C-BE7F-42B1268DD26A_zpshwn9e605.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;</p>
<p dir="auto">It doesn't look so great with my cell phone photos in low light, but in real life it's beautiful! :)</p>
]]></description><link>https://forum.multitool.org/topic/49287/making-a-transparent-sak</link><generator>RSS for Node</generator><lastBuildDate>Fri, 20 Nov 2026 14:20:45 GMT</lastBuildDate><atom:link href="https://forum.multitool.org/topic/49287.rss" rel="self" type="application/rss+xml"/><pubDate>Wed, 01 Jan 2014 07:00:43 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to Making a transparent SAK on Tue, 07 Jan 2014 03:54:19 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/nhoj" aria-label="Profile: Nhoj">@<bdi>Nhoj</bdi></a> <a href="/post/824878">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/monrogue" aria-label="Profile: Monrogue">@<bdi>Monrogue</bdi></a> <a href="/post/824877">said</a>:</p>
<blockquote></blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/nhoj" aria-label="Profile: Nhoj">@<bdi>Nhoj</bdi></a> <a href="/post/824866">said</a>:</p>
<blockquote>
<blockquote>
<p dir="auto">Thank you for the comments everyone. I am very grateful for your responses. In making this I went through a lot of trial and error with the scales. First I was using some old plexiglass I had but ran out after one complete scale and one cut wrong. I bought some new plexiglass and made a second scale, but decided I wanted both to be made out of the same plexiglass so I scrapped the original one. I then came onto a different problem. The sharpie marker I traced the scale with would turn into a thick liquid ooze while cutting and harden into a sort of glue. This ruined a few scale attempts. Eventually, I finally had two scales that met my approval and was ready to assemble the knife. Unfortunately while polishing the edge of one of the scales though, I polished a little too much and created a divot in the side of the scale. This set me back awhile but I finally made a new one and had two scales finished. My advise to anyone doing this is not get frustrated with the scales. They may take several attempts but is is worth it to get them right.</p>
</blockquote>
<p dir="auto">Wow, it sounds like you went through quite an ordeal with the scales.  I'm glad you stuck with it as your persistence definitely paid off with good results buddy <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">Thanks :) I really am grateful for your, and everybody else's appreciation.</p>
</blockquote>
<p dir="auto"><img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /> :D</p>
]]></description><link>https://forum.multitool.org/post/824880</link><guid isPermaLink="true">https://forum.multitool.org/post/824880</guid><dc:creator><![CDATA[Monrogue]]></dc:creator><pubDate>Tue, 07 Jan 2014 03:54:19 GMT</pubDate></item><item><title><![CDATA[Reply to Making a transparent SAK on Tue, 07 Jan 2014 03:47:25 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/monrogue" aria-label="Profile: Monrogue">@<bdi>Monrogue</bdi></a> <a href="/post/824877">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/nhoj" aria-label="Profile: Nhoj">@<bdi>Nhoj</bdi></a> <a href="/post/824866">said</a>:</p>
<blockquote>
<p dir="auto">Thank you for the comments everyone. I am very grateful for your responses. In making this I went through a lot of trial and error with the scales. First I was using some old plexiglass I had but ran out after one complete scale and one cut wrong. I bought some new plexiglass and made a second scale, but decided I wanted both to be made out of the same plexiglass so I scrapped the original one. I then came onto a different problem. The sharpie marker I traced the scale with would turn into a thick liquid ooze while cutting and harden into a sort of glue. This ruined a few scale attempts. Eventually, I finally had two scales that met my approval and was ready to assemble the knife. Unfortunately while polishing the edge of one of the scales though, I polished a little too much and created a divot in the side of the scale. This set me back awhile but I finally made a new one and had two scales finished. My advise to anyone doing this is not get frustrated with the scales. They may take several attempts but is is worth it to get them right.</p>
</blockquote>
