<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[Do most knives need points?]]></title><description><![CDATA[<p dir="auto">After carrying a square ended coping blade knife for two weeks, I asked myself: do most knives need points?</p>
<p dir="auto">I literally cut EVERYTHING with my square ender that I used to cut with my pointed knives.</p>
<p dir="auto">EV. ERY. THING.</p>
<p dir="auto">The only thing I cannot do with my square ender is quickly stab some thing, or some one else, but mercifully I have not needed to do that the last few weeks.</p>
<p dir="auto">And if I did need to self-defend, instead of run like hell, I reckon a slashing stroke might actually do more to disable the arm, leg, eyes, or neck of an opponent than a stab, but I’m no expert.</p>
<p dir="auto">Let me concede that for a fighting knife a point makes sense, since the more ways a knife has to disable an opponent the better. Heck, having a Glock welded to a fighting knife might be a swell added advantage.</p>
<p dir="auto">I can also see a point on a game cleaning knife. Ya gotta start the skinning somewhere, after all.</p>
<p dir="auto">But for EDC and most food prep, and work knives, what is the point of a point?</p>
<p dir="auto">Every puncture cut I make in EDC, kitchen food processing, and work knife usage I can make more easily and effectively with a slash/draw motion.</p>
<p dir="auto">And every knife-phile says solemnly, “Never use your knife, especially the point, as a pry bar!</p>
<p dir="auto">So why the hell are the vast majority of non fighting and skinning knives pointed?</p>
<p dir="auto">Is this some kind of vestigial absurdity found  in both traditional patterns AND modern flippers?</p>
<p dir="auto">I fear so.</p>
<p dir="auto">It seems to come down to aesthetics and fear of attack even in some countries that license concealed carry of handguns.</p>
<p dir="auto">Go figure.</p>
<p dir="auto">The human eye seems to appreciate a pointy knife more than a square one.</p>
<p dir="auto">Go figure, again.</p>
<p dir="auto">And for those that say oh, but I need my point to work my blade edge  in under this or that thing before cutting, I say, well, I just spent two weeks doing that easily with my square ender.</p>
<p dir="auto">(Note: don’t call it a cleaver. It’s a coping blade.)</p>
<p dir="auto">Because I am now a recently half recovering orthodox pointy knife aficionado, I want everyone to know I still have pointy knife yearnings. I prefer the way they look. I know how you feel.</p>
<p dir="auto">And I have the little voice on my shoulder whispering, “You need your pointy knife in case you are surprise attacked  by and have to stab a mountain lion, or a bad guy...if you are lucky enough to survive the surprise.”</p>
<p dir="auto">But the other voice on the other shoulder is saying, “Forget those pointy knives, pal. They squander the cutting power of a third or a quarter of a blade by curving away from whatever you are cutting. All for a little rocking cut flexibility and maybe a stab when you can’t avoid a combat zone. Otherwise, a little flat and a little belly is just turning a 3.5 inch archetypal blade myth into a 2.75 inch cutting tool.”</p>
<p dir="auto">But I need my point fix BAD sometimes, I say out loud to myself.</p>
<p dir="auto">I need the aesthetics of curvature out to a breakable, bendable point, and feel a certain wire mother attraction to a stabby point, even though street fight probability is an extreme right tail event that a fire arm makes more sense as preparation for.</p>
<p dir="auto">Obviously I am deeply conflicted, as are others. And as are knife makers.</p>
<p dir="auto">Business men that normally like efficiency in production (the cheap smurfs will substitute nylon washers for phosphor bronze to save a few pennies!) are going to the trouble of grinding off a whole bunch of freaking blade stock to points that are neither necessary, nor even optimally  functional in non fighting and non game cleaning knives.</p>
<p dir="auto">Think how much farther blade stock could go if every pointy blade were shortened to the spot where the belly begins, or all that machining off to a point were skipped and you got a real 3.5 inch straight edge to drag across the thing to be cut.</p>
<p dir="auto">As my eye prefers a point, while my head knows the point is arguably an ornamental underutilization in 99 percent of knife usage, I seek more experience to escape the tug of war between my eye and mind. Also, I would like to hear from others about point vs no point.</p>
<p dir="auto">So: I have decided to EDC a contempo flipper knife with a broken off point I found in a thrift store for an over priced buck and change.I will carry it  for a few weeks and test if I miss the point of a typical budget flipper. It is a humble, absurdly tactical and machine funk looking  Magnum by Boker that started life as somewhere around a 3.5 inch blade before some kind of abuse/misuse made it suddenly a legal knife in 3” jurisdictions. It is the knife pictured. I will sharpen it on a DMT Steel a bit and report back in a week, or so, whether or not the missing point significantly hampered my cutting needs with a 440 mystery steel flipper moderne.</p>
