Need help for 91mm

[kahyja]

First time dismantling a 91mm Sak... I have a 2005+ Huntsman and I'm trying to build a 2layer with the saw, cap lifter(I prefer this tool to the combo), awl and blade.

Can I put the main blade opposite to the cap lifter,how? If not, how can I swap the can opener with the small blade so that it work correctly?

Thanks

Edit: I must specify backside awl

[tattoosteve99]

It might be possible if you use 2 springs and spacers on each side of the tools.

[kahyja]

It might be possible if you use 2 springs and spacers on each side of the tools.

Do you mean 2 springs for one tool layer??

I just realize the main blade/caplifter were on the same layer on a old Voyager, just like the way I want...how they done that??

[Syph007]

The blade on those old ones has a more severe bend in them to make room for the cap lifter.

[tattoosteve99]

It might be possible if you use 2 springs and spacers on each side of the tools.

Do you mean 2 springs for one tool layer??

I just realize the main blade/caplifter were on the same layer on a old Voyager, just like the way I want...how they done that??
(Image removed from quote.)

That one is also a 84mm. I'll look in my parts bin and see if I can come up with something . If it can be done I will let you know

[kahyja]

The blade on those old ones has a more severe bend in them to make room for the cap lifter.

So I could try bending the blade a little and benefit of the smaller tang 2005+ by adding a spacer at the right place?? Also put a spacer on the cap lifter side to fit the main blade spring thickness....

[/quote]
That one is also a 84mm. I'll look in my parts bin and see if I can come up with something . If it can be done I will let you know
[/quote]
That would be nice, thanks!! I also have an 84mm fire steel waiting to find a home....