Multitool.org Forum
+-

Hello Lurker! Remove this ad and much more by logging in.


And so it begins.... (My adventures into Alox!)

Syph007 · 6008 · 1071024
« previous next »
Pages: 1 ... 123 124 125 126 127 ... 201   Go Down

us Offline HarleyXJGuy

  • Absolutely No Life Club
  • *******
    • Posts: 8,805
Re: And so it begins.... (My adventures into Alox!)
Reply #3720 on: April 22, 2016, 04:32:11 AM
Quote from: Syph007 on April 21, 2016, 10:09:24 PM
Quote from: Fortytwo on April 21, 2016, 10:03:15 PM
Nice to see the progress! I would have recommended holding some wooden lips with a couple of clamps but you got it on in the end so it's a bit late now.

Ya if I didnt already have the mill in the air I would have made some wood squares to do the job, but its done now at least!

It fits well in the space I cleared for it too.

(Image removed from quote.)

Best laundry room in the history of clothing.
Merit Badges Participate in a Challenge thread and post a photo of  a Case knife  for 30 days Participate in a Challenge thread and post a photo  of 84 and 85 mm Swiss Army Knives (and Wengers) for 30 days Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for sixty (60) consecutive days. Participate  in a Challenge thread and post a photo of a Leatherman Skeletool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days.

ca Offline Syph007

  • Global Moderator
  • *
  • Absolutely No Life Club
  • *
    • Posts: 9,831
  • SAK Surgeon
Re: And so it begins.... (My adventures into Alox!)
Reply #3721 on: April 24, 2016, 11:57:51 PM
Here is the super popular 2 layer everyone seems to want.  Note to Victorinox, you might consider this a new EDC lite model as an upgrade from the compact.  Everyone hates the hook and loves the awl.

This one has a blue anodized Ti liner as well to change it up a bit from my standard brass.











And one extreme closeup to show the fit/finish and detail.  That little spacer will never move from being lined up to the liner as I riveted them together with a Ti rivet.  :D

« Last Edit: April 25, 2016, 12:20:14 AM by Syph007 »
PM me or email sakmodder [at] gmail . com if you are looking for custom SAK work.

Modding thread : Here
Website : WWW.SAKModder.com 
Facebook : SAKModder
Instagram : robertjlessard
Youtube : www.youtube.com/robertjlessard

us Offline MadPlumbarian

  • *
  • Point Of No Return
  • **********
    • Posts: 37,144
  • Plumbers Know Their Crap!!
Re: And so it begins.... (My adventures into Alox!)
Reply #3722 on: April 25, 2016, 12:10:36 AM
That is freaking sick! Wow, that's like the minimal all in one! Hey here's an idea, what if you could make like a hidden tool? Idk what that new toy of yours can do, but what if you could put a file like surface on the liner, but only on the part behind the Philips? So it's kinda hidden?
JR
"The-Mad-Plumbarian" The Punisher Of Pipes!!! JR
As I sit on my Crapper Throne in the Reading Room and explode on the Commode, thinking, how my flush beat John’s and Jerry’s pair? Jack’s had to run for the Water Closet yet ended up tripping on a Can bowing and hitting his Head on the Porcelain God! 🚽
Merit Badges Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed. Participate  in Challenge thread and post a photo of a Farmer X SAK for thirty (30) consecutive days. Post a picture and recipe for a batch of Chili that you have made Start a thread with photos of at least 1 MTO branded tool in your collection Must buy an item through the MTo Store Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread with photos of your zip ties in use Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with photos of your carabiners in use Start a new thread with a photo of your custom ALOX with scissors Must start a thread with a photo of at least five (5) of your watches Start a thread with a photo of a repair you made with duct tape Start a new thread and post a picture of fire making kit or fire with a multitool Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread demonstrating paracord knot tying Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread with photos of camping, including those showing preferred camping equipment Start a new thread showing photos of your outdoor cooking Start a new thread showing photos of at least 3 different sporks in use

us Offline Monrogue

  • *
  • Absolute Zombie Club
  • *********
    • Posts: 23,284
  • Wooooo!
Re: And so it begins.... (My adventures into Alox!)
Reply #3723 on: April 25, 2016, 01:59:29 AM
Nice one Syph.  One of those with the nail file hook and a fish scaler would be an ideal slim model for me.

Sent from my SM-G920R4 using Tapatalk

K-Tibbs
Merit Badges Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with a photo of your custom ALOX with scissors Must buy an item through the MTo Store Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Test,please ignore Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread and post a photo of the multitool for thirty (30) consecutive days. For those who posted like a boss. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread with pictures of a Fish Scaler in use Must start a thread with a photo of your birth year SAK Must start a thread with a photo of your EDC watch Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with photos of a Japanese made PST in your collection Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days.

us Offline HarleyXJGuy

  • Absolutely No Life Club
  • *******
    • Posts: 8,805
Re: And so it begins.... (My adventures into Alox!)
Reply #3724 on: April 25, 2016, 02:02:10 AM
Quote from: Monrogue on April 25, 2016, 01:59:29 AM
Nice one Syph.  One of those with the nail file hook and a fish scaler would be an ideal slim model for me.

Sent from my SM-G920R4 using Tapatalk

You and that fish scaler.
Merit Badges Participate in a Challenge thread and post a photo of  a Case knife  for 30 days Participate in a Challenge thread and post a photo  of 84 and 85 mm Swiss Army Knives (and Wengers) for 30 days Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for sixty (60) consecutive days. Participate  in a Challenge thread and post a photo of a Leatherman Skeletool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days.

us Offline Monrogue

  • *
  • Absolute Zombie Club
  • *********
    • Posts: 23,284
  • Wooooo!
Re: And so it begins.... (My adventures into Alox!)
Reply #3725 on: April 25, 2016, 02:07:24 AM
Quote from: HarleyXJGuy on April 25, 2016, 02:02:10 AM
Quote from: Monrogue on April 25, 2016, 01:59:29 AM
Nice one Syph.  One of those with the nail file hook and a fish scaler would be an ideal slim model for me.

Sent from my SM-G920R4 using Tapatalk

You and that fish scaler.
It's become one of my favorite implements.  Great little back scratcher and misc tool in general :tu:

Sent from my SM-G920R4 using Tapatalk

K-Tibbs
Merit Badges Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with a photo of your custom ALOX with scissors Must buy an item through the MTo Store Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Test,please ignore Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread and post a photo of the multitool for thirty (30) consecutive days. For those who posted like a boss. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread with pictures of a Fish Scaler in use Must start a thread with a photo of your birth year SAK Must start a thread with a photo of your EDC watch Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with photos of a Japanese made PST in your collection Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days.

us Offline HarleyXJGuy

  • Absolutely No Life Club
  • *******
    • Posts: 8,805
Re: And so it begins.... (My adventures into Alox!)
Reply #3726 on: April 25, 2016, 02:09:38 AM
Quote from: Monrogue on April 25, 2016, 02:07:24 AM
Quote from: HarleyXJGuy on April 25, 2016, 02:02:10 AM
Quote from: Monrogue on April 25, 2016, 01:59:29 AM
Nice one Syph.  One of those with the nail file hook and a fish scaler would be an ideal slim model for me.

Sent from my SM-G920R4 using Tapatalk

You and that fish scaler.
It's become one of my favorite implements.  Great little back scratcher and misc tool in general :tu:

Sent from my SM-G920R4 using Tapatalk

I have a back scratcher I call my wife.
Merit Badges Participate in a Challenge thread and post a photo of  a Case knife  for 30 days Participate in a Challenge thread and post a photo  of 84 and 85 mm Swiss Army Knives (and Wengers) for 30 days Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for sixty (60) consecutive days. Participate  in a Challenge thread and post a photo of a Leatherman Skeletool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days.

us Offline Monrogue

  • *
  • Absolute Zombie Club
  • *********
    • Posts: 23,284
  • Wooooo!
Re: And so it begins.... (My adventures into Alox!)
Reply #3727 on: April 25, 2016, 02:44:09 AM
Quote from: HarleyXJGuy on April 25, 2016, 02:09:38 AM
Quote from: Monrogue on April 25, 2016, 02:07:24 AM
Quote from: HarleyXJGuy on April 25, 2016, 02:02:10 AM
Quote from: Monrogue on April 25, 2016, 01:59:29 AM
Nice one Syph.  One of those with the nail file hook and a fish scaler would be an ideal slim model for me.

Sent from my SM-G920R4 using Tapatalk

You and that fish scaler.
It's become one of my favorite implements.  Great little back scratcher and misc tool in general :tu:

Sent from my SM-G920R4 using Tapatalk

I have a back scratcher I call my wife.
Even better, but my wife doesn't fit in my pocket....