<p dir="auto">Kirk out.</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/511447_6DD39369-3D66-449B-8F78-381A9BCA47E6.jpeg" alt="6DD39369-3D66-449B-8F78-381A9BCA47E6.jpeg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://forum.multitool.org/topic/87386/do-most-knives-need-points</link><generator>RSS for Node</generator><lastBuildDate>Fri, 20 Nov 2026 10:08:10 GMT</lastBuildDate><atom:link href="https://forum.multitool.org/topic/87386.rss" rel="self" type="application/rss+xml"/><pubDate>Sun, 16 May 2021 19:22:14 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to Do most knives need points? on Tue, 06 Jul 2021 03:55:52 GMT]]></title><description><![CDATA[<p dir="auto">Opened some new hairbrushes today for my wife and daughter.  The hairbrushes were zip-tied into the package.  The clip point blade of a Buck 301 stockman made short work of the zip ties.</p>
<p dir="auto">Could this task have been accomplished with a blade that didn’t have a point?  Perhaps, but having an acutely pointed blade that slipped easily into the small gaps between the zip ties and the hair brushes made the job easy.</p>
]]></description><link>https://forum.multitool.org/post/2260496</link><guid isPermaLink="true">https://forum.multitool.org/post/2260496</guid><dc:creator><![CDATA[nate j]]></dc:creator><pubDate>Tue, 06 Jul 2021 03:55:52 GMT</pubDate></item><item><title><![CDATA[Reply to Do most knives need points? on Fri, 04 Jun 2021 04:49:43 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/pomsbz" aria-label="Profile: pomsbz">@<bdi>pomsbz</bdi></a> <a href="/post/2250829">said</a>:<br />
I sold it a long time ago. The wood (old barn oak) was untreated from the factory and so soft a fingernail could mark it. After 6 months it was a wreck. I restored it to new condition by sanding out all the marks then stabilizing the wood with a mixture of linseed and tung oils to harden it but I hate having to do that kind of thing. If I wanted a hobby project I'd have bought one, this was supposed to be a knife off the shelf. I also missed having a point and I kept rounding off the 'tip' which on a knife like this does almost all the work when cutting on a flat surface. Having a spear/clip blade means that there is belly and more of the actual blade is working into the cut on a flat surface (food/hobby, etc).</p>
<p dir="auto">In any case the knife was a 2.8" ish blade. Wouldn't have suited your uses. I'm the kind of person who uses the small blade on their SAK far more often than the main blade.</p>
</blockquote>
<p dir="auto">Yup, u were in knife hell for sure at 2.8 square end easy open. It was Jack of none and master of none.</p>
<p dir="auto">I really like the soft wood handle on mine. It is crucial to controlled cutting for me. It helps my hand feel what is happening. Dont mind the dents. Mine is even missing a chunk and I like it even better. It’s a familiar landmark in my palm. I know where is am on the handle. No sharp edges on the handle. Everything I like about it was wrong for you. That’s part of what fascinates me so much about knives and users.</p>
]]></description><link>https://forum.multitool.org/post/2251206</link><guid isPermaLink="true">https://forum.multitool.org/post/2251206</guid><dc:creator><![CDATA[SgtTowser]]></dc:creator><pubDate>Fri, 04 Jun 2021 04:49:43 GMT</pubDate></item><item><title><![CDATA[Reply to Do most knives need points? on Thu, 03 Jun 2021 04:41:49 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/sgttowser" aria-label="Profile: SgtTowser">@<bdi>SgtTowser</bdi></a> <a href="/post/2250766">said</a>:<br />
How much do u want for your NAVY KNIFE? 😀</p>
<p dir="auto">Just kidding.</p>
<p dir="auto">Thanks so much for responding. Your sound reasoning will help a lot of persons.</p>
<p dir="auto">I wish I were one. 🤪</p>
<p dir="auto">Is it a 3.5” or a 3” blade? I have a an original 3.5” WWII version in roughly ground condition that I nevertheless love and that in part inspired the thread.</p>
<p dir="auto">For what it’s worth, I tried a 3” post war rope knife in good condition and did not carry it more than one day before deciding it completely missed the mark. The extra half inch of cutting edge makes a huge difference in use.</p>
<p dir="auto">I tried a non swayback and it too completely misses the mark.</p>
<p dir="auto">I like Ken Onion knives and he did a contempo swayback, but the blade is not a square end. Wrong!</p>
<p dir="auto">Serge Pachenko recently got a lot right  with his clever collection, but they are way short on cutting edge.</p>
<p dir="auto">Custom knife makers make some, or would, but their prices are only good for them, not for me. I don’t doubt they put even more time into their fine knives than they bill for. I’m just not their target market.</p>
<p dir="auto">There are a million cleaver flippers and thumb stud razors, but they are mostly not sway backed, or too short, or to thin at the spine.</p>
<p dir="auto">And when I saw even my current designer gold standard—Marcin Slyzs—go Wharnie on his otherwise exceptional swayback for Spyderco, I went into a knife equivalent of Quarantine Stress Disorder and began to stay in bed—manifesting signs of knife market stress trauma.</p>
<p dir="auto">Artisan Blades teased me with a 4 inch coping blade (thick spine, concave grind in good steel) that they IMHO mistakenly called a cleaver, but then they attached it to a pointless tactical handle instead of a swayback.</p>
