Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
+-

Hello Lurker! Remove this ad by logging in.


The PST 1.5.1 adding the saw 737

Global Moderator Absolute Zombie Club Posts: 36,899
The PST 1.5.1 adding the saw
« on: March 15, 2017, 08:30:18 PM »
Well I have carried my PST 1.5 lately and finally made myself go and cut a SOG saw to fit into my PST :D

I have had it marked to cut for months :whistle:

20170315_115117 by Poncho 65, on Flickr

Compared to a couple other PST/PST II parts to see what needed to be cut away for sure :tu:

20170315_115320 by Poncho 65, on Flickr

I cut the back off and then went to making the pivot end match the factory PST end of this blade :tu:

20170315_122052 by Poncho 65, on Flickr

20170315_122103 by Poncho 65, on Flickr

20170315_122037 by Poncho 65, on Flickr

Next I took a diamond stone and a sanding block to clean it up and make the finish a bit smoother and more eye pleasing :D

20170315_122800 by Poncho 65, on Flickr

Next into the PST and see if it fits :think: Yep looks pretty good :tu: Now I mark the nail nick position with a Sharpie :cheers:

20170315_123359 by Poncho 65, on Flickr

Cut the nail nick in :tu:

20170315_123543 by Poncho 65, on Flickr

Now to see if it can cut :cheers:

20170315_124314 by Poncho 65, on Flickr

Tested and works :dd: Now to see the finished PST 1.5.1 :woohoo:

20170315_124037 by Poncho 65, on Flickr

And a comparison to the Rebar and it's saw :cheers:

20170315_124158 by Poncho 65, on Flickr
« Last Edit: March 16, 2017, 02:46:02 AM by Poncho65 »



Absolute Zombie Club Posts: 20,337
Re: The PST 1.5.1 adding the saw
« Reply #1 on: March 15, 2017, 11:32:07 PM »
Great job Poncho  :like: :cheers: :tu:
Full Member Posts: 234
Re: The PST 1.5.1 adding the saw
« Reply #2 on: March 15, 2017, 11:41:23 PM »
Nice  :tu:

Leatherman: ALX/SLV/TTI, Core, Crunch, Flair, C2/CS4/KF4/PRO/S2/SC2/SX/XE6, Kick, Micra, Mini, MUT, OHT, PS4, PST 1/2, Pulse, Rebar, Sideclip, Signal, Skeletool CX/RX, ST 200/300/EOD, Surge, Tread, Wave

Gerber: Balance, Bear ST, Cable Dawg, Center Drive, Crucial, Diesel, Dime, Flick, Grappler, Groundbreaker, MP 1/400/600/650/700/800, MPT, Radius, Recoil, Steady

SOG: Paratool, Power Assist/Duo/Grab/Lock/Play/Plier, PPP, PT 525/540, Reactor, Switchplier 1/2

Victorinox: Autotool, RT, ST, Spirit, Buku SAKs
Global Moderator Absolute Zombie Club Posts: 31,657
Re: The PST 1.5.1 adding the saw
« Reply #3 on: March 15, 2017, 11:46:10 PM »
Way to go Mr Poncho!   :tu:   :like:
Global Moderator Absolute Zombie Club Posts: 36,899
Re: The PST 1.5.1 adding the saw
« Reply #4 on: March 15, 2017, 11:51:05 PM »
Thanks guys  :tu: I am going to try and carry it for a bit and see how it goes :cheers:

Absolute Zombie Club Posts: 22,524 Wooooo!
Re: The PST 1.5.1 adding the saw
« Reply #5 on: March 16, 2017, 01:20:53 AM »
Nicely done Poncho :tu:

Sent from my SM-G920R4 using Tapatalk


K-Tibbs
No Life Club Posts: 1,370
Re: The PST 1.5.1 adding the saw
« Reply #6 on: March 16, 2017, 02:19:29 AM »
Nice job!   That's something I want to do, but I haven't found a busted PST or PST II to do it to.  My PST II still works fine, and I see no reason to mess with it.   I'm thinking about trading an intact PST for a friend's which has had one of the plier pivots disappear (which was replaced with a nut and bolt).
Global Moderator Absolute Zombie Club Posts: 36,899
Re: The PST 1.5.1 adding the saw
« Reply #7 on: March 16, 2017, 02:44:42 AM »
What started this was that I bid on a PST II and got it for cheap but the handles were messed up ::) and I also had a PST that I didn't care to take apart with a couple issues ;) :D

It is a very great EDC anyways and now it is more so with the saw :dd: Not really much else that I would need on it :think: Especially since I carry a SAK anyways :tu:

