For real this time, Cronies in the next few months!

DoughDTD · **on:** October 25, 2009, 04:37:10 PM

Hey guys!

Great news!!!! I finally landed myself a real full time job in my field (Mechanical/Manufacturing Engineering) and will have a serious flow of cash into my bank account. I will also be moving into a house where I can set up my full shop. What this means to you guys is that I will most probably have the time/money to FINALLY get my crony produced. I am going to try several different versions, and like I posted earlier might try a couple changes or adding in a gut hook, but I'm just trying to gauge curiosity or interest in the initial run as it stood with the passaround prototypes. Thanks alot guys!

-Dough

AHB · **Reply #1 on:** October 25, 2009, 04:46:19 PM

And a Crony is ___________.?

(Fill in the blank with a picture)

Thanks..

Flash · **Reply #2 on:** October 25, 2009, 04:56:43 PM

Dude,

Put me down for at least 1

Gadget Guy · **Reply #3 on:** October 25, 2009, 05:08:39 PM

Me too!

Neil · **Reply #4 on:** October 25, 2009, 05:11:42 PM

Good news on the job Dough.

Yeah, I'll scrape up some pennies for one

Precise · **Reply #5 on:** October 25, 2009, 05:17:57 PM

Awesome! I want one! That's exactly what I need.

Benner · **Reply #6 on:** October 25, 2009, 05:43:04 PM

I'd be interested, but not in a gut hook one.

Freudian Frog · **Reply #7 on:** October 25, 2009, 05:51:56 PM

Where's my believer discount?

I'll try to scrape something up. =(

Sazabi · **Reply #8 on:** October 26, 2009, 12:21:42 AM

Put me down for one, too.

Mr. Whippy · **Reply #9 on:** October 26, 2009, 12:29:16 AM

In.

(don't wanna be too wordy)

Bowman1911 · **Reply #10 on:** October 26, 2009, 01:22:20 AM

Definitely interested. Still kinda a noob here, but weren't there plans for a magnifying glass on these?

MultiMat · **Reply #11 on:** October 26, 2009, 01:40:27 AM

Well done on the job front Doughman

.

I am a probably yes

You will have to post pics of your work shop when you have set it up

Grant Lamontagne · **Reply #12 on:** October 26, 2009, 02:04:45 AM

If the first one off the line does not have my name on it, I will consider this a huge slap in the face to the community here that went to so much effort to help you develop it.

I love being able to pull rank and make people feel guilty!

Def

Mr. Whippy · **Reply #13 on:** October 26, 2009, 02:10:04 AM

If the first one off the line doesn't have my name on it, I'm going to consider it a huge slap in Grant's face.

DoughDTD · **Reply #14 on:** October 26, 2009, 03:35:23 AM

Well I'm going to try to get the scales and logo laser etched, so I am going to go ahead and make a special edition 1st run for multitool.org

- I might even be able to take custom orders to put peoples names on them as well. Glad theres still interest, im very pumped for this!!

-Dough

J-sews · **Reply #15 on:** October 26, 2009, 03:39:40 AM

Congrats on the job news Dough!

Benner · **Reply #16 on:** October 26, 2009, 05:45:49 PM

Like previously asked, will it have the mag in it?

Zack · **Reply #17 on:** October 26, 2009, 08:57:07 PM

I'm in for at least one.

SteveRacer · **Reply #18 on:** October 26, 2009, 11:06:04 PM

I'm in with the magnifier.

Freudian Frog · **Reply #19 on:** October 26, 2009, 11:09:22 PM

You should take discounted pre-order!

Not plural, 'cause only I should get it.

Tinnie · **Reply #20 on:** October 27, 2009, 09:37:29 AM

I would get one

sardauker · **Reply #21 on:** October 27, 2009, 09:47:28 AM

...accordingly shipping costs... +1

DaveK · **Reply #22 on:** October 27, 2009, 10:37:28 AM

I'm in.

Paul · **Reply #23 on:** October 27, 2009, 10:27:14 PM

looks good...I'd 'ave one if the price is OK

Chako · **Reply #24 on:** October 28, 2009, 12:05:37 PM

I am not a big fan of these type of devices, but if you are going to engrave Multitool.org on it, then count me in as a definite.

Nikos · **Reply #25 on:** October 28, 2009, 07:38:09 PM

Quote from: Benner on October 25, 2009, 05:43:04 PM

I'd be interested, but not in a gut hook one.

What he said!

thebullfrog · **Reply #26 on:** October 28, 2009, 10:26:04 PM

I put myself down for a Probably Yes. It'll depend on the final specs/design and the cost, but as it stands now I am VERY interested. I'd personally rather not have the mag glass, but no biggie either way. Looks like a great tool. My biggest concern is that I'd want the wrench to be more of an aligator/universal design than a graduated one. I suppose you may get less strength/grip from the alligator, but I'd rather it not be so limited in what I can use it on. I'd actually rather replace the pry bar deal with another wrench (SAE/metric) but that's just me. Overall I think it really does look like a great and well thought out device and wouldn't at all mind owning one. (oh, and one more "/" just for good measure)

John · **Reply #27 on:** December 06, 2009, 03:33:24 PM

So howz this project moving along?

ecfiffer · **Reply #28 on:** December 06, 2009, 08:26:57 PM

well my son has been asking for a multi-tool. this would be a good way to start him out!!!!

dwgfan91 · **Reply #29 on:** December 08, 2009, 02:26:34 AM

I know i'm a noob here, but i'd love to have one of these. How much would it cost?

Hello Lurker! Remove this ad and much more by logging in.

For real this time, Cronies in the next few months!

Poll

Would you want to get one at the 30-50 dollar price range?

Flash

Donations

Community Links