<p dir="auto">Few seem to get a coping blade works best with a swayback back unless you want to use your coping blade as a meat cleaver and doa lot of round house pounding cuts on a rack of lamb.</p>
<p dir="auto">Few seem to get that a thick spine and a concave grind are great for heavy duty drag slicing. If I want to julienne some vegetables, I will get get a Robert Herder high carbon paring knife, not a cleaver or a razor.</p>
<p dir="auto">You see, I am in a swayback 3.5” coping blade desert.</p>
<p dir="auto">But like Paul Newman in Hombre, I have no choice but to cross the desert to escape the gaggle of silly folding meat cleavers in my wake. And I can cut it.</p>
<p dir="auto">Well, maybe.</p>
<p dir="auto">But now the good news...</p>
<p dir="auto">Either way, you know what you like and you found a spear point that works for you, and that’s all that matters.</p>
<p dir="auto">I used to carry Champion and then Swiss Champ  in SAKs “sort of” satisfied,  til I got my Cybertool L and now my yearnings for another SAK are over. Period. Even if they come out with something better (and they will), I don’t need anything better. Well, if they add an integral ratchet and some cool way of carrying more driver heads, I might consider it. 😂</p>
<p dir="auto">It happens. A person finds the right knife for himself. He may have some affairs with other knives, or he may have a permanent knife mistress, or he may practice cutlery polygamy. But blessed are those that find their perfect match. Cybertool L is mine in SAKs.</p>
<p dir="auto">So: Now I am questing after the right square end swayback with a 3.5 inch long blade with coping blade spine like my Coast Guard Camillus. I see old Cammies now all the time on E-Bog, but so far there is always something lacking, too much blade play, cracked wood, too many scratches, silly pricing, or silly competition, etc.</p>
<p dir="auto">And a part of me hopes for a great contemporary expression of this old style of knife.</p>
<p dir="auto">I ain’t no hard core primitive. Just a discerning old coot.</p>
<p dir="auto">Still nothing else will do. A swayback with 3.5” square end in good condition—not needing mint. Brass liners. Ideally I would like it to be one handed with a Walker lock.</p>
<p dir="auto">Spear points are my favorite looking blade profile right now, so I can empathize with you a bit, but my Cybertool L has the point probe thing covered six ways from Sunday on not one but two blades and an awl and a cork screw. Since I’m already covered on point probe: I think to myself— if I only want to look at a knife, I would just buy a picture of a spear point by Ray Laconico, probably, and frame it.</p>
<p dir="auto">But I want a swayback square end user to complement my CTL.</p>
<p dir="auto">A barehead or teardrop easy open just will not do.</p>
<p dir="auto">We make our own hells and must live in them with dignity until we can resolve them.</p>
<p dir="auto">Very tough to find a swayback with a coping blade at 3.5” at a right price; that’s the gist of it.</p>
</blockquote>
<p dir="auto">I sold it a long time ago. The wood (old barn oak) was untreated from the factory and so soft a fingernail could mark it. After 6 months it was a wreck. I restored it to new condition by sanding out all the marks then stabilizing the wood with a mixture of linseed and tung oils to harden it but I hate having to do that kind of thing. If I wanted a hobby project I'd have bought one, this was supposed to be a knife off the shelf. I also missed having a point and I kept rounding off the 'tip' which on a knife like this does almost all the work when cutting on a flat surface. Having a spear/clip blade means that there is belly and more of the actual blade is working into the cut on a flat surface (food/hobby, etc).</p>
<p dir="auto">In any case the knife was a 2.8" ish blade. Wouldn't have suited your uses. I'm the kind of person who uses the small blade on their SAK far more often than the main blade.</p>
]]></description><link>https://forum.multitool.org/post/2250829</link><guid isPermaLink="true">https://forum.multitool.org/post/2250829</guid><dc:creator><![CDATA[pomsbz]]></dc:creator><pubDate>Thu, 03 Jun 2021 04:41:49 GMT</pubDate></item><item><title><![CDATA[Reply to Do most knives need points? on Wed, 02 Jun 2021 21:51:10 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/pomsbz" aria-label="Profile: pomsbz">@<bdi>pomsbz</bdi></a> <a href="/post/2250664">said</a>:<br />
I carried this Navy Knife for 6 months as my EDC. I went back to a point, specifically a spear point blade. I prefer it. You can use the tip of the sheepsfoot to pierce but it's not as comfortable an angle and I can use the tip of the spear to tease stuff open in a way which I can't with the flat point. I used to enjoy clip blades but more for the look than the need for the thinner tip.</p>
<p dir="auto"><img src="http://www.timelessjewishart.com/EDC_zx/NK_4.jpg" alt="" class="img-markdown  img-fluid" /></p>
</blockquote>
<p dir="auto">How much do u want for your NAVY KNIFE? 😀</p>
<p dir="auto">Just kidding.</p>
<p dir="auto">Thanks so much for responding. Your sound reasoning will help a lot of persons.</p>
<p dir="auto">I wish I were one. 🤪</p>
