Multitool.org
 
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
+-

Hello Lurker! Remove this ad and much more by logging in.


[CLOSED] Brass rod for SAK modding 5308

Admin Team Absolutely No Life Club Posts: 6,947 I brake for cake
[CLOSED] Brass rod for SAK modding
« on: March 06, 2018, 02:30:19 PM »
Looking for small quantities of brass rod for SAK mods?  I have the following kits available

Victorinox 84mm kit £3.50
Contents: 4 x 2.2 mm rods (same diameter for all rivets)

Victorinox 91mm kit £3.00
Contents: 2 x 2.5 mm (end pivots) and 2 x 2.2 mm (back tools and 4th pin)

Victorinox 93mm kit £2.50
Contents: 2 x 3.0 mm (end pivots), 1 x 2.5 mm (centre pin)

Each rod in the kits is 165 mm (6 1/2") long for ease of posting.  You'll get 4 or maybe 5 finished pins out of each rod, depending on the total number of layers.

[Edit 19/03/18: I underestimated the weight of the envelopes ::) so I'll have to change the prices slightly.]

[Edit 06/09/18: Brass has gone up so prices have increased a little more]

First class untracked postage costs for up to 2 kits as follows:
UK £1.50
Europe £3.00
Rest of world £4.00

First class untracked postage costs for 3 or more kits as follows:
UK £2.00
Europe £4.50
Rest of world £5.50

Payment by PayPal only please - all prices include fees.
« Last Edit: July 02, 2019, 10:12:13 AM by zoidberg »
Global Moderator Point Of No Return Posts: 39,689
Re: Brass rod for SAK modding
« Reply #1 on: March 06, 2018, 04:00:00 PM »
 :like: :tu:
Global Moderator Absolutely No Life Club Posts: 7,142
Re: Brass rod for SAK modding
« Reply #2 on: March 06, 2018, 04:11:32 PM »
PM incoming  :tu:
No Life Club Posts: 1,355
Re: Brass rod for SAK modding
« Reply #3 on: March 06, 2018, 05:25:11 PM »
So for £2.5 we get 4 rods 165mm long with diameter of 2.2 mm?

There is no magic therefore gadgets!
Admin Team Absolutely No Life Club Posts: 6,947 I brake for cake
Re: Brass rod for SAK modding
« Reply #4 on: March 06, 2018, 08:01:29 PM »
Yes.  All the rods are 165 mm long.

84 mm kit = 4 x 165 mm x 2.2 mm
91 mm kit = 2 x 165 mm x 2.2 mm; 2 x 165 mm x 2.5 mm
93 mm kit = 2 x 165 mm x 3.0 mm; 1 x 165 mm x 2.5 mm

If you just want 2.2 mm rod because you've already got some 2.5 mm, get the 84 mm kit.  Hope that's clear. :salute:
No Life Club Posts: 1,355
Re: Brass rod for SAK modding
« Reply #5 on: March 06, 2018, 09:28:34 PM »
Yup, all's clear.  :tu:

I was asking because I payed a bit more for the 3/32 inch ones I ordered yesterday.  :facepalm:

I might still buy a set or two from you, as with these I might actually stand a chance of finishing my mod this side of the big crunch/heath death of the universe/ big rip/ or whatever mode of ending it's existence this universe finally settles on.  :D

There is no magic therefore gadgets!
Sr. Member Posts: 444
Re: Brass rod for SAK modding
« Reply #6 on: March 07, 2018, 01:46:40 PM »
HI, I'm looking for 2.0 and 2.5 nickel silver rods. Do you have something? Thanks.
Admin Team Absolutely No Life Club Posts: 6,947 I brake for cake
Re: Brass rod for SAK modding
« Reply #7 on: March 07, 2018, 01:51:50 PM »
No, brass only sorry.
Admin Team Absolutely No Life Club Posts: 6,947 I brake for cake
Re: Brass rod for SAK modding
« Reply #8 on: March 12, 2018, 06:01:52 AM »
Here's the rod, cut to length and sorted into the different kits

Top to bottom: 84mm, 91mm, 93mm.
No Life Club Posts: 2,612
Re: Brass rod for SAK modding
« Reply #9 on: March 13, 2018, 07:41:28 AM »
Hiraethus,

I’ll take one of each kits, with postage to Canada.


PM SENT
« Last Edit: March 13, 2018, 07:51:18 AM by Marc_in_NS »
Admin Team Absolutely No Life Club Posts: 6,947 I brake for cake
Re: Brass rod for SAK modding
« Reply #10 on: March 13, 2018, 10:20:06 AM »
Replied. :tu:
Sr. Member Posts: 444
Re: Brass rod for SAK modding
« Reply #11 on: March 15, 2018, 08:44:31 PM »
Ordered!  :like:
Admin Team Absolutely No Life Club Posts: 6,947 I brake for cake
Re: Brass rod for SAK modding
« Reply #12 on: March 15, 2018, 09:25:46 PM »
I'm going to have to order some more brass. :tu:
Admin Team Absolutely No Life Club Posts: 6,947 I brake for cake
Re: Brass rod for SAK modding
« Reply #13 on: March 19, 2018, 05:02:38 PM »
I underestimated the weight of the envelopes ::) so I'll have to change the prices slightly.

