Multitool.org Forum
+-

Hello Lurker! Remove this ad and much more by logging in.


MOD User Badge Request

us Offline FolderBeholder

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 7,656
MOD User Badge Request
on: May 04, 2018, 05:15:16 PM
Seems I've accumulated some modded SAKs over the years in search of one that is right for my needs at various points in my SAK journey.
At this time my EDC is an Expedition...pretty much a Traveller Lite, but with both the wood and metal saws., it's the bottom SAK in the photos.

The left knife (GigaHz built), is the one I will go back to if the Expedition doesn't make the cut, but for now I'm going with the Expedition.
The next knife I just got, an older Woodsman, but folks here have stated that the scales are not original to the knife, so I'm considering it a mod at this time.
Third knife was a mod I bought that is an 84mm knife with wood saw and scissors and I carried it for a while and liked it, but lack of scale tools made me shelve it for now.
The next two are titanium mods by Robert L. and are great mods of course.  The 93mm just ended up being longer than I prefer.  The 91mm is a beauty and I just display it at this time.
The next one is a mod I dreamt up and GigaHz built, turned out great, but I think I have one too many Phillips in the build (my fault), so I haven't carried it.
GigaHz built the St. Christopher mod for me, it's lovely, but I worry that the inlay may pop off as I can feel the edges, so that is why I've opted to not carry it.
Bottom knife is "Emma" the Expedition and the new contender as my EDC.







Rest in peace ColoSwiss, you will always be remembered.


id Offline jaya_man

  • Global Moderator
  • *
  • Absolutely No Life Club
  • *
    • Posts: 9,012
Re: MOD User Badge Request
Reply #1 on: May 04, 2018, 05:19:32 PM
Awarded.... Congrats again Lisa :cheers:


us Offline FolderBeholder

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 7,656
Re: MOD User Badge Request
Reply #2 on: May 04, 2018, 05:28:21 PM
Awarded.... Congrats again Lisa :cheers:
Thank you jaya_man!  :cheers:  :hatsoff:
Rest in peace ColoSwiss, you will always be remