Alox scales

[BleaKrytE]

You guys think it's possible to get some alox scales to fit on a super tinker? or maybe brass, copper?
I know I said I don't really like them, but they ain't so bad, specially the black and grey (not silver) ones hahah

[Sazabi]

That would require a lot of work to fit; the scales are 2mm longer than the Super Tinker frame, and the tool pivots are a couple millimeters larger, too.  There was the Coast knockoffs, though, which were 91mm, if I remember correctly, which may work with less effort.

I believe SwissBianco has made 91mm copper scales, though, that are glued on.

[LeaF]

I believe SwissBianco has made 91mm copper scales, though, that are glued on.

Yes, you're right, the result of placing copper scales to the 91mm model you can see here:
http://knifeclub.com.ua/forum/viewtopic.php?f=89&t=48073
The article written in Ukrainian, so if you need some translation - please ask me.
Shortly: one guy (from Ukraine) ordered these scales and put them to the Fieldmaster instead of old used ones, but without glue!

[magentus]

OR you could check out one of our very own super modders: http://forum.multitool.org/index.php/topic,34772.msg1367001.html#new - the page linked has some brass scales for a Super-Tinker made by our very own Syph007

Check out the entire thread for some great work.

[Fortytwo]

Just an idea, how well placed are the pins on a Cadet? Would it be at all possible to get a Cadet and an 84mm Super tinker/Climber+Screwdriver  and cut out the space for the screwdriver?