<p dir="auto">Is it a 3.5” or a 3” blade? I have a an original 3.5” WWII version in roughly ground condition that I nevertheless love and that in part inspired the thread.</p>
<p dir="auto">For what it’s worth, I tried a 3” post war rope knife in good condition and did not carry it more than one day before deciding it completely missed the mark. The extra half inch of cutting edge makes a huge difference in use.</p>
<p dir="auto">I tried a non swayback and it too completely misses the mark.</p>
<p dir="auto">I like Ken Onion knives and he did a contempo swayback, but the blade is not a square end. Wrong!</p>
<p dir="auto">Serge Pachenko recently got a lot right  with his clever collection, but they are way short on cutting edge.</p>
<p dir="auto">Custom knife makers make some, or would, but their prices are only good for them, not for me. I don’t doubt they put even more time into their fine knives than they bill for. I’m just not their target market.</p>
<p dir="auto">There are a million cleaver flippers and thumb stud razors, but they are mostly not sway backed, or too short, or to thin at the spine.</p>
<p dir="auto">And when I saw even my current designer gold standard—Marcin Slyzs—go Wharnie on his otherwise exceptional swayback for Spyderco, I went into a knife equivalent of Quarantine Stress Disorder and began to stay in bed—manifesting signs of knife market stress trauma.</p>
<p dir="auto">Artisan Blades teased me with a 4 inch coping blade (thick spine, concave grind in good steel) that they IMHO mistakenly called a cleaver, but then they attached it to a pointless tactical handle instead of a swayback.</p>
<p dir="auto">Few seem to get a coping blade works best with a swayback back unless you want to use your coping blade as a meat cleaver and doa lot of round house pounding cuts on a rack of lamb.</p>
<p dir="auto">Few seem to get that a thick spine and a concave grind are great for heavy duty drag slicing. If I want to julienne some vegetables, I will get get a Robert Herder high carbon paring knife, not a cleaver or a razor.</p>
<p dir="auto">You see, I am in a swayback 3.5” coping blade desert.</p>
<p dir="auto">But like Paul Newman in Hombre, I have no choice but to cross the desert to escape the gaggle of silly folding meat cleavers in my wake. And I can cut it.</p>
<p dir="auto">Well, maybe.</p>
<p dir="auto">But now the good news...</p>
<p dir="auto">Either way, you know what you like and you found a spear point that works for you, and that’s all that matters.</p>
<p dir="auto">I used to carry Champion and then Swiss Champ  in SAKs “sort of” satisfied,  til I got my Cybertool L and now my yearnings for another SAK are over. Period. Even if they come out with something better (and they will), I don’t need anything better. Well, if they add an integral ratchet and some cool way of carrying more driver heads, I might consider it. 😂</p>
<p dir="auto">It happens. A person finds the right knife for himself. He may have some affairs with other knives, or he may have a permanent knife mistress, or he may practice cutlery polygamy. But blessed are those that find their perfect match. Cybertool L is mine in SAKs.</p>
<p dir="auto">So: Now I am questing after the right square end swayback with a 3.5 inch long blade with coping blade spine like my Coast Guard Camillus. I see old Cammies now all the time on E-Bog, but so far there is always something lacking, too much blade play, cracked wood, too many scratches, silly pricing, or silly competition, etc.</p>
<p dir="auto">And a part of me hopes for a great contemporary expression of this old style of knife.</p>
<p dir="auto">I ain’t no hard core primitive. Just a discerning old coot.</p>
<p dir="auto">Still nothing else will do. A swayback with 3.5” square end in good condition—not needing mint. Brass liners. Ideally I would like it to be one handed with a Walker lock.</p>
<p dir="auto">Spear points are my favorite looking blade profile right now, so I can empathize with you a bit, but my Cybertool L has the point probe thing covered six ways from Sunday on not one but two blades and an awl and a cork screw. Since I’m already covered on point probe: I think to myself— if I only want to look at a knife, I would just buy a picture of a spear point by Ray Laconico, probably, and frame it.</p>
<p dir="auto">But I want a swayback square end user to complement my CTL.</p>
<p dir="auto">A barehead or teardrop easy open just will not do.</p>
<p dir="auto">We make our own hells and must live in them with dignity until we can resolve them.</p>
<p dir="auto">Very tough to find a swayback with a coping blade at 3.5” at a right price; that’s the gist of it.</p>
]]></description><link>https://forum.multitool.org/post/2250766</link><guid isPermaLink="true">https://forum.multitool.org/post/2250766</guid><dc:creator><![CDATA[SgtTowser]]></dc:creator><pubDate>Wed, 02 Jun 2021 21:51:10 GMT</pubDate></item><item><title><![CDATA[Reply to Do most knives need points? on Wed, 02 Jun 2021 16:29:12 GMT]]></title><description><![CDATA[<p dir="auto">I carried this Navy Knife for 6 months as my EDC. I went back to a point, specifically a spear point blade. I prefer it. You can use the tip of the sheepsfoot to pierce but it's not as comfortable an angle and I can use the tip of the spear to tease stuff open in a way which I can't with the flat point. I used to enjoy clip blades but more for the look than the need for the thinner tip.</p>
