The tool you'd miss the least...

[Mike, Lord of the Spammers!]

...if they took it off a multitool

This was a tough one for me, and I really can't think of a tool I'd willingly loose

I guess thats why I love Swisstool's as they pack the most amount of features in to there tools

Ok so I guess I failed my own question, so can you guys do any better

[Benner]

No question for me, the saw.  I have never used one on a Multi and I doubt I ever will.  It's just not a tool I never feel I require.

[Mike, Lord of the Spammers!]

That might change after we turn you into a hardcore bushcrafter/camper though

[I'm Still Bison]

 I can live without a bottle or can opener on a multi.If I feel the need for either,the ones onboard a SAk do the job very well.

[Benner]

That might change after we turn you into a hardcore bushcrafter/camper though

You never know!

I was actually quite disappointed this wasn't a "The multitool you'd miss the least" thread.  

[Mike, Lord of the Spammers!]

I can live without a bottle or can opener on a multi.If I feel the need for either,the ones onboard a SAk do the job very well.

I was going to go with the cap lifter, until I remembered all the other tool's that are usually grafted onto it

[Mike, Lord of the Spammers!]

That might change after we turn you into a hardcore bushcrafter/camper though

You never know!

I was actually quite disappointed this wasn't a "The multitool you'd miss the least" thread. 

Maybe you should start one then

[Benner]

That might change after we turn you into a hardcore bushcrafter/camper though

You never know!

I was actually quite disappointed this wasn't a "The multitool you'd miss the least" thread. 

Maybe you should start one then

Probably best that we don't. 

[Mike, Lord of the Spammers!]

I dunno, I think it could quickly degenerate into open warfare, but it might be fun along the way

[Benner]

My mum always said "If you can't say anything nice, don't say anything at all." 

[Mike, Lord of the Spammers!]

My mum always said "If you can't say anything nice, don't say anything at all." 

Where's the fun in that

Ok back on topic gentleman

[Benner]

My mum always said "If you can't say anything nice, don't say anything at all." 

Where's the fun in that

Ok back on topic gentleman

Sorry, my bad! 

I wouldn't be without a bottle opener on anything.  Use them all frequently.

[Roadie]

Corkscrew! Can't say i've ever used one on a multitool.

[Benner]

Corkscrew! Can't say i've ever used one on a multitool.

Can't say I even have on on a MT.  Used it on my Swisschamp though. 

[hawkchucker]

I could loose one of the 37 flathead screwdrivers that seem to be on all the tools now.

[Mike, Lord of the Spammers!]

There is that, but I was viewing the screwdrivers as a whole entity, loose one, ya loose em all

[hawkchucker]

Well than I would not loose anythign. I use the awls, I use the bottleopeners and the can openers. If I had to i guess it would be the Straite edge blade. I allways have another sharp on me anyway, and I only carry the SE and leave the serr. in my tool.

[Mike, Lord of the Spammers!]

Well than I would not loose anythign. I use the awls, I use the bottleopeners and the can openers. If I had to i guess it would be the Straite edge blade. I allways have another sharp on me anyway, and I only carry the SE and leave the serr. in my tool.

Hmm sacrifice a blade , even though I would need it, I'm still not sure I could loose any blade in preference to almost any other tool

[hawkchucker]

But you have the other blade in the tool. Most my tools have the serr. So I could dump the strait edge.

[Mike, Lord of the Spammers!]

True, but I have an un-natural attachment to blades 

[GMArthur]

V-Cutter and 1/4 inch drive on SOG.
Bit Drivers on Leatherman.
I don't have a use for any of these and if they went away forever I wouldn't miss them.

[Mike, Lord of the Spammers!]

Bit Drivers on Leatherman.
I don't have a use for any of these and if they went away forever I wouldn't miss them.

I agree with you there, my charge has got two of the buggers , I'd happily loose one for something a bit more useful, like an awl

[ducktapehero]

On my Spirit I could give the small flat screwdriver. I just don't use it very much. Maybe the file. On my Farmer, touch it and I'll whack you with my cane.

[Mike, Lord of the Spammers!]

On my Spirit I could give the small flat screwdriver. I just don't use it very much. Maybe the file. On my Farmer, touch it and I'll whack you with my cane.

Ah, unnatrully protective of you farmer are we, you are on the true path my son

[ducktapehero]

Ah, unnatrully protective of you farmer are we,

I don't see anything unnatural about it. 

[Mike, Lord of the Spammers!]

Ah, unnatrully protective of you farmer are we,

I don't see anything unnatural about it. 

Your doing good mate, I really feel protective off mine, much more so than MT costing 3 times as much

[Biru]

I agree that bit drivers aren't a big priority for me personally, but I could definitely lose the bottle cap lifter. I DO like the can openers, though. The saw is so important to me that I ordered and put one on each of my Bear jaws not so equipped.

[Spoonrobot]

The serrated blade.

It does the same function as the main blade but usually takes up room that could be better used by an implement serving a different function like a saw/file.

[Leatherman123]

I could lose the chisels found on the SwissTools! I have never used that part of the implement once! But, I must add that I have used every single function on my SURGE! I find that it works best when you tie some paracord on the lanyard ring and throw it over a branch!!!

[J-sews]

I must admit to never having used a multitool corkscrew in my entire life, at least not for pulling a cork. There are auxiliary uses for a corkscrew - picking at knots, or holding the little Vic eyeglass screwdrivers - but none of those uses justifies the big bulging size of a corkscrew on a SAK or multitool IMO.