High Tensile Wire Cutting Test, Warning: Minor Tool Abuse
-
While helping clean up a classroom this morning I took some pics for the surge challenge.
<a href="https://flic.kr/p/BmMcz7" target="_blank" rel="noopener noreferrer"><img src="https://farm6.staticflickr.com/5810/23207635764_3b3ff18d7a_b.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="https://flic.kr/p/BS9UQo" target="_blank" rel="noopener noreferrer"><img src="https://farm6.staticflickr.com/5706/23540050310_091caaedae_b.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="https://flic.kr/p/BmMc4h" target="_blank" rel="noopener noreferrer"><img src="https://farm6.staticflickr.com/5673/23207634034_8fbd62f97a_b.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="https://flic.kr/p/CgYJ1u" target="_blank" rel="noopener noreferrer"><img src="https://farm6.staticflickr.com/5690/23809658676_8d3d6c2da0_b.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="https://flic.kr/p/BmU2rB" target="_blank" rel="noopener noreferrer"><img src="https://farm1.staticflickr.com/574/23208967473_f64b699f19_b.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
HT wire is very hard to cut and is at what I consider to be the limit for my hand strength with the surge.
So I took some home to see if how my new blacktip would compare.
First I tried some budget compound pliers. Ten plus cuts, no cutter damage, no sore hand.
<a href="https://flic.kr/p/BKLHwR" target="_blank" rel="noopener noreferrer"><img src="https://farm1.staticflickr.com/633/23467820849_d3f22c18f7_b.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
Now onto the new blacktip.
I cut it twice, in the hard wire notch and then in the middle of the wire cutters.
That didn't go too well. Cutters lock up and will need tidying. Slightly less effort required than the surge.
<a href="https://flic.kr/p/CbZJFa" target="_blank" rel="noopener noreferrer"><img src="https://farm6.staticflickr.com/5717/23753273551_f48a508342_b.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="https://flic.kr/p/CgYGDm" target="_blank" rel="noopener noreferrer"><img src="https://farm6.staticflickr.com/5736/23809654086_d99b032919_b.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
I tried the surge again in the middle of the wire cutters and they deformed just enough to lightly catch.
<a href="https://flic.kr/p/C9GVW3" target="_blank" rel="noopener noreferrer"><img src="https://farm1.staticflickr.com/695/23727361522_7a93078532_b.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
I recently sold my backup Gerber so I wasn't brave enough to try these. Yet. I might feel up to it later.
<a href="https://flic.kr/p/BmM9Ds" target="_blank" rel="noopener noreferrer"><img src="https://farm1.staticflickr.com/661/23207625924_6f55ba3ff7_b.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
It is good to see where the limit is, and I think you found it.
-
Real men cut rivets 8)

:D
-
...and it is good to remember how much better proper tools work, compared to multi tools.
I have some cheap wire cutters and several pliers that will outcut my multi tools costing 20 times more all day long -
....and why would a lobster need pliers ???
-
@zoidberg said:
Now onto the new blacktip.I cut it twice, in the hard wire notch and then in the middle of the wire cutters.
That didn't go too well. Cutters lock up and will need tidying. Slightly less effort required than the surge.
<a href="https://flic.kr/p/CbZJFa" target="_blank" rel="noopener noreferrer"><img src="https://farm6.staticflickr.com/5717/23753273551_f48a508342_b.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="https://flic.kr/p/CgYGDm" target="_blank" rel="noopener noreferrer"><img src="https://farm6.staticflickr.com/5736/23809654086_d99b032919_b.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
smurfed up the blacktip already?

I did the same thing with my other black tip the same result. -
That's why you can't have nice things. ::)
:P
:D
-
@powernoodle said:
It is good to see where the limit is, and I think you found it.Yeah, I would rather have an idea of them before an emergency than to find out during one.
-
That's the reason I carry a pair of Klein Iron Workers pliers in the truck and saddlebags. Spring return and tough enough to eat barb wire and nails. Multis of any flavor are a poor substitute....

Sent from 9 miles from the face of the sun
-

try compressionless bike outer cables for a test... i doubt any multitool cutter will survive that...
-
@zoidberg said:
I recently sold my backup Gerber so I wasn't brave enough to try these. Yet. I might feel up to it later.Be prepared that you may need to replace the replaceable Gerber cutters. IIRC they are very hard and very brittle, so they do well on cutting large quantities of softer wire (which is what they were designed for), but tend to break on hard wire.
If I had to use an MT to cut large(ish) diameter hard wire I'd consider filing a notch first to reduce the chance of smurfing up the cutters. Or even just file a couple of notches and then bend the wire back and forth until it breaks at the weak point you have created. There is often "more than one way to skin a cat" if you use your imagination and think laterally.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login