<p dir="auto"><img src="http://www.timelessjewishart.com/EDC_zx/NK_4.jpg" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://forum.multitool.org/post/2250664</link><guid isPermaLink="true">https://forum.multitool.org/post/2250664</guid><dc:creator><![CDATA[pomsbz]]></dc:creator><pubDate>Wed, 02 Jun 2021 16:29:12 GMT</pubDate></item><item><title><![CDATA[Reply to Do most knives need points? on Wed, 02 Jun 2021 15:14:05 GMT]]></title><description><![CDATA[<p dir="auto">Here is another factoid that makes me wonder if knives with points are relevant to EDC.</p>
<p dir="auto">Despite not needing a pointed knife, I wanted a Sinkievich design and found a new Kershaw Atmos for next to nothing, as it circles the drain of discontinuance. I found no Sinks with square ends.</p>
<p dir="auto">I opened the Kershaw box and for some strange reason skimmed the factory directions and disclaimer boiler plate.</p>
<p dir="auto">It indicates that Kershaw folding knives are specifically designed NOT to be stabbed with, or pried with. By inference, I reckon they must not be designed to fight with. Kershaw says they are designed to be cutting tools only.</p>
<p dir="auto">So: whether or not this were legalese to esculpate them from lawsuits, they nevertheless explicit state that their knives are not designed to tolerate the kinetic forces of puncturing and prying.</p>
<p dir="auto">So: why are they putting points on their knives at all?</p>
<p dir="auto">Possible Answer: mostly ornamental style, maybe?</p>
<p dir="auto">If I stab my box of cereal to start my cut to open the top, it appears I would be using my nice new Sinkievich Atmos outside its design envelope. It was not designed to puncture...just cut.</p>
<p dir="auto">And it is VERY SLICEY.</p>
<p dir="auto">But who needs a point for Slicey?</p>
<p dir="auto">Ornamental tail fins lasted a very short time on cars.</p>
<p dir="auto">Pointed Knive have been the prevalent form factor since cave person days.</p>
<p dir="auto">Hmmmm.</p>
]]></description><link>https://forum.multitool.org/post/2250637</link><guid isPermaLink="true">https://forum.multitool.org/post/2250637</guid><dc:creator><![CDATA[SgtTowser]]></dc:creator><pubDate>Wed, 02 Jun 2021 15:14:05 GMT</pubDate></item><item><title><![CDATA[Reply to Do most knives need points? on Sun, 30 May 2021 03:44:01 GMT]]></title><description><![CDATA[<p dir="auto">Ray.   <img src="/assets/uploads/smileys/hatsoff.gif" alt=":hatsoff:" title="Hats Off" class="forum-smiley emoji" /></p>
<p dir="auto">As always the depth of your collection is such a treat.  Thank you for sharing pics and information.</p>
]]></description><link>https://forum.multitool.org/post/2249461</link><guid isPermaLink="true">https://forum.multitool.org/post/2249461</guid><dc:creator><![CDATA[Aloha]]></dc:creator><pubDate>Sun, 30 May 2021 03:44:01 GMT</pubDate></item><item><title><![CDATA[Reply to Do most knives need points? on Sun, 30 May 2021 03:41:40 GMT]]></title><description><![CDATA[<p dir="auto">That's a cool one Ray ! <img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /></p>
]]></description><link>https://forum.multitool.org/post/2249459</link><guid isPermaLink="true">https://forum.multitool.org/post/2249459</guid><dc:creator><![CDATA[SteveC]]></dc:creator><pubDate>Sun, 30 May 2021 03:41:40 GMT</pubDate></item><item><title><![CDATA[Reply to Do most knives need points? on Sun, 30 May 2021 01:51:15 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/sgttowser" aria-label="Profile: SgtTowser">@<bdi>SgtTowser</bdi></a> <a href="/post/2249146">said</a>:<br />
Thank you, sir!!!!</p>
<p dir="auto">It makes sense. Have you tried it? Does it work?</p>
<p dir="auto">Maybe this is where Emerson got his idea for the wave?</p>
</blockquote>
<p dir="auto">They actually work quite well.I had a few with that style of blade and they all readily opened once you got the hang of it.I found that they worked best if you trousers had a reinforced section on the outer seam such as you find on denim jeans.They will also work on a pocket lip but it can be a bit awkward.<br />
Here is another I had posted before with not one but three points. A one armed man's knife made by the Press Button Knife Co.just before 1900.This one is etched with:"Compliments of the A.A.Marks Co. Newark New Jersey Makers of Artificial Limbs" Supposedly these were given free of charge to veterans of the Spanish-American War of 1898 who had lost a hand or an arm in battle. It opened by pressing the button in the front bolster.The curved blade allowed food to be cut with a rocking motion and then the three points acted as a fork to pick up the food from the plate. As an aside the aluminum used in the fancy handle was literally worth more than gold at the time. This was due to the difficulty in mining the bauxite from which aluminum is made.Once a less expensive method was found to mine it,the price dropped drastically.</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/512765_AAMarksPressButton1.jpg" alt="AAMarksPressButton1.jpg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/512767_A.A.MarksPressButtonKnifeCo.2018%20003.jpg" alt="A.A.MarksPressButtonKnifeCo.2018 003.jpg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://forum.multitool.org/post/2249441</link><guid isPermaLink="true">https://forum.multitool.org/post/2249441</guid><dc:creator><![CDATA[Ray S]]></dc:creator><pubDate>Sun, 30 May 2021 01:51:15 GMT</pubDate></item><item><title><![CDATA[Reply to Do most knives need points? on Sat, 29 May 2021 20:50:35 GMT]]></title><description><![CDATA[<p dir="auto">:D</p>