<p dir="auto">Wow, it sounds like you went through quite an ordeal with the scales.  I'm glad you stuck with it as your persistence definitely paid off with good results buddy <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">Thanks :) I really am grateful for your, and everybody else's appreciation.</p>
]]></description><link>https://forum.multitool.org/post/824878</link><guid isPermaLink="true">https://forum.multitool.org/post/824878</guid><dc:creator><![CDATA[Nhoj]]></dc:creator><pubDate>Tue, 07 Jan 2014 03:47:25 GMT</pubDate></item><item><title><![CDATA[Reply to Making a transparent SAK on Tue, 07 Jan 2014 03:46:04 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/nhoj" aria-label="Profile: Nhoj">@<bdi>Nhoj</bdi></a> <a href="/post/824866">said</a>:<br />
Thank you for the comments everyone. I am very grateful for your responses. In making this I went through a lot of trial and error with the scales. First I was using some old plexiglass I had but ran out after one complete scale and one cut wrong. I bought some new plexiglass and made a second scale, but decided I wanted both to be made out of the same plexiglass so I scrapped the original one. I then came onto a different problem. The sharpie marker I traced the scale with would turn into a thick liquid ooze while cutting and harden into a sort of glue. This ruined a few scale attempts. Eventually, I finally had two scales that met my approval and was ready to assemble the knife. Unfortunately while polishing the edge of one of the scales though, I polished a little too much and created a divot in the side of the scale. This set me back awhile but I finally made a new one and had two scales finished. My advise to anyone doing this is not get frustrated with the scales. They may take several attempts but is is worth it to get them right.</p>
</blockquote>
<p dir="auto">Wow, it sounds like you went through quite an ordeal with the scales.  I'm glad you stuck with it as your persistence definitely paid off with good results buddy <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://forum.multitool.org/post/824877</link><guid isPermaLink="true">https://forum.multitool.org/post/824877</guid><dc:creator><![CDATA[Monrogue]]></dc:creator><pubDate>Tue, 07 Jan 2014 03:46:04 GMT</pubDate></item><item><title><![CDATA[Reply to Making a transparent SAK on Tue, 07 Jan 2014 03:00:16 GMT]]></title><description><![CDATA[<p dir="auto">Thank you for the comments everyone. I am very grateful for your responses. In making this I went through a lot of trial and error with the scales. First I was using some old plexiglass I had but ran out after one complete scale and one cut wrong. I bought some new plexiglass and made a second scale, but decided I wanted both to be made out of the same plexiglass so I scrapped the original one. I then came onto a different problem. The sharpie marker I traced the scale with would turn into a thick liquid ooze while cutting and harden into a sort of glue. This ruined a few scale attempts. Eventually, I finally had two scales that met my approval and was ready to assemble the knife. Unfortunately while polishing the edge of one of the scales though, I polished a little too much and created a divot in the side of the scale. This set me back awhile but I finally made a new one and had two scales finished. My advise to anyone doing this is not get frustrated with the scales. They may take several attempts but is is worth it to get them right.</p>
]]></description><link>https://forum.multitool.org/post/824866</link><guid isPermaLink="true">https://forum.multitool.org/post/824866</guid><dc:creator><![CDATA[Nhoj]]></dc:creator><pubDate>Tue, 07 Jan 2014 03:00:16 GMT</pubDate></item><item><title><![CDATA[Reply to Making a transparent SAK on Tue, 07 Jan 2014 00:19:42 GMT]]></title><description><![CDATA[<p dir="auto">Hey Nhoj<br />
Thanks for sharing this with us.<br />
I echo everyone's comments.</p>
<ul>
<li>
<p dir="auto">Inspirational idea</p>
</li>
<li>
<p dir="auto">Great execution</p>
</li>
<li>
<p dir="auto">Fabulous step by step DIY guide</p>
</li>
<li>
<p dir="auto">Beautiful finished product</p>
</li>
</ul>
<p dir="auto">I am tempted to try and build one for myself.<br />
For someone like me who always wants to know how things work - This is just great and it looks amazing too!</p>
<p dir="auto">Well done :)</p>
]]></description><link>https://forum.multitool.org/post/824803</link><guid isPermaLink="true">https://forum.multitool.org/post/824803</guid><dc:creator><![CDATA[Huntsman]]></dc:creator><pubDate>Tue, 07 Jan 2014 00:19:42 GMT</pubDate></item><item><title><![CDATA[Reply to Making a transparent SAK on Mon, 06 Jan 2014 22:26:46 GMT]]></title><description><![CDATA[<p dir="auto">Truly exceptional.</p>