Sent from my SM-G920R4 using Tapatalk

K-Tibbs
Merit Badges Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with a photo of your custom ALOX with scissors Must buy an item through the MTo Store Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Test,please ignore Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread and post a photo of the multitool for thirty (30) consecutive days. For those who posted like a boss. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread with pictures of a Fish Scaler in use Must start a thread with a photo of your birth year SAK Must start a thread with a photo of your EDC watch Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with photos of a Japanese made PST in your collection Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days.

us Offline yud

  • *
  • No Life Club
  • ******
    • Posts: 2,761
  • Still has a SOGgy feeling
Re: And so it begins.... (My adventures into Alox!)
Reply #3728 on: April 25, 2016, 02:46:22 AM
Quote from: Monrogue on April 25, 2016, 02:44:09 AM
Quote from: HarleyXJGuy on April 25, 2016, 02:09:38 AM
Quote from: Monrogue on April 25, 2016, 02:07:24 AM
Quote from: HarleyXJGuy on April 25, 2016, 02:02:10 AM
Quote from: Monrogue on April 25, 2016, 01:59:29 AM
Nice one Syph.  One of those with the nail file hook and a fish scaler would be an ideal slim model for me.

Sent from my SM-G920R4 using Tapatalk

You and that fish scaler.
It's become one of my favorite implements.  Great little back scratcher and misc tool in general :tu:

Sent from my SM-G920R4 using Tapatalk

I have a back scratcher I call my wife.
Even better, but my wife doesn't fit in my pocket....

Sent from my SM-G920R4 using Tapatalk

That's what she said


Just another weirdo with a beard :B:

Knight of the SOSAK and Defender of the sacred nail file
Merit Badges Start a new thread including a photo of shooting at least two (2) different firearms and at least one (1) photo of target (firearms) Start a new thread and post a picture of fire making kit or fire with a multitool Start a new thread showing photos of your outdoor cooking Start a new thread with a photo showing the axe in use Start a new thread and post a photo of the discontinued sak/mt for thirty (30) consecutive days. Must update or add a page on SAKWiki Must start new thread with photos of multitools (Magazine/Catalogue type photos) Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a new thread with a photo showing the Hook in use Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread with pictures of a Fish Scaler in use Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included)

ca Offline Syph007

  • Global Moderator
  • *
  • Absolutely No Life Club
  • *
    • Posts: 9,831
  • SAK Surgeon
Re: And so it begins.... (My adventures into Alox!)
Reply #3729 on: April 27, 2016, 08:33:23 PM
My flood coolant module is going to get installed tomorrow and I can finally do some first movement tests with the PC hooked up to the mill. :D

Ive had to pause that for now though so I could get some more custom SAKs out the door and bills paid.

Finished up another compact/tinker model and a knifeless CT today.  :D











This pic shows how much thinner my version is versus a stock cellidor compact.  :D

PM me or email sakmodder [at] gmail . com if you are looking for custom SAK work.

Modding thread : Here
Website : WWW.SAKModder.com 
Facebook : SAKModder
Instagram : robertjlessard
Youtube : www.youtube.com/robertjlessard

us Offline Motojesse

  • New User
    • Posts: 2
Re: And so it begins.... (My adventures into Alox!)
Reply #3730 on: April 28, 2016, 02:13:22 PM
I love that compact tinker. The difference in thickness is quite exciting!

us Offline HarleyXJGuy

  • Absolutely No Life Club
  • *******
    • Posts: 8,805
Re: And so it begins.... (My adventures into Alox!)
Reply #3731 on: April 28, 2016, 04:54:05 PM
Quote from: Motojesse on April 28, 2016, 02:13:22 PM

The difference in thickness is quite exciting!



Thats what she said.
Merit Badges Participate in a Challenge thread and post a photo of  a Case knife  for 30 days Participate in a Challenge thread and post a photo  of 84 and 85 mm Swiss Army Knives (and Wengers) for 30 days Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for sixty (60) consecutive days. Participate  in a Challenge thread and post a photo of a Leatherman Skeletool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days.

ca Offline Syph007

  • Global Moderator
  • *
  • Absolutely No Life Club
  • *
    • Posts: 9,831
  • SAK Surgeon
Re: And so it begins.... (My adventures into Alox!)
Reply #3732 on: April 28, 2016, 05:47:08 PM
Quote from: HarleyXJGuy on April 28, 2016, 04:54:05 PM
Quote from: Motojesse on April 28, 2016, 02:13:22 PM

The difference in thickness is quite exciting!