Global Moderator Absolute Zombie Club Posts: 36,899
Re: The PST 1.5.1 adding the saw
« Reply #8 on: March 16, 2017, 02:44:55 AM »
Nicely done Poncho :tu:

Sent from my SM-G920R4 using Tapatalk

:hatsoff:

Global Moderator Absolute Zombie Club Posts: 36,899
Re: The PST 1.5.1 adding the saw
« Reply #9 on: March 16, 2017, 02:57:21 AM »
Guess I could include the original thread were I started with this PST :think:

http://forum.multitool.or...ex.php/topic,65702.0.html

Pietervn also did this mod a couple years ago and had I noticed his I wouldn't have had to cut the back off of mine :whistle: Guess I should have cut the pivot part first then tried it :facepalm: :rofl: Well I have another so I may give it another go :shrug:

http://forum.multitool.or...ex.php/topic,48498.0.html

Thread Killer 2017 No Life Club Posts: 2,996 Born to multitask.
Re: The PST 1.5.1 adding the saw
« Reply #10 on: March 16, 2017, 07:11:07 PM »
10/10  :tu:
How about a  :ahhh :ahhh :ahhh!!! MINI !!!  :ahhh :ahhh :ahhh saw?  :D
Absolutely No Life Club Posts: 18,398

Zed gb

******* *
Re: The PST 1.5.1 adding the saw
« Reply #11 on: March 16, 2017, 08:01:53 PM »
Cool mod  :salute:

My edc
MT,  Yes
Sak, Yes
Slipjoint, Yes
Flashlight,Yes
Watch, Yes
Other stuff ,Yes
Global Moderator Absolute Zombie Club Posts: 36,899
Re: The PST 1.5.1 adding the saw
« Reply #12 on: March 16, 2017, 08:53:04 PM »
:ahhh :ahhh :ahhh !!!MINI!!! :ahhh :ahhh :ahhh With a saw :dd: Now that is a great idea :D Not much you might be able to cut with it though  :think: :rofl:

Global Moderator Absolute Zombie Club Posts: 36,899
Re: The PST 1.5.1 adding the saw
« Reply #13 on: March 16, 2017, 08:53:55 PM »

Global Moderator Absolute Zombie Club Posts: 31,657
Re: The PST 1.5.1 adding the saw
« Reply #14 on: March 16, 2017, 08:54:32 PM »
:ahhh :ahhh :ahhh !!!MINI!!! :ahhh :ahhh :ahhh With a saw :dd: Now that is a great idea :D Not much you might be able to cut with it though  :think: :rofl:

Stop making excuses and get it done!   :pok:
Global Moderator Absolute Zombie Club Posts: 36,899
Re: The PST 1.5.1 adding the saw
« Reply #15 on: March 16, 2017, 09:03:45 PM »
:ahhh :ahhh :ahhh !!!MINI!!! :ahhh :ahhh :ahhh With a saw :dd: Now that is a great idea :D Not much you might be able to cut with it though  :think: :rofl:

Stop making excuses and get it done!   :pok:

Nearly have to be foldable to be able to cut anything :think: that or an inch and a half saw :ahhh :ahhh :ahhh :rofl:

Global Moderator Absolute Zombie Club Posts: 31,657
Re: The PST 1.5.1 adding the saw
« Reply #16 on: March 16, 2017, 09:06:56 PM »
:ahhh :ahhh :ahhh !!!MINI!!! :ahhh :ahhh :ahhh With a saw :dd: Now that is a great idea :D Not much you might be able to cut with it though  :think: :rofl:

Stop making excuses and get it done!   :pok:

Nearly have to be foldable to be able to cut anything :think: that or an inch and a half saw :ahhh :ahhh :ahhh :rofl:

It would still be cool.   :D
Global Moderator Absolute Zombie Club Posts: 31,657
Re: The PST 1.5.1 adding the saw
« Reply #17 on: March 16, 2017, 09:09:39 PM »
You ever see the little blades I made for the Core?
Global Moderator Absolute Zombie Club Posts: 31,657
Re: The PST 1.5.1 adding the saw
« Reply #18 on: March 16, 2017, 09:43:24 PM »
Found a pic.