<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/elevenblade" aria-label="Profile: ElevenBlade">@<bdi>ElevenBlade</bdi></a> <a href="/post/2249317">said</a>:<br />
Ive been fidgeting with a Gerber Armbar, which has a sheepfoot blade. It's slowly been growing on me.</p>
<p dir="auto">I've had a long affair with tanto and sheepfoot blades in the past. 2 years ago I threw out two of my unserviceable wharncliff blades.</p>
<p dir="auto">Having spent the better part of two decades with Leatherman and Victorinox, I'd lost any feeling that a sheepfoot blade is particularly advantageous.</p>
<p dir="auto">This thread, combined with some research on Tradional British pocketknife styles has me curious once again to try them out.</p>
<p dir="auto">Not so fast though... I'll be waiting for the September SAK-alike Challenge.</p>
</blockquote>
<p dir="auto"><img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://forum.multitool.org/post/2249339</link><guid isPermaLink="true">https://forum.multitool.org/post/2249339</guid><dc:creator><![CDATA[SgtTowser]]></dc:creator><pubDate>Sat, 29 May 2021 20:50:35 GMT</pubDate></item><item><title><![CDATA[Reply to Do most knives need points? on Sat, 29 May 2021 19:22:14 GMT]]></title><description><![CDATA[<p dir="auto">Ive been fidgeting with a Gerber Armbar, which has a sheepfoot blade. It's slowly been growing on me.</p>
<p dir="auto">I've had a long affair with tanto and sheepfoot blades in the past. 2 years ago I threw out two of my unserviceable wharncliff blades.</p>
<p dir="auto">Having spent the better part of two decades with Leatherman and Victorinox, I'd lost any feeling that a sheepfoot blade is particularly advantageous.</p>
<p dir="auto">This thread, combined with some research on Tradional British pocketknife styles has me curious once again to try them out.</p>
<p dir="auto">Not so fast though... I'll be waiting for the September SAK-alike Challenge.</p>
]]></description><link>https://forum.multitool.org/post/2249317</link><guid isPermaLink="true">https://forum.multitool.org/post/2249317</guid><dc:creator><![CDATA[ElevenBlade]]></dc:creator><pubDate>Sat, 29 May 2021 19:22:14 GMT</pubDate></item><item><title><![CDATA[Reply to Do most knives need points? on Sat, 29 May 2021 18:29:36 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/sgttowser" aria-label="Profile: SgtTowser">@<bdi>SgtTowser</bdi></a> <a href="/post/2249146">said</a>:<br />
Have you tried it? Does it work?</p>
</blockquote>
<p dir="auto">I would assume it does work, though I have not personally tried it.  I prefer my knives with points, so the style doesn't really appeal to me, and I don't own any.</p>
]]></description><link>https://forum.multitool.org/post/2249305</link><guid isPermaLink="true">https://forum.multitool.org/post/2249305</guid><dc:creator><![CDATA[nate j]]></dc:creator><pubDate>Sat, 29 May 2021 18:29:36 GMT</pubDate></item><item><title><![CDATA[Reply to Do most knives need points? on Sat, 29 May 2021 17:12:05 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@nate j <a href="/post/2249143">said</a>:<br />
Not Ray, but I’ll field this one.  The purpose of the concave end is to allow the blade to be opened by catching that end on the edge of a pocket, belt, etc.  thus allowing the knife to be opened by someone with only one arm, hence the name.  I have read that the design and name came about in the aftermath of the Civil War, from which there apparently were enough amputees to make marketing products specifically to them worthwhile.</p>
</blockquote>
<p dir="auto">Had no idea. Thanks for telling us.</p>
<p dir="auto"><img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://forum.multitool.org/post/2249279</link><guid isPermaLink="true">https://forum.multitool.org/post/2249279</guid><dc:creator><![CDATA[pfrsantos]]></dc:creator><pubDate>Sat, 29 May 2021 17:12:05 GMT</pubDate></item><item><title><![CDATA[Reply to Do most knives need points? on Sat, 29 May 2021 05:12:17 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@nate j <a href="/post/2249143">said</a>:<br />
Not Ray, but I’ll field this one.  The purpose of the concave end is to allow the blade to be opened by catching that end on the edge of a pocket, belt, etc.  thus allowing the knife to be opened by someone with only one arm, hence the name.  I have read that the design and name came about in the aftermath of the Civil War, from which there apparently were enough amputees to make marketing products specifically to them worthwhile.</p>
</blockquote>
<p dir="auto">Thank you, sir!!!!</p>
<p dir="auto">It makes sense. Have you tried it? Does it work?</p>
<p dir="auto">Maybe this is where Emerson got his idea for the wave?</p>