Thats what she said.

Lol.  Darn right!
PM me or email sakmodder [at] gmail . com if you are looking for custom SAK work.

Modding thread : Here
Website : WWW.SAKModder.com 
Facebook : SAKModder
Instagram : robertjlessard
Youtube : www.youtube.com/robertjlessard

us Offline OHIO

  • Newbie
  • *
    • Posts: 6
Re: And so it begins.... (My adventures into Alox!)
Reply #3733 on: April 28, 2016, 08:42:46 PM
Not real impressed with the limited edition 2016 models.
http://forum.multitool.org/index.php?topic=65892.0

I was really hoping for a pioneer x limited edition.  They do have one on victorinox website with a damascus blade but it's $185 and it's out of stock. https://www.swissarmy.com/us/en/Products/Swiss-Army-Knives/Medium-Pocket-Knives/Pioneer-X/p/0.8231.J16
IMG_20160421_171910.jpg
* IMG_20160421_171910.jpg (Filesize: 58.89 KB)
td4nnlyl.jpg
* td4nnlyl.jpg (Filesize: 65.11 KB)
« Last Edit: April 28, 2016, 09:25:02 PM by OHIO »

au Offline Huntsman

  • Global Moderator
  • *
  • No Life Club
  • *
    • Posts: 4,620
Re: And so it begins.... (My adventures into Alox!)
Reply #3734 on: April 29, 2016, 03:14:24 AM
Quote from: Syph007 on April 28, 2016, 05:47:08 PM
Quote from: HarleyXJGuy on April 28, 2016, 04:54:05 PM
Quote from: Motojesse on April 28, 2016, 02:13:22 PM
The difference in thickness is quite exciting!
Thats what she said.
Lol.  Darn right!

Amazing - I would say - You really notice it more on the SAKs with fewer layers - The relative difference is greater!
Those cellidor scales really are quite thick when you look at that photo.

A single layer Ti Syph custom would almost be unnoticeable in a pocket.
Have you ever done one Syph?

I have a lovely old 58mm alox Executive (old version of the Companion) - Hey here it is!! - The one on the end



You can't tell this from the photo - But it is unbelievably slim
I'd guess the scales are under a mm think - In fact not much thicker than liners
Merit Badges Must update or add a page on SAKWiki Start a new thread with photos of a Japanese made PST in your collection Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Start a thread with photos of at least 1 MTO branded tool in your collection Must buy an item through the MTo Store Start a new thread with a photo of your custom ALOX with scissors Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Must start a thread with a photo of your birth year SAK Must start a thread showing a photo of at least three BO tools Start a thread with photos of at least eight different colored ALOX models in your collection Start a new thread and post a photo of a flashlight as part of your EDC Start a thread with a photo of a repair you made with duct tape Must put something in order and provide link to the post. Start a new thread with a photo of custom or non standard SAK scales in your collection

us Offline Poncho65

  • Global Moderator
  • *
  • Just Bananas
  • *
    • Posts: 86,099
Re: And so it begins.... (My adventures into Alox!)
Reply #3735 on: April 29, 2016, 03:34:39 PM
That Tormach is awesome :o I know you will have fun with that thing :D Here's to many many Syph custom SAKs :cheers:
Merit Badges Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must update or add a page on the Multitool.org Multitool Encyclopedia Carry an orange item and post a picture of it everyday for 30 days. Start a thread with a photo of at least ten OPT's in your collection Participate in a challenge by carrying  a Leatherman Pulse or ST200 and post a photo of it  for thirty (30) consecutive days. Start a new thread and post a photo of the Leatherman MiniTool for thirty (30) consecutive days. In this challenge,  carry one(1) Pliers-based or Non-pliers multitool that we always have prejudice against, hate or even fear and post a picture everyday for 30 days Using EDC items randomly selected with a poker hand, post a photo of your EDC or a component of the EDC that got used during the course of the day for 4 weeks (or 30 consecutive days) In the spirit of the Batman utility belt. A 30 day challenge were you have to have at least 2 things clipped to your belt (preferably more). Start a thread and post a picture of your clipped gear each day for 30 days. Participate  in a Challenge thread and post a photo of a Leatherman Skeletool for thirty (30) consecutive days. Only for the 14th year Anniversary Challenge. Post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. You have one of your pictures in the 2020 calendar or in top three of the calendar poll in any month of the given year. Participate  in a Challenge thread and post a photo of a LM Pocket Survival Tool for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Start a new thread and post a photo of the LM Crunch  Multitool for fifteen (15) consecutive days. Start a new thread and post a photo of the keychain for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. You have one of your pictures in the 2018 calendar or in top three of the calendar poll in any month of the given year. You have one of your pictures in the 2019 calendar or in top three of the calendar poll in any month of the given year. You have one of your pictures in the 2017 calendar or in top three of the calendar poll in any month of the given year. Start a new thread and post a photo of the multitool for thirty (30) consecutive days.

