Leatherman clip watch

RaptorMan · **on:** December 12, 2008, 02:39:11 AM

Are these new or have they been around for awhile?
I wouldnt mind one but they go for about $60 on Ebay

Leatherman123 · **Reply #1 on:** December 12, 2008, 02:48:01 AM

I have one similar. I got it with a Blast sometime last year..

RaptorMan · **Reply #2 on:** December 12, 2008, 02:50:00 AM

Im going to have to look for one of these to clip to my blind bag when I go hunting I dont usually carry a watch due to the gloves I wear. My cell is a pain in the butt to get out so this would work great.

donvito · **Reply #3 on:** December 12, 2008, 02:50:42 AM

Any good, quality, where is it made?

RaptorMan · **Reply #4 on:** December 12, 2008, 03:02:25 AM

Not sure where its made but they are in Austrailia is where they have them listed at on Ebay. I will do some more searching

RaptorMan · **Reply #5 on:** December 12, 2008, 03:07:55 AM

Just found the one I really want.........but really cant find anything as to where they are made?

Leatherman123 · **Reply #6 on:** December 12, 2008, 03:08:44 AM

I'd send you mine, but I can't find it!! I will look this weekend and PM you!

RaptorMan · **Reply #7 on:** December 12, 2008, 03:23:02 AM

That would be great....Let me know what you need for it.

Thanks

MultiMat · **Reply #8 on:** December 12, 2008, 03:51:32 AM

Rapman , I have one just like the one in the second pic. I got it last march with a Surge package. My one was made in Japan.The first one was faulty I got a replacement which I use every day. It is actually wearing in a cool way the rubber coating has worn in places to reveal a brass colored surface

. I will post some pics latter if you like. Quality I would say is ok not brilliant.

Poncho65 · **Reply #9 on:** December 12, 2008, 03:58:58 AM

Quote from: MultiMat on December 12, 2008, 03:51:32 AM

Rapman , I have one just like the one in the second pic. I got it last march with a Surge package. My one was made in Japan.The first one was faulty I got a replacement which I use every day. It is actually wearing in a cool way the rubber coating has worn in places to reveal a brass colored surface . I will post some pics latter if you like. Quality I would say is ok not brilliant.

I have the same one it came together with my Blast, Very good watch I wear it everyday to work and have had no problems with it

(I am very rough on clip watches and this one seems to be rugged enough to handle me

) Mine also has some wear but it hasn't affected it in any way

By the way MM is there a warranty with the watch?

If so I need to check into it or do you know anything about it?

MultiMat · **Reply #10 on:** December 12, 2008, 04:06:06 AM

Quote from: Poncho65 on December 12, 2008, 03:58:58 AM

Quote from: MultiMat on December 12, 2008, 03:51:32 AM
Rapman , I have one just like the one in the second pic. I got it last march with a Surge package. My one was made in Japan.The first one was faulty I got a replacement which I use every day. It is actually wearing in a cool way the rubber coating has worn in places to reveal a brass colored surface . I will post some pics latter if you like. Quality I would say is ok not brilliant.

I have the same one it came together with my Blast, Very good watch I wear it everyday to work and have had no problems with it (I am very rough on clip watches and this one seems to be rugged enough to handle me ) Mine also has some wear but it hasn't affected it in any way

By the way MM is there a warranty with the watch? If so I need to check into it or do you know anything about it?

From memory Ponch I think the paperwork that came with the watch said 12mnths , but I could be wrong.

Leatherman123 · **Reply #11 on:** December 12, 2008, 04:08:20 AM

Yeah, I still have the manual! 12 months indeed!!

eodtech · **Reply #12 on:** December 12, 2008, 04:11:23 AM

I believe they are " clip watches " made by Dakota Watch Company

https://dakota.webfeatsecurity.com/watches.aspx?f=t&Features=9&Page=1

Make sure to click on the "pages" under the gallery picture - there are 15 pages of watches !!

RaptorMan · **Reply #13 on:** December 12, 2008, 01:57:35 PM

Quote from: MultiMat on December 12, 2008, 03:51:32 AM

Rapman , I have one just like the one in the second pic. I got it last march with a Surge package. My one was made in Japan.The first one was faulty I got a replacement which I use every day. It is actually wearing in a cool way the rubber coating has worn in places to reveal a brass colored surface . I will post some pics latter if you like. Quality I would say is ok not brilliant.

I would be interested in seeing it. I typically wear a $20 cheap timex to work and have a nice fossil for going out, but need something for hunting.

Benner · **Reply #14 on:** December 12, 2008, 05:54:13 PM

Funny this should come up actually as I was thinking about going to this style of watch for a few days now. Didn't know LM did them, thanks.

joebw · **Reply #15 on:** December 12, 2008, 06:15:24 PM

Go to http://www.leatherman.com.au/ and you'll see the first watch pictured. They've been shown on this site for some three or four years. I've never found a place to buy them.

Cheers - Joe

Poncho65 · **Reply #16 on:** December 13, 2008, 01:18:29 AM

Quote from: MultiMat on December 12, 2008, 04:06:06 AM

Quote from: Poncho65 on December 12, 2008, 03:58:58 AM
Quote from: MultiMat on December 12, 2008, 03:51:32 AM
Rapman , I have one just like the one in the second pic. I got it last march with a Surge package. My one was made in Japan.The first one was faulty I got a replacement which I use every day. It is actually wearing in a cool way the rubber coating has worn in places to reveal a brass colored surface . I will post some pics latter if you like. Quality I would say is ok not brilliant.

I have the same one it came together with my Blast, Very good watch I wear it everyday to work and have had no problems with it (I am very rough on clip watches and this one seems to be rugged enough to handle me ) Mine also has some wear but it hasn't affected it in any way

By the way MM is there a warranty with the watch? If so I need to check into it or do you know anything about it?
From memory Ponch I think the paperwork that came with the watch said 12mnths , but I could be wrong.

Thanks MM

of course why would I read the paperwork

RaptorMan · **Reply #17 on:** December 13, 2008, 01:34:17 AM

Quote from: joebw on December 12, 2008, 06:15:24 PM

Go to http://www.leatherman.com.au/ and you'll see the first watch pictured. They've been shown on this site for some three or four years. I've never found a place to buy them.

Cheers - Joe

Wonder why the US website doesnt have any of this stuff?

MultiMat · **Reply #18 on:** December 13, 2008, 01:48:06 AM

My watch came in a tin box set with my Surge. The time adjusting pin was broken , Sun Imports(son of a bitch imports

)Aussie LM importer sent this replacement . It has been my EDC for the last 5mnths since my Citizen Kinetic watch packed up.
http://i291.photobucket.com/albums/ll287/multimat426/multitools/7ef60d1d.jpg[/img]]

http://i291.photobucket.com/albums/ll287/multimat426/multitools/564732f3.jpg[/img]]

http://i291.photobucket.com/albums/ll287/multimat426/multitools/dd1e0a21.jpg[/img]]

Made in Japan
http://i291.photobucket.com/albums/ll287/multimat426/multitools/e2a9331d.jpg[/img]]

http://i291.photobucket.com/albums/ll287/multimat426/multitools/be09ce06.jpg[/img]]

Shows the rubber coating ware to reveal brass colored metal

. The red button is for the light.

http://i291.photobucket.com/albums/ll287/multimat426/multitools/934090ff.jpg[/img]]

And then there was light

http://i291.photobucket.com/albums/ll287/multimat426/multitools/e60ca766.jpg[/img]]

My youngest son reckons the hands look like LM blades

. The hands look like they should glow in the dark but they do not. Using the light you can see the time though. The watch has fallen out of my scrubs pocket a couple of times at work & not shown any probs. Seems to be solid but not bullet proof. Ok silly question ,the rotating numbered collar on watch face , what is it for

.

hawkchucker · **Reply #19 on:** December 13, 2008, 01:54:04 AM

I actually like that! i would love to find one here.

Poncho65 · **Reply #20 on:** December 13, 2008, 02:08:42 AM

The hands on my watch do glow in the dark

Mine is exactly like that but I took off the rings from the top when I got it (they got in my way)

I think the moving dial is to be used in conjunction with the compass on it or something

hawkchucker · **Reply #21 on:** December 13, 2008, 02:10:12 AM

The bezel is used to count the min hand sweep. You put the point on the min hand and it counts the mins. Mostly used diving.

MultiMat · **Reply #22 on:** December 13, 2008, 02:17:11 AM

Quote from: hawkchucker on December 13, 2008, 02:10:12 AM

The bezel is used to count the min hand sweep. You put the point on the min hand and it counts the mins. Mostly used diving.

Thanks HC

hawkchucker · **Reply #23 on:** December 13, 2008, 02:34:27 AM

No problem

RaptorMan · **Reply #24 on:** December 13, 2008, 03:11:47 AM

I like it!!!!!!!

Leatherman123 · **Reply #25 on:** December 13, 2008, 06:29:10 PM

Raptor, I haven't been able to look for it. I have no power at my house, and a bunch of trees split in my front yard.. I am at the in laws, and I will look when I get back. Oh, and I have the same watch as MM. But, as I said, mine came with a Blast.

RaptorMan · **Reply #26 on:** December 14, 2008, 12:05:42 AM

Thats ok take your time. I hope the power comes back soon!!

Leatherman123 · **Reply #27 on:** December 14, 2008, 12:08:07 AM

I do too! I am staying at the in laws.. The worst part is that I have SO much stuff in the mail for me! Like a Vic Fireman, Streamlight Stylus Pro, Spyderco Endura 4, and a few other things..

Hello Lurker! Remove this ad and much more by logging in.

Leatherman clip watch

Donations

Community Links