Global Moderator Absolute Zombie Club Posts: 36,899
Re: The PST 1.5.1 adding the saw
« Reply #19 on: March 17, 2017, 02:21:48 AM »
I had not seen those :o:like: them and they would both fit into the  :ahhh :ahhh :ahhh !!!MINI!!! :ahhh :ahhh :ahhh :D

Very cool 8) Thanks for the pic :tu:
« Last Edit: March 17, 2017, 02:23:32 AM by Poncho65 »

Global Moderator Absolute Zombie Club Posts: 31,657
Re: The PST 1.5.1 adding the saw
« Reply #20 on: March 17, 2017, 04:38:58 AM »
Don't know if they would fit, my mini went years ago.
Hero Member Posts: 954
Re: The PST 1.5.1 adding the saw
« Reply #21 on: March 18, 2017, 08:30:32 AM »
Guess I could include the original thread were I started with this PST :think:

http://forum.multitool.or...ex.php/topic,65702.0.html

Pietervn also did this mod a couple years ago and had I noticed his I wouldn't have had to cut the back off of mine :whistle: Guess I should have cut the pivot part first then tried it :facepalm: :rofl: Well I have another so I may give it another go :shrug:

http://forum.multitool.or...ex.php/topic,48498.0.html

Nice mod, a saw seems to be lacking in the PST range. I like the shape you made it, I think Mr Harley will have something to say about the decapitation.  :D

If you do another, do the bottom bit first, that will show you how much needs to be taken off the top.

Cheers,

Pete
Global Moderator Absolute Zombie Club Posts: 36,899
Re: The PST 1.5.1 adding the saw
« Reply #22 on: March 19, 2017, 12:41:45 AM »
Guess I could include the original thread were I started with this PST :think:

http://forum.multitool.or...ex.php/topic,65702.0.html

Pietervn also did this mod a couple years ago and had I noticed his I wouldn't have had to cut the back off of mine :whistle: Guess I should have cut the pivot part first then tried it :facepalm: :rofl: Well I have another so I may give it another go :shrug:

http://forum.multitool.or...ex.php/topic,48498.0.html

Nice mod, a saw seems to be lacking in the PST range. I like the shape you made it, I think Mr Harley will have something to say about the decapitation.  :D

If you do another, do the bottom bit first, that will show you how much needs to be taken off the top.

Cheers,

Pete

Thanks Peter :salute: Most definitely will do the pivot end first and then check for fit :D

No Life Club Posts: 3,381 Nothing's typical around here
Re: The PST 1.5.1 adding the saw
« Reply #23 on: March 21, 2017, 08:34:26 PM »
Nice mod Poncho!

Laughter is the best Medicine
Slaughter is just Laughter with an "S"

We are looking for Multitool Encyclopedia Editors! If you are interested, please give me a PM!

The Multitool Encyclopedia Editing for Dummies Page: http://forum.multitool.or...ex.php/topic,65751.0.html
Multitool Encyclopedia Suggested Edits Page: http://forum.multitool.or...ex.php/topic,65746.0.html
Absolutely No Life Club Posts: 5,932 Cats have pocket knives of their own
Re: The PST 1.5.1 adding the saw
« Reply #24 on: March 21, 2017, 08:49:18 PM »
Yup  :multi:

Omnia vincit amor. Vae victis.
Global Moderator Absolute Zombie Club Posts: 36,899
Re: The PST 1.5.1 adding the saw
« Reply #25 on: March 21, 2017, 09:19:19 PM »
Thanks guys :hatsoff: I am very happy to have the saw in such a slim package as the PST :cheers: :like:

Global Moderator Absolute Zombie Club Posts: 36,899
Re: The PST 1.5.1 adding the saw
« Reply #26 on: April 03, 2017, 04:36:20 AM »
Well I cut another saw for this MT ::) :D I was cutting another for my MP600 in this thread https://forum.multitool.o...ex.php/topic,71276.0.html and decided to go ahead and cut both at the same time :cheers:

20170402_194103 by Poncho 65, on Flickr

I haven't installed it yet but when I do I will take pics ;) :D

Absolute Zombie Club Posts: 20,337
Re: The PST 1.5.1 adding the saw
« Reply #27 on: April 03, 2017, 05:47:34 AM »
I like the narrower version better myself, less drag when cutting  :tu:
Global Moderator Absolute Zombie Club Posts: 31,657
Re: The PST 1.5.1 adding the saw
« Reply #28 on: April 03, 2017, 05:59:59 AM »
I like the narrower version better myself, less drag when cutting  :tu:

And it looks more like the Core saw which is cool.
Global Moderator Absolute Zombie Club Posts: 31,657
Re: The PST 1.5.1 adding the saw
« Reply #29 on: April 03, 2017, 06:00:49 AM »
You really need to install it so we can judge it.   :)

 

Operational Funds

Keep the Unworkable working! Donate with PayPal!
November Goal: $275.00
Due Date: Nov 30
Total Receipts: $372.43
PayPal Fees: $22.89
Net Balance: $349.54
Above Goal: $74.54
Site Currency: USD
127% 
November Donations

Community Links

Powered by EzPortal
© 2017 Defender Web & Tool