]]></description><link>https://forum.multitool.org/post/824765</link><guid isPermaLink="true">https://forum.multitool.org/post/824765</guid><dc:creator><![CDATA[kkokkolis]]></dc:creator><pubDate>Mon, 06 Jan 2014 22:26:46 GMT</pubDate></item><item><title><![CDATA[Reply to Making a transparent SAK on Mon, 06 Jan 2014 21:41:29 GMT]]></title><description><![CDATA[<p dir="auto">Good idea and very nice result !</p>
]]></description><link>https://forum.multitool.org/post/824746</link><guid isPermaLink="true">https://forum.multitool.org/post/824746</guid><dc:creator><![CDATA[Michel M.]]></dc:creator><pubDate>Mon, 06 Jan 2014 21:41:29 GMT</pubDate></item><item><title><![CDATA[Reply to Making a transparent SAK on Sun, 05 Jan 2014 21:14:41 GMT]]></title><description><![CDATA[<p dir="auto">That is a lovely piece of work mate,well done <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /></p>
]]></description><link>https://forum.multitool.org/post/824330</link><guid isPermaLink="true">https://forum.multitool.org/post/824330</guid><dc:creator><![CDATA[kirk13]]></dc:creator><pubDate>Sun, 05 Jan 2014 21:14:41 GMT</pubDate></item><item><title><![CDATA[Reply to Making a transparent SAK on Sun, 05 Jan 2014 21:09:55 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/syph007" aria-label="Profile: Syph007">@<bdi>Syph007</bdi></a> <a href="/post/822958">said</a>:<br />
We need some of that transparent aluminum from star trek.   <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">Scotty, Bones! Quit messing around with that whale and get back to work!   <img src="/assets/uploads/smileys/facepalm.gif" alt=":facepalm:" title="Facepalm" class="forum-smiley emoji" /></p>
<p dir="auto">Otherwise Nhoj, that is very nice work and I almost hate to admit that I really understand what's going on inside my SAK now!  <img src="/assets/uploads/smileys/1196453940-SAKgif.gif" alt=":climber:" title=":climber:" class="forum-smiley emoji" /></p>
]]></description><link>https://forum.multitool.org/post/824329</link><guid isPermaLink="true">https://forum.multitool.org/post/824329</guid><dc:creator><![CDATA[n4vgm]]></dc:creator><pubDate>Sun, 05 Jan 2014 21:09:55 GMT</pubDate></item><item><title><![CDATA[Reply to Making a transparent SAK on Sat, 04 Jan 2014 00:07:19 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/srmultiherramienta" aria-label="Profile: Sr.Multiherramienta">@<bdi>Sr.Multiherramienta</bdi></a> <a href="/post/823438">said</a>:<br />
Fantastic! It has to be nice to see the springs working. Post a video, please!  ;)</p>
</blockquote>
<p dir="auto">I'd like to, but on Tapatalk I don't think I can.</p>
]]></description><link>https://forum.multitool.org/post/823439</link><guid isPermaLink="true">https://forum.multitool.org/post/823439</guid><dc:creator><![CDATA[Nhoj]]></dc:creator><pubDate>Sat, 04 Jan 2014 00:07:19 GMT</pubDate></item><item><title><![CDATA[Reply to Making a transparent SAK on Sat, 04 Jan 2014 00:05:45 GMT]]></title><description><![CDATA[<p dir="auto">Fantastic! It has to be nice to see the springs working. Post a video, please!  ;)</p>
]]></description><link>https://forum.multitool.org/post/823438</link><guid isPermaLink="true">https://forum.multitool.org/post/823438</guid><dc:creator><![CDATA[Sr.Multiherramienta]]></dc:creator><pubDate>Sat, 04 Jan 2014 00:05:45 GMT</pubDate></item><item><title><![CDATA[Reply to Making a transparent SAK on Fri, 03 Jan 2014 01:47:17 GMT]]></title><description><![CDATA[<p dir="auto">Very impressive work Nhoj! I like that a lot :)</p>
]]></description><link>https://forum.multitool.org/post/822969</link><guid isPermaLink="true">https://forum.multitool.org/post/822969</guid><dc:creator><![CDATA[J-sews]]></dc:creator><pubDate>Fri, 03 Jan 2014 01:47:17 GMT</pubDate></item><item><title><![CDATA[Reply to Making a transparent SAK on Fri, 03 Jan 2014 01:30:17 GMT]]></title><description><![CDATA[<p dir="auto">Nice job <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /> JR</p>