]]></description><link>https://forum.multitool.org/post/2249146</link><guid isPermaLink="true">https://forum.multitool.org/post/2249146</guid><dc:creator><![CDATA[SgtTowser]]></dc:creator><pubDate>Sat, 29 May 2021 05:12:17 GMT</pubDate></item><item><title><![CDATA[Reply to Do most knives need points? on Sat, 29 May 2021 05:04:07 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/sgttowser" aria-label="Profile: SgtTowser">@<bdi>SgtTowser</bdi></a> <a href="/post/2249133">said</a>:<br />
Ray, what is the use of the concave end of the one armed man blade? I have seen many and never understood.</p>
</blockquote>
<p dir="auto">Not Ray, but I’ll field this one.  The purpose of the concave end is to allow the blade to be opened by catching that end on the edge of a pocket, belt, etc.  thus allowing the knife to be opened by someone with only one arm, hence the name.  I have read that the design and name came about in the aftermath of the Civil War, from which there apparently were enough amputees to make marketing products specifically to them worthwhile.</p>
]]></description><link>https://forum.multitool.org/post/2249143</link><guid isPermaLink="true">https://forum.multitool.org/post/2249143</guid><dc:creator><![CDATA[nate j]]></dc:creator><pubDate>Sat, 29 May 2021 05:04:07 GMT</pubDate></item><item><title><![CDATA[Reply to Do most knives need points? on Sat, 29 May 2021 04:19:24 GMT]]></title><description><![CDATA[<p dir="auto">Ray and everyone: THANK YOU! You have made my day. Pointless knives are awesome in their variety!!! Great pics.</p>
<p dir="auto">Ray, what is the use of the concave end of the one armed man blade? I have seen many and never understood.</p>
]]></description><link>https://forum.multitool.org/post/2249133</link><guid isPermaLink="true">https://forum.multitool.org/post/2249133</guid><dc:creator><![CDATA[SgtTowser]]></dc:creator><pubDate>Sat, 29 May 2021 04:19:24 GMT</pubDate></item><item><title><![CDATA[Reply to Do most knives need points? on Sat, 29 May 2021 03:11:24 GMT]]></title><description><![CDATA[<p dir="auto">If, after reading this thread, anyone feels they no longer have need of their pointed knives, please let me know.  I will gladly PM you my address, and take all those useless pointed knives off your hands :-D</p>
]]></description><link>https://forum.multitool.org/post/2249110</link><guid isPermaLink="true">https://forum.multitool.org/post/2249110</guid><dc:creator><![CDATA[nate j]]></dc:creator><pubDate>Sat, 29 May 2021 03:11:24 GMT</pubDate></item><item><title><![CDATA[Reply to Do most knives need points? on Sat, 29 May 2021 02:30:42 GMT]]></title><description><![CDATA[<p dir="auto">Last batch.<br />
#1 One armed man's knife by United Boker.<br />
#2 Sailor's knife by Warris dated 1940.<br />
#3 Sailor's knife by Whittingslowe Adelaide Australia.<br />
#4 A trio of fish scaling knives.</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/512672_UnitedBokerOneArmedMansKnife2017%20001.jpg" alt="UnitedBokerOneArmedMansKnife2017 001.jpg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/512674_Warris1940Sailor'sKnife7.JPG" alt="Warris1940Sailor'sKnife7.JPG" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/512676_WhittingsloweAdelaide1573Sailor'sKnife7.JPG" alt="WhittingsloweAdelaide1573Sailor'sKnife7.JPG" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/512678_WoodHandles2018%20002.jpg" alt="WoodHandles2018 002.jpg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://forum.multitool.org/post/2249105</link><guid isPermaLink="true">https://forum.multitool.org/post/2249105</guid><dc:creator><![CDATA[Ray S]]></dc:creator><pubDate>Sat, 29 May 2021 02:30:42 GMT</pubDate></item><item><title><![CDATA[Reply to Do most knives need points? on Sat, 29 May 2021 02:28:06 GMT]]></title><description><![CDATA[<p dir="auto">Got a few more yet........<br />
#1 A scraper/putty knife made by Whitehead &amp; Hoag.<br />
#2 Sailor's knife from 1968.<br />
#3 A handmade knife similar to the Harrison Bros. &amp; Howson knife previously pictured.<br />
#4 Ulster pill sorting knife advertising Tums.</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/512664_Scraper-PuttyKnifePattern.JPG" alt="Scraper-PuttyKnifePattern.JPG" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/512666_StainlessSteel1968Sailor'sKnife7.JPG" alt="StainlessSteel1968Sailor'sKnife7.JPG" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/512668_Theatre5%202019.JPG" alt="Theatre5 2019.JPG" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/512670_UlsterPill3.jpg" alt="UlsterPill3.jpg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://forum.multitool.org/post/2249102</link><guid isPermaLink="true">https://forum.multitool.org/post/2249102</guid><dc:creator><![CDATA[Ray S]]></dc:creator><pubDate>Sat, 29 May 2021 02:28:06 GMT</pubDate></item><item><title><![CDATA[Reply to Do most knives need points? on Sat, 29 May 2021 02:24:53 GMT]]></title><description><![CDATA[<p dir="auto">And they just keep on comin'..........<br />
#1 For removing the pin feathers of poultry by Russell<br />
#2 Grapefruit knife by Russell<br />
#3 A joke of sorts:a knife to hold your garden peas on while you eat them.<br />
#4 A military issue pocket knife from WWI by Schatt &amp; Morgan</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/512654_RussellPoultryKnife2019-1.JPG" alt="RussellPoultryKnife2019-1.JPG" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/512656_RussellStainlessGrapefruitKnife1.JPG" alt="RussellStainlessGrapefruitKnife1.JPG" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/512658_SafetyPeaKnife-2018%20001.jpg" alt="SafetyPeaKnife-2018 001.jpg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/512660_Schatt%26MorganKnife1.JPG" alt="Schatt&amp;MorganKnife1.JPG" class="img-markdown  img-fluid" /></p>
