Breathing new life into 70 year old basket cases
-
I have taken on a mod job firing some new custom wooden scales to a model1908 soldier with mint steel but ratty scales and a smaller knife of similar constriction. The owner has sent me some "basket case" knives to practice on as I have not worked on these old knives before other than patching up the scales on my 40 Wenger.
I thought some of you might like to follow along as I tear down and rebuild some of these old veteran soldiers.
First a roll call pic of the candidates.<a href="http://s1309.photobucket.com/user/Peter_Thorpe/media/IMG_0895_zps34e88de6.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1309.photobucket.com/albums/s640/Peter_Thorpe/IMG_0895_zps34e88de6.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
:o

-
Nice one for making a thread out of this. Can't wait to see the progression, and well done for taking it on.

-
This thread should be marked X-rated...

-
There was one 41 knife not in the above pic.
it was the worst of the bunch with one scale completely missing, a blade that had been butchered on a grinder and rusty gummed up tools. It was so bad I didn't even take a before photo as I thought it would only be useful to see how these are put together and for parts.After tearing it down I had second thoughts. Perhaps we could make something out of this after all. The gouges on the blade were quite bad but the shape of the blade was still there. After some work with wet and dry paper most of the damage was removed even if the deepest marks were still evident. All the rusty parts got a bath in hydrochloric acid and a date with the polishing wheel. No, they don't look new. But even the blade is acceptable for a "user".
At work we use scrapers made of real MicartaTM. Phenolic resin and paper. I decided to try some as scale material. Looks good so far. Shapes easily, tales a nice finish and with its brown colour it looks appropriate for the age of the knife.
I have some 1/8 silver steel rod which is a good fit for the pivot pins ans some 2.2mm for the spring middle pin and scale rivet.With the strength of the backsprings on these old knives, I was surprised at the ease of reassembly.
To cut a long story short... here are some"after" pics.<a href="http://s1309.photobucket.com/user/Peter_Thorpe/media/IMG_0897_zpsab343891.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1309.photobucket.com/albums/s640/Peter_Thorpe/IMG_0897_zpsab343891.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s1309.photobucket.com/user/Peter_Thorpe/media/IMG_0898_zpscc7fd853.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1309.photobucket.com/albums/s640/Peter_Thorpe/IMG_0898_zpscc7fd853.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s1309.photobucket.com/user/Peter_Thorpe/media/IMG_0900_zpsa09df10b.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1309.photobucket.com/albums/s640/Peter_Thorpe/IMG_0900_zpsa09df10b.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Sure the blade is still a bit skanky, but I'd happily carry this old fella. I hope some of the others improve to the same extent.
-
-
Nice resto job there mate! Always nice to see some old soldiers getting some TLC

Sent from the astropathic choir.
-
The Micarta goes well with the old look of the knife !
-
Great looking scales really fine work around the awl.
Oh and a spectacular job on the front pin in the bolster ....
I think this may become my favourite thread ever :)
-
Id love to restore one of the old ones like that. Ive never even seen what the old springs look like. Did you happen to take pics of it disassembled?
-
@jaydar said:
Great looking scales really fine work around the awl.Oh and a spectacular job on the front pin in the bolster ....
I think this may become my favourite thread ever :)
ah.. wait until I get into some of the others, this first one was just a bit of a play around. ;)
@Syph007 said:
Id love to restore one of the old ones like that. Ive never even seen what the old springs look like. Did you happen to take pics of it disassembled?Didn't take any pics of this one, as I said I expected it to be little more than useful for parts. One of the others has a broken spring and I was hoping to salvage that.
Promise to take step-by-step pics of the next ones.
-
Okay, with this one I'm going to try an experiment. I want to find out if I can add wooden scales to a knife without breaking it down. I think this would be the way to go with the "mod job" knives if it works out because two of them are in pristine condition apart from the scales and it would be a shame to disturb the wonderful Swiss precision assembly unnecessarily.
So, this 1943 Elsener Schwyz has quite reasonable steel but broken up scales.
As promised we will start with a "before" shot and I will add progress pics along the way.


As you can see, only some very light scratching and minor rust.
I'll be using wood for scale material this time and as yet have not decided which.
Seeing it's an experiment, probably not something too exotic, and something I have a decent quantity of. But something a bit nice. Hmmm, probably should sleep on it and have a look in my wood box tomorrow. Take some blocks to work tomorrow evening and slice a few blanks off with the bandsaw... Snakewood? Brown Mallee burl? or there's that piece of Red Gum... keep guessing. -
Oh, and a slight derail of my own thread.
Another job I have on at the moment is building one nice 84mm SAK from several donor knives. Blade from this, Awl and Openers from that, Corkscrew from the other, Scissors from over there and Small Blade from somewhere else again.
As you can imagine, break down 4 or 5 SAKs but only pick out parts to build one from the pile and you have a LOT of leftovers.
Search through that pile and pick out the "next best" of everything and it's surprising what you can put together.


Bear in mind that so far in this thread all the work has been on knives and parts saved from the junk pile and you can imagine what will be coming down the pipeline once I start working on the good stuff, I can't wait to see it all myself.
-
The Lazarus knife.LOL.
The micarta that you've selected works really well.
Great work and thanks for posting.
-

This will be fun to see......
-
This will be fun to see......
+1
Sent from a device made from star dust using tapatalk
-
Nice one PTR
Looking forward to this :D - I love your work ;)
Guess you will be thinking through your plans for the Three Face Wenger restoration project and one other very carefully given another recent post/thread on the forum ??? :-\
-
Peter how thick are the springs on those old boys, they look MASSIVE.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