Was:

First class untracked postage costs for up to 4 kits as follows:
UK £1.50
Europe £2.50
Rest of world £4.00
Contact me for prices for larger amounts.

Now:

First class untracked postage costs for up to 2 kits as follows:
UK £1.50
Europe £3.00
Rest of world £4.00

First class untracked postage costs for 3 or more kits as follows:
UK £2.00
Europe £4.50
Rest of world £5.50
« Last Edit: March 19, 2018, 05:04:10 PM by hiraethus »
No Life Club Posts: 1,388
Re: Brass rod for SAK modding
« Reply #14 on: March 31, 2018, 08:55:59 PM »
 Are these still available? if so can you hook me up with 2 X 91 kits UK post please  :salute:
Sr. Member Posts: 444
Re: Brass rod for SAK modding
« Reply #15 on: April 05, 2018, 04:46:24 PM »
Ordered!  :like:
Just now received letter. Thank you very much!


Sent from my iPad using Tapatalk
Zombie Apprentice Posts: 13,821 Hidalgo, Castillo del Hook
Re: Brass rod for SAK modding
« Reply #16 on: April 20, 2018, 12:35:27 PM »
Do you still have any? :)

Hooked, like everyone else. ;)

All hail the hook!
Admin Team Absolutely No Life Club Posts: 6,947 I brake for cake
Re: Brass rod for SAK modding
« Reply #17 on: April 20, 2018, 12:37:18 PM »
No 2.2 mm at the moment, but I should be getting some towards the end of the month.  I'll check the dates and let you know.
Zombie Apprentice Posts: 13,821 Hidalgo, Castillo del Hook
Re: Brass rod for SAK modding
« Reply #18 on: April 20, 2018, 12:45:33 PM »
Thanks. I was thinking of one 93mm kit and one 84mm kit.  :)

Hooked, like everyone else. ;)

All hail the hook!
Admin Team Absolutely No Life Club Posts: 6,947 I brake for cake
Re: Brass rod for SAK modding
« Reply #19 on: April 24, 2018, 10:51:41 AM »
Got a small quantity of 2.2 on the way.  Should be here later in the week.
Zombie Apprentice Posts: 12,739
Re: Brass rod for SAK modding
« Reply #20 on: April 24, 2018, 12:05:12 PM »
I better just bite the bullet and order some...

Syph's work is gorgeous but out of my price range so I'll have to start trying myself...

Buy now or regret later
Admin Team Absolutely No Life Club Posts: 6,947 I brake for cake
Re: Brass rod for SAK modding
« Reply #21 on: April 24, 2018, 12:25:25 PM »
You really should. :pok:  The kits are cheap, and I don't know when I'll be getting more. :pok: :pok: :D
Admin Team Absolutely No Life Club Posts: 6,947 I brake for cake
Re: Brass rod for SAK modding
« Reply #22 on: April 27, 2018, 12:23:52 PM »
Got 20 x 2.2 mm rods in stock, along with plenty of 2.5 and 3.0.  If you want to order some PM me - I won't be able to post until next week but if you're in the UK (or Ireland :pok:) you should get it by next weekend at the latest if you order before Monday.
Zombie Apprentice Posts: 13,821 Hidalgo, Castillo del Hook
Re: Brass rod for SAK modding
« Reply #23 on: April 27, 2018, 12:38:48 PM »
 :tu:
Let me sleep on it.  :D

Hooked, like everyone else. ;)

All hail the hook!
Admin Team Absolutely No Life Club Posts: 6,947 I brake for cake
Re: Brass rod for SAK modding
« Reply #24 on: April 27, 2018, 12:53:40 PM »
It won't be very comfortable; they're only small and may have sharp ends. :facepalm:
Admin Team Absolutely No Life Club Posts: 6,947 I brake for cake
Re: Brass rod for SAK modding
« Reply #25 on: May 03, 2018, 01:02:05 PM »
And I'm out of 2.2, again...  I really need to get a load of this in.
Zombie Apprentice Posts: 13,821 Hidalgo, Castillo del Hook
Re: Brass rod for SAK modding
« Reply #26 on: May 03, 2018, 02:23:03 PM »
I slept on it too long, I guess.  :D :rofl: :facepalm:

Hooked, like everyone else. ;)

All hail the hook!
No Life Club Posts: 2,612
Re: Brass rod for SAK modding
« Reply #27 on: May 06, 2018, 01:39:05 AM »
I have been using some of the stock you shipped. Beautiful fit, I will get some more for sure.
Zombie Apprentice Posts: 12,739
Re: Brass rod for SAK modding
« Reply #28 on: May 06, 2018, 10:02:02 PM »
Did you post my order? :angel:

Buy now or regret later
Admin Team Absolutely No Life Club Posts: 6,947 I brake for cake
Re: Brass rod for SAK modding
« Reply #29 on: May 07, 2018, 08:27:49 AM »
Not yet, sorry Nick.

 

Donations

Operational Funds

Help us keep the Unworkable working!
Donate with PayPal!
August Goal: $300.00
Due Date: Aug 31
Total Receipts: $89.00
PayPal Fees: $5.86
Net Balance: $83.14
Below Goal: $216.86
Site Currency: USD
28% 
August Donations

Community Links


Powered by EzPortal
SMF 2.0.15 | SMF © 2017, Simple Machines
Page created in 0.881 seconds with 33 queries.
© 2018 Defender Web & Tool