]]></description><link>https://forum.multitool.org/post/2249099</link><guid isPermaLink="true">https://forum.multitool.org/post/2249099</guid><dc:creator><![CDATA[Ray S]]></dc:creator><pubDate>Sat, 29 May 2021 02:24:53 GMT</pubDate></item><item><title><![CDATA[Reply to Do most knives need points? on Sat, 29 May 2021 02:21:47 GMT]]></title><description><![CDATA[<p dir="auto">More points for no points:<br />
#1 Another fruit peeling knife by Pfeilring.<br />
#2 A picnic set with various utensils that clip onto the extra handle.<br />
#3 A rase knife used to cut letters and numbers into wooden barrels and the like. Also to scribe water lines on boats.<br />
#4 Marked,"Rogers Pat Apr 11 91(1891 I assume),I have no clue as to what it was used for.</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/512646_PfeilringSolingenRostfrei%235300-%244%205-25-2018%20002.jpg" alt="PfeilringSolingenRostfrei#5300-$4 5-25-2018 002.jpg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/512648_PicnicSet1A.JPG" alt="PicnicSet1A.JPG" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/512650_RasePattern(TimberScribe).JPG" alt="RasePattern(TimberScribe).JPG" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/512652_RogersPatApr11%2091%201.JPG" alt="RogersPatApr11 91 1.JPG" class="img-markdown  img-fluid" /></p>
]]></description><link>https://forum.multitool.org/post/2249097</link><guid isPermaLink="true">https://forum.multitool.org/post/2249097</guid><dc:creator><![CDATA[Ray S]]></dc:creator><pubDate>Sat, 29 May 2021 02:21:47 GMT</pubDate></item><item><title><![CDATA[Reply to Do most knives need points? on Sat, 29 May 2021 02:17:02 GMT]]></title><description><![CDATA[<p dir="auto">Still more.<br />
#1 Harrison Bros. &amp; Howson hunter with an unusual point.<br />
#2 Called the,"Klever Kleaver" it does a lot of tasks. How it it does these remains to be seen.<br />
#3 Lamson grapefruit knife.<br />
#4 A couple of oyster shuckers.</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/512636_HarrisonBros.%26HowsonKnife2019-1.JPG" alt="HarrisonBros.&amp;HowsonKnife2019-1.JPG" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/512638_KleverKleaver1.JPG" alt="KleverKleaver1.JPG" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/512640_Lamson3.JPG" alt="Lamson3.JPG" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/512642_OysterShuckingPattern.JPG" alt="OysterShuckingPattern.JPG" class="img-markdown  img-fluid" /></p>
]]></description><link>https://forum.multitool.org/post/2249095</link><guid isPermaLink="true">https://forum.multitool.org/post/2249095</guid><dc:creator><![CDATA[Ray S]]></dc:creator><pubDate>Sat, 29 May 2021 02:17:02 GMT</pubDate></item><item><title><![CDATA[Reply to Do most knives need points? on Sat, 29 May 2021 02:13:51 GMT]]></title><description><![CDATA[<p dir="auto">A few more.<br />
#1 A combination dog/horse grooming knife and hoof pick.<br />
#2 Fruit peeling knife by Edward Wusthof.<br />
#3 Supposedly called a,"sliming"knife. Not sure of it's purpose.<br />
#4 A herb/vegetable chopper designed to be used in a bowl made in France.</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/512628_Dog-HorseGroomingPattern.JPG" alt="Dog-HorseGroomingPattern.JPG" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/512630_EdwardWusthofFruitKnife7.JPG" alt="EdwardWusthofFruitKnife7.JPG" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/512632_Geisser1.JPG" alt="Geisser1.JPG" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/512634_HachinetteBreveteS-Gdg1.JPG" alt="HachinetteBreveteS-Gdg1.JPG" class="img-markdown  img-fluid" /></p>
]]></description><link>https://forum.multitool.org/post/2249094</link><guid isPermaLink="true">https://forum.multitool.org/post/2249094</guid><dc:creator><![CDATA[Ray S]]></dc:creator><pubDate>Sat, 29 May 2021 02:13:51 GMT</pubDate></item><item><title><![CDATA[Reply to Do most knives need points? on Sat, 29 May 2021 02:10:59 GMT]]></title><description><![CDATA[<p dir="auto">Some,"pointless" knives.<br />
#1 Parker,"18 Wheeler".Supposedly used to remove pebbles from between tire treads.<br />
#2 Bonum folding palette knife for spreading paint.<br />
#3 Case &amp; Cattaraugus folding machetes;part of a WWII bailout package for air crew members.<br />
#4 Clauss bread knife.</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/512616_18Wheeler.JPG" alt="18Wheeler.JPG" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/512618_BonumPaletteKnife2019-1.JPG" alt="BonumPaletteKnife2019-1.JPG" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/512620_Case%26CattaraugusFoldingMachetes.jpg" alt="Case&amp;CattaraugusFoldingMachetes.jpg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/512622_ClaussBreadKnife1.JPG" alt="ClaussBreadKnife1.JPG" class="img-markdown  img-fluid" /></p>
]]></description><link>https://forum.multitool.org/post/2249091</link><guid isPermaLink="true">https://forum.multitool.org/post/2249091</guid><dc:creator><![CDATA[Ray S]]></dc:creator><pubDate>Sat, 29 May 2021 02:10:59 GMT</pubDate></item></channel></rss>