us Offline s1xty7

  • Sr. Member
  • ****
    • Posts: 305
Re: And so it begins.... (My adventures into Alox!)
Reply #3736 on: April 29, 2016, 06:53:31 PM
Its been fun to watch you get that Tormach in place and exciting to think of the possibilities!  Geared up to start making 58's with titanium pen scales yet?  :D
Merit Badges Must update or add a page on SAKWiki

ca Offline Syph007

  • Global Moderator
  • *
  • Absolutely No Life Club
  • *
    • Posts: 9,831
  • SAK Surgeon
Re: And so it begins.... (My adventures into Alox!)
Reply #3737 on: April 29, 2016, 07:32:57 PM
Ive got so many ideas for things to make when I get the Tormach running I dont know where to start!

I had a bunch of SAKs to get out the door though so Ive had to pause for a few days to finish work.  Also tax dealine in Canada is tomorrow and well Ive been procrastinating doing it.  Ive got a years worth of receipts and crap to go through from 2015 and get sorted by tomorrow.  Then I will be back working on the Tormach on Sunday.  Ive now got all the parts and I just need to finish :D
PM me or email sakmodder [at] gmail . com if you are looking for custom SAK work.

Modding thread : Here
Website : WWW.SAKModder.com 
Facebook : SAKModder
Instagram : robertjlessard
Youtube : www.youtube.com/robertjlessard

ca Offline Syph007

  • Global Moderator
  • *
  • Absolutely No Life Club
  • *
    • Posts: 9,831
  • SAK Surgeon
Re: And so it begins.... (My adventures into Alox!)
Reply #3738 on: April 29, 2016, 09:20:10 PM
It's been quite awhile since Ive done a monster alox build...  Did one today though.  :D















PM me or email sakmodder [at] gmail . com if you are looking for custom SAK work.

Modding thread : Here
Website : WWW.SAKModder.com 
Facebook : SAKModder
Instagram : robertjlessard
Youtube : www.youtube.com/robertjlessard

us Offline sLaughterMed

  • *
  • No Life Club
  • ******
    • Posts: 3,450
  • Nothing's typical around here
Re: And so it begins.... (My adventures into Alox!)
Reply #3739 on: April 29, 2016, 09:41:50 PM
The backside of those monster Alox's are just so pretty :drool:
Laughter is the best Medicine
Slaughter is just Laughter with an "S"

We are looking for Multitool Encyclopedia Editors! If you are interested, please give me a PM!

The Multitool Encyclopedia Editing for Dummies Page: http://forum.multitool.org/index.php/topic,65751.0.html
Multitool Encyclopedia Suggested Edits Page: http://forum.multitool.org/index.php/topic,65746.0.html
Merit Badges Start a thread with photos of at least 5 different MP600 models in your collection Take part in the christmas pool or a rak type giveaway. Those wanting to say thank you for a rak may also nominate for the santa. Must update or add a page on the Multitool.org Multitool Encyclopedia Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Test,please ignore Must start a thread showing a photo of at least five BO tools Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Must update or add a page on SAKWiki

es Offline alexTOOL

  • No Life Club
  • ******
    • Posts: 1,227
Re: And so it begins.... (My adventures into Alox!)
Reply #3740 on: April 30, 2016, 12:44:10 AM
Nice!  :gimme:

But that beast must be around 150 gms at least!   :ahhh

ca Offline Syph007

  • Global Moderator
  • *
  • Absolutely No Life Club
  • *
    • Posts: 9,831
  • SAK Surgeon
Re: And so it begins.... (My adventures into Alox!)
Reply #3741 on: April 30, 2016, 12:53:02 AM
Quote from: alexTOOL on April 30, 2016, 12:44:10 AM
Nice!  :gimme:

But that beast must be around 150 gms at least!   :ahhh

Close!

