can i remove the knife on the MUT??

[kareem]

hi there, so i want to know is it possible to remove the knife on the leatherman MUT
i meanly want to use the pliers and hammer, no need for the knives & saw(which are illegal to carry here)


so is it possibel, and if it is , can i do it alone or do i need special tools?


thanks in advance for those who help

[Nhoj]

A military tool with no blade?! Be careful, that pointy brass scraper also looks... well pointy. I don't think any hard to obtain tools are needed but I haven't ever handled a MUT so wait until someone who has one comes in here.

[Metropolicity]

hi there, so i want to know is it possible to remove the knife on the leatherman MUT
i meanly want to use the pliers and hammer, no need for the knives & saw(which are illegal to carry here)


so is it possibel, and if it is , can i do it alone or do i need special tools?


thanks in advance for those who help

You will need a pair of Security Torx T10 bits. Heat up the screws with a torch or soldering iron first to loosen the loctite threadlocker inside. You will need some washers to take up the spacer again.

The pivot size is 7/32" so your washers will have to be at least that big.

[kareem]

thank you for your reply
unfortunatily such tools are not an option

so i prefer not to buy a MUT in the first place

[mtool78]

That Torx-bit costs about...nothing? At least when compared to price of MUT. 

[Metropolicity]

thank you for your reply
unfortunatily such tools are not an option

so i prefer not to buy a MUT in the first place

The why ask the question? Odd.

Anyways, good luck finding a hammer on a tool that doesn't suck.