]]></description><link>https://forum.multitool.org/post/822964</link><guid isPermaLink="true">https://forum.multitool.org/post/822964</guid><dc:creator><![CDATA[MadPlumbarian]]></dc:creator><pubDate>Fri, 03 Jan 2014 01:30:17 GMT</pubDate></item><item><title><![CDATA[Reply to Making a transparent SAK on Fri, 03 Jan 2014 01:10:45 GMT]]></title><description><![CDATA[<p dir="auto">We need some of that transparent aluminum from star trek.   <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://forum.multitool.org/post/822958</link><guid isPermaLink="true">https://forum.multitool.org/post/822958</guid><dc:creator><![CDATA[Syph007]]></dc:creator><pubDate>Fri, 03 Jan 2014 01:10:45 GMT</pubDate></item><item><title><![CDATA[Reply to Making a transparent SAK on Fri, 03 Jan 2014 00:00:05 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/ombudsman" aria-label="Profile: Ombudsman">@<bdi>Ombudsman</bdi></a> <a href="/post/822464">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/tosh" aria-label="Profile: tosh">@<bdi>tosh</bdi></a> <a href="/post/822074">said</a>:</p>
<blockquote>
<p dir="auto">I'm surprised the plexiglass withstands the stress/tension. I would never have thought it could.</p>
</blockquote>
<p dir="auto">I was thinking the same  <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /> cuz Syph007 did something similar in this thread: <a href="http://forum.multitool.org/the-mod-squad/playing-with-polycarbonate-today/msg565953/#msg565953" rel="nofollow ugc">Playing with polycarbonate</a></p>
<p dir="auto">And he said Plexi will crack very easy, but you can literally beat Polycarbonate with a hammer and it will not.</p>
<p dir="auto"><img src="http://i1117.photobucket.com/albums/k587/Syph007/Lexan/IMG_1898.jpg" alt="" class="img-markdown  img-fluid" /></p>
</blockquote>
<p dir="auto">I don't think there is any risk of the plexiglass cracking. It can snap the thin way but the way that the stress is applied in the knife it's pretty strong.</p>
]]></description><link>https://forum.multitool.org/post/822928</link><guid isPermaLink="true">https://forum.multitool.org/post/822928</guid><dc:creator><![CDATA[Nhoj]]></dc:creator><pubDate>Fri, 03 Jan 2014 00:00:05 GMT</pubDate></item><item><title><![CDATA[Reply to Making a transparent SAK on Thu, 02 Jan 2014 04:51:31 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/ombudsman" aria-label="Profile: Ombudsman">@<bdi>Ombudsman</bdi></a> <a href="/post/822464">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/tosh" aria-label="Profile: tosh">@<bdi>tosh</bdi></a> <a href="/post/822074">said</a>:</p>
<blockquote>
<p dir="auto">I'm surprised the plexiglass withstands the stress/tension. I would never have thought it could.</p>
</blockquote>
<p dir="auto">I was thinking the same  <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /> cuz Syph007 did something similar in this thread: <a href="http://forum.multitool.org/the-mod-squad/playing-with-polycarbonate-today/msg565953/#msg565953" rel="nofollow ugc">Playing with polycarbonate</a></p>
<p dir="auto">And he said Plexi will crack very easy, but you can literally beat Polycarbonate with a hammer and it will not.</p>
<p dir="auto"><img src="http://i1117.photobucket.com/albums/k587/Syph007/Lexan/IMG_1898.jpg" alt="" class="img-markdown  img-fluid" /></p>
</blockquote>
<p dir="auto">That's interesting. I didn't know there were any other clear saks.</p>
]]></description><link>https://forum.multitool.org/post/822466</link><guid isPermaLink="true">https://forum.multitool.org/post/822466</guid><dc:creator><![CDATA[Nhoj]]></dc:creator><pubDate>Thu, 02 Jan 2014 04:51:31 GMT</pubDate></item><item><title><![CDATA[Reply to Making a transparent SAK on Thu, 02 Jan 2014 04:25:59 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/tosh" aria-label="Profile: tosh">@<bdi>tosh</bdi></a> <a href="/post/822074">said</a>:<br />
I'm surprised the plexiglass withstands the stress/tension. I would never have thought it could.</p>
</blockquote>
<p dir="auto">I was thinking the same  <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /> cuz Syph007 did something similar in this thread: <a href="http://forum.multitool.org/the-mod-squad/playing-with-polycarbonate-today/msg565953/#msg565953" rel="nofollow ugc">Playing with polycarbonate</a></p>
<p dir="auto">And he said Plexi will crack very easy, but you can literally beat Polycarbonate with a hammer and it will not.</p>
<p dir="auto"><img src="http://i1117.photobucket.com/albums/k587/Syph007/Lexan/IMG_1898.jpg" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://forum.multitool.org/post/822464</link><guid isPermaLink="true">https://forum.multitool.org/post/822464</guid><dc:creator><![CDATA[Ombudsman]]></dc:creator><pubDate>Thu, 02 Jan 2014 04:25:59 GMT</pubDate></item><item><title><![CDATA[Reply to Making a transparent SAK on Wed, 01 Jan 2014 17:38:14 GMT]]></title><description><![CDATA[<p dir="auto">Thank you everyone. I'll try and take some better photos with my phone today. :)</p>