I just weighed it.  154

The backsprings are probably 1/3 the weight.  The next evolution in SAK modding I think is to address that.  :D
« Last Edit: April 30, 2016, 03:14:10 AM by Syph007 »
PM me or email sakmodder [at] gmail . com if you are looking for custom SAK work.

Modding thread : Here
Website : WWW.SAKModder.com 
Facebook : SAKModder
Instagram : robertjlessard
Youtube : www.youtube.com/robertjlessard

us Offline ICanFixThat

  • No Life Club
  • ******
    • Posts: 4,534
Re: And so it begins.... (My adventures into Alox!)
Reply #3742 on: April 30, 2016, 02:50:25 AM
Quote from: Syph007 on April 24, 2016, 11:57:51 PM
Here is the super popular 2 layer everyone seems to want.  Note to Victorinox, you might consider this a new EDC lite model as an upgrade from the compact.  Everyone hates the hook and loves the awl.

This one has a blue anodized Ti liner as well to change it up a bit from my standard brass.

....

And one extreme closeup to show the fit/finish and detail.  That little spacer will never move from being lined up to the liner as I riveted them together with a Ti rivet.  :D

(Image removed from quote.)
:tu: :drool: :drool: :drool: :drool: :drool:

us Offline tattoosteve99

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 6,319
Re: And so it begins.... (My adventures into Alox!)
Reply #3743 on: April 30, 2016, 03:05:34 AM
All you need to do is send the Ti and have it zirc coated and it will be black
If I remember correctly, wait, what was I saying?
Merit Badges Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a thread with photos of at least five different colored ALOX models in your collection Start a new thread with photos of camping, including those showing preferred camping equipment Start a new thread demonstrating paracord knot tying Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread and post a photo of a flashlight as part of your EDC Must start a thread with a photo of your EDC watch Must start a thread with a photo of your birth year SAK Must buy something on EDCSource

us Offline Monrogue

  • *
  • Absolute Zombie Club
  • *********
    • Posts: 23,284
  • Wooooo!
Re: And so it begins.... (My adventures into Alox!)
Reply #3744 on: April 30, 2016, 03:36:37 AM
Nice beast Syph :tu:

Sent from my SM-G920R4 using Tapatalk

K-Tibbs
Merit Badges Start a new thread and post a photo of any gear for thirty (30) consecutive days during the MTo anniversary month. Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days. Start a thread with photos of at least 1 MTO branded tool in your collection Start a new thread with a photo of your custom ALOX with scissors Must buy an item through the MTo Store Start a new thread and post a photo of the modified sak (scale swap not included) for thirty (30) consecutive days. Start a new thread and post a photo of the multitool for thirty (30) consecutive days. Test,please ignore Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread and post a photo of the multitool for thirty (30) consecutive days. For those who posted like a boss. Post your pocket dump photos then challenge two more members who must post their pocket dump photos within 24hrs for you to get the badge. Start a new thread with pictures of a Fish Scaler in use Must start a thread with a photo of your birth year SAK Must start a thread with a photo of your EDC watch Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread with a photo of a modded knife or multitool with your EDC Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread with photos of a Japanese made PST in your collection Start a new thread and post a photo of the leatherman (supertool, core, hacks) for thirty (30) consecutive days.

ca Offline Syph007

  • Global Moderator
  • *
  • Absolutely No Life Club
  • *
    • Posts: 9,831
  • SAK Surgeon
Re: And so it begins.... (My adventures into Alox!)
Reply #3745 on: May 01, 2016, 12:03:56 AM
I finished doing my taxes! One and a half days to go through a pile of receipts and bills isnt too bad.

Now... back to CNC setup!!! I'll have another video shortly hopefully showing first test movements and flood coolant setup.
PM me or email sakmodder [at] gmail . com if you are looking for custom SAK work.

