[Ask for Mod] Bits Driver adapter for NON Leatherman!

posceve · **on:** February 29, 2012, 09:44:24 PM

Hi guys all, i have this multitool, im searching for a BITS DRIVER MOD,

something like that one for Leatherman, do not know if there is already something in this forum,
Maybe i can do some modification on this tool?

http://www.ausoniatools.com/resources/25052.jpg?page=Y

http://dl.dropbox.com/u/2131062/IMG_20120228_203058.jpg

Thank u in advance!!!!

nuphoria · **Reply #1 on:** February 29, 2012, 09:53:37 PM

Do you mean you want to add an adapter to hold bits to the flat screwdriver bit shown in your pic?

posceve · **Reply #2 on:** February 29, 2012, 10:00:39 PM

Yes!!!! Like that one seen for Leatherman, i know socket its different, but not impossible!?!!?! N0???

posceve · **Reply #3 on:** February 29, 2012, 10:38:11 PM

I found this topic, maybe help, but i cant understand the Holder modification

http://forum.multitool.org/index.php/topic,28976.msg498481.html#msg498481

nuphoria · **Reply #4 on:** February 29, 2012, 11:24:57 PM

I think it's possible to take an existing bit holder and use something like Sugru or metal putty to make it fit your tool. Haven't done it myself, but it seems like a fairly easy thing to do with the right materials.

posceve · **Reply #5 on:** February 29, 2012, 11:43:52 PM

Thank you Nuphoria fpr quick respons, but my english is poor. I cant understand techincal term.

Do you know a visual tutorial?

Sparky415 · **Reply #6 on:** March 01, 2012, 12:23:38 AM

Quote from: nuphoria on February 29, 2012, 11:24:57 PM

I think it's possible to take an existing bit holder and use something like Sugru or metal putty to make it fit your tool. Haven't done it myself, but it seems like a fairly easy thing to do with the right materials.

Quote from: posceve on February 29, 2012, 11:43:52 PM

Thank you Nuphoria fpr quick respons, but my english is poor. I cant understand techincal term.

Do you know a visual tutorial?

Is this any help?

Add some

$:-\$

nuphoria · **Reply #7 on:** March 01, 2012, 04:00:45 AM

That's cool Tony!

He's right, get some JB weld if you can. Use it to fill the end of the adapter and mould the shape you want in it.

Also, we have lots of international members here - maybe one of them can help with the language issues. What do you speak?

posceve · **Reply #8 on:** March 01, 2012, 12:23:20 PM

Thank u Sparky and Neuphoria!, im Italian, now i'm trying to figure out a similar product here, maybe is this: http://www.saratoga.it/ita/products_detail.asp?iProvenienza=2&IdProdotto={A1ED9A5C-59F7-4C1B-9CA2-E7A60EE67FAD}

-after that i fill the holder, how can i shape the space for joint the tool??? maybe i must fill the hole with the tool inserted??? But after tool gets stuck?

Sorry im noob

Sparky415 · **Reply #9 on:** March 01, 2012, 02:52:08 PM

Quote from: posceve on March 01, 2012, 12:23:20 PM

Thank u Sparky and Neuphoria!, im Italian, now i'm trying to figure out a similar product here, maybe is this: http://www.saratoga.it/ita/products_detail.asp?iProvenienza=2&IdProdotto={A1ED9A5C-59F7-4C1B-9CA2-E7A60EE67FAD}

-after that i fill the holder, how can i shape the space for joint the tool??? maybe i must fill the hole with the tool inserted??? But after tool gets stuck?

Sorry im noob

Firstly Welcome

I have never done this so I am making it up as I go along

That looks like the right glue

Your picture is right

I would try covering the tool with ‘cling film’ or ‘seran wrap’ then push it in the end of the ‘bit holder’

Did that make any sense?

posceve · **Reply #10 on:** March 01, 2012, 03:12:51 PM

Thank u for welcome and help sparky415!!! I think about covering tool with seran, i that way, i put thick, perhaps the hole should be slightly narrower or the tool does not get stuck in the seat...no??

Sparky415 · **Reply #11 on:** March 01, 2012, 06:03:44 PM

If I understand

I would put just one layer of seran on the tool, then it should be a good fit

posceve · **Reply #12 on:** March 01, 2012, 06:25:40 PM

Ok, now I have to try let me buy weld or something similar.
question: there is a way to create more friction between the tool and the bits holder?

posceve · **Reply #13 on:** March 01, 2012, 09:11:37 PM

I try to pull out the back piece of bits holder, but its too hard!!! its welded?

?

Sparky415 · **Reply #14 on:** March 01, 2012, 09:16:48 PM

Did you try holding it in a vice and hammer a nail through from the inside?

Protective glasses

posceve · **Reply #15 on:** March 01, 2012, 09:42:15 PM

Not in a vice....with hammer but upper part it closed....sigh

Sparky415 · **Reply #16 on:** March 01, 2012, 09:53:05 PM

Bigger hammer

posceve · **Reply #17 on:** March 02, 2012, 11:54:30 AM

Im not so lucky in this project.....stopped at start....

posceve · **Reply #18 on:** March 02, 2012, 05:57:14 PM

Quote from: posceve on March 02, 2012, 11:54:30 AM

Im not so lucky in this project.....stopped at start....

YEEEEEEEEE ITS WORK!!!!!!
Now im at work but later i can go buy weld!!!!! Im excited like a young jedi!!!!!

Sparky415 · **Reply #19 on:** March 02, 2012, 08:32:26 PM

Quote from: posceve on March 02, 2012, 05:57:14 PM

Quote from: posceve on March 02, 2012, 11:54:30 AM
Im not so lucky in this project.....stopped at start....

YEEEEEEEEE ITS WORK!!!!!!
Now im at work but later i can go buy weld!!!!! Im excited like a young jedi!!!!!

Very good, young padawan, but you still have much to learn

posceve · **Reply #20 on:** March 03, 2012, 02:35:17 PM

I came back with good news, my father, he made up this change, i do not know what is, the piece of brass! He suggest maybe a piece of little electric engine....
Step:
-Glued the piece of brass with bits holder
-to fill empty space inside the brass insert, he put two metal strips and glued with epox.
Was a combination of luck and skill (not mine) from my father!!!!
Im here for a question Thank u all