]]></description><link>https://forum.multitool.org/post/822190</link><guid isPermaLink="true">https://forum.multitool.org/post/822190</guid><dc:creator><![CDATA[Nhoj]]></dc:creator><pubDate>Wed, 01 Jan 2014 17:38:14 GMT</pubDate></item><item><title><![CDATA[Reply to Making a transparent SAK on Wed, 01 Jan 2014 14:35:18 GMT]]></title><description><![CDATA[<p dir="auto">What a great idea!  And very nice finished product. <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://forum.multitool.org/post/822138</link><guid isPermaLink="true">https://forum.multitool.org/post/822138</guid><dc:creator><![CDATA[Mr. Whippy]]></dc:creator><pubDate>Wed, 01 Jan 2014 14:35:18 GMT</pubDate></item><item><title><![CDATA[Reply to Making a transparent SAK on Wed, 01 Jan 2014 13:38:52 GMT]]></title><description><![CDATA[<p dir="auto">Very cool work and good pictorial on the process. <img src="/assets/uploads/smileys/hatsoff.gif" alt=":hatsoff:" title="Hats Off" class="forum-smiley emoji" /></p>
<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/nhoj" aria-label="Profile: Nhoj">@<bdi>Nhoj</bdi></a> <a href="/post/822044">said</a>:<br />
Here was the inspiration: &lt;/topic/32514<br />
It's post #7.</p>
</blockquote>
<p dir="auto">Yeah, the first thing I thought of when I read the thread title was "Energie". :D</p>
<p dir="auto"><a href="http://forum.multitool.org/general-tool-discussion/the-'i'm-a-show-off'-thread/msg535074/#msg535074" rel="nofollow ugc">HERE</a> is a direct link to his post. He did lots of cool stuff.</p>
]]></description><link>https://forum.multitool.org/post/822129</link><guid isPermaLink="true">https://forum.multitool.org/post/822129</guid><dc:creator><![CDATA[enki_ck]]></dc:creator><pubDate>Wed, 01 Jan 2014 13:38:52 GMT</pubDate></item><item><title><![CDATA[Reply to Making a transparent SAK on Wed, 01 Jan 2014 11:43:39 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/zed" aria-label="Profile: Zed">@<bdi>Zed</bdi></a> <a href="/post/822076">said</a>:<br />
Very nice  <img src="/assets/uploads/smileys/drool.gif" alt=":drool:" title="drool" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">...what he said!</p>
]]></description><link>https://forum.multitool.org/post/822099</link><guid isPermaLink="true">https://forum.multitool.org/post/822099</guid><dc:creator><![CDATA[lowtech]]></dc:creator><pubDate>Wed, 01 Jan 2014 11:43:39 GMT</pubDate></item><item><title><![CDATA[Reply to Making a transparent SAK on Wed, 01 Jan 2014 10:06:42 GMT]]></title><description><![CDATA[<p dir="auto">Very nice  <img src="/assets/uploads/smileys/drool.gif" alt=":drool:" title="drool" class="forum-smiley emoji" /></p>
]]></description><link>https://forum.multitool.org/post/822076</link><guid isPermaLink="true">https://forum.multitool.org/post/822076</guid><dc:creator><![CDATA[Zed]]></dc:creator><pubDate>Wed, 01 Jan 2014 10:06:42 GMT</pubDate></item><item><title><![CDATA[Reply to Making a transparent SAK on Wed, 01 Jan 2014 09:56:49 GMT]]></title><description><![CDATA[<p dir="auto">I'll echo everyone's comments here!</p>
<p dir="auto">Superb Nhoj  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
<p dir="auto">I'm surprised the plexiglass withstands the stress/tension. I would never have thought it could.</p>
<p dir="auto">Excellent!!<br />
<img src="/assets/uploads/smileys/hatsoff.gif" alt=":hatsoff:" title="Hats Off" class="forum-smiley emoji" /></p>
]]></description><link>https://forum.multitool.org/post/822074</link><guid isPermaLink="true">https://forum.multitool.org/post/822074</guid><dc:creator><![CDATA[tosh]]></dc:creator><pubDate>Wed, 01 Jan 2014 09:56:49 GMT</pubDate></item><item><title><![CDATA[Reply to Making a transparent SAK on Wed, 01 Jan 2014 09:30:22 GMT]]></title><description><![CDATA[<p dir="auto">Very nice - I like all those see-trough things where you can see the inside of stuff trough the transparent cases. Great to see it done on a SAK!</p>
]]></description><link>https://forum.multitool.org/post/822073</link><guid isPermaLink="true">https://forum.multitool.org/post/822073</guid><dc:creator><![CDATA[microbe]]></dc:creator><pubDate>Wed, 01 Jan 2014 09:30:22 GMT</pubDate></item></channel></rss>