Modding thread : Here
Website : WWW.SAKModder.com 
Facebook : SAKModder
Instagram : robertjlessard
Youtube : www.youtube.com/robertjlessard

nz Offline zoidberg

  • Global Moderator
  • Point Of No Return
  • *
    • Posts: 37,773
Re: And so it begins.... (My adventures into Alox!)
Reply #3746 on: May 01, 2016, 12:04:48 AM
 :popcorn:

us Offline MadPlumbarian

  • *
  • Point Of No Return
  • **********
    • Posts: 37,144
  • Plumbers Know Their Crap!!
Re: And so it begins.... (My adventures into Alox!)
Reply #3747 on: May 01, 2016, 07:24:15 AM
"The-Mad-Plumbarian" The Punisher Of Pipes!!! JR
As I sit on my Crapper Throne in the Reading Room and explode on the Commode, thinking, how my flush beat John’s and Jerry’s pair? Jack’s had to run for the Water Closet yet ended up tripping on a Can bowing and hitting his Head on the Porcelain God! 🚽
Merit Badges Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed. Participate  in Challenge thread and post a photo of a Farmer X SAK for thirty (30) consecutive days. Post a picture and recipe for a batch of Chili that you have made Start a thread with photos of at least 1 MTO branded tool in your collection Must buy an item through the MTo Store Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread with photos of your zip ties in use Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with photos of your carabiners in use Start a new thread with a photo of your custom ALOX with scissors Must start a thread with a photo of at least five (5) of your watches Start a thread with a photo of a repair you made with duct tape Start a new thread and post a picture of fire making kit or fire with a multitool Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread demonstrating paracord knot tying Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread with photos of camping, including those showing preferred camping equipment Start a new thread showing photos of your outdoor cooking Start a new thread showing photos of at least 3 different sporks in use

us Offline Jetbo

  • Full Member
  • ***
    • Posts: 128
Re: And so it begins.... (My adventures into Alox!)
Reply #3748 on: May 01, 2016, 04:31:55 PM
Any plans on making those 93mm cybertool bit holders? :pok: I am thinking a Electrician with a cybertool layer in the middle would be sweet  :drool:

us Offline MadPlumbarian

  • *
  • Point Of No Return
  • **********
    • Posts: 37,144
  • Plumbers Know Their Crap!!
Re: And so it begins.... (My adventures into Alox!)
Reply #3749 on: May 01, 2016, 05:28:51 PM
Quote from: Jetbo on May 01, 2016, 04:31:55 PM
Any plans on making those 93mm cybertool bit holders? :pok: I am thinking a Electrician with a cybertool layer in the middle would be sweet  :drool:
What would be cool is that bit holder, the plastic thingy in a metal form!
JR
"The-Mad-Plumbarian" The Punisher Of Pipes!!! JR
As I sit on my Crapper Throne in the Reading Room and explode on the Commode, thinking, how my flush beat John’s and Jerry’s pair? Jack’s had to run for the Water Closet yet ended up tripping on a Can bowing and hitting his Head on the Porcelain God! 🚽
Merit Badges Must post a step by step pictorial of a knife or MT Mod, done by you that includes changing the main chassis of the tool in a significant way. By machining, welding or cutting original design to accept new tool loads. Requests will be reviewed. Participate  in Challenge thread and post a photo of a Farmer X SAK for thirty (30) consecutive days. Post a picture and recipe for a batch of Chili that you have made Start a thread with photos of at least 1 MTO branded tool in your collection Must buy an item through the MTo Store Start a new thread with photos of your titanium gear with a multitool or sak Start a new thread with photos of your zip ties in use Join the brave and happy few, who choose a different path. Enter on the boulevard of broken dreams. Start a new thread with photos of your carabiners in use Start a new thread with a photo of your custom ALOX with scissors Must start a thread with a photo of at least five (5) of your watches Start a thread with a photo of a repair you made with duct tape Start a new thread and post a picture of fire making kit or fire with a multitool Must post a step by step pictorial of a knife or multitool modification (scale swap not included) Start a new thread demonstrating paracord knot tying Start a new thread and post a photo of a flashlight as part of your EDC Start a new thread with a photo of custom or non standard SAK scales in your collection Start a new thread with a photo of a modded knife or multitool with your EDC Start a new thread with photos of camping, including those showing preferred camping equipment Start a new thread showing photos of your outdoor cooking Start a new thread showing photos of at least 3 different sporks in use

Pages: 1 ... 123 124 125 126 127 ... 201   Go Up
 

Donations
Operational Funds

Help us keep the Unworkable working!
Donate with PayPal!
May Goal: $300.00
Due Date: May 31
Total Receipts: $77.16
PayPal Fees: $3.91
Net Balance: $73.25
Below Goal: $226.75
Site Currency: USD
24% 
May Donations

Community Links
Multitool.org
Multitool Gallery
Multitool Encyclopedia
SAKWiki
Swiss Army Knights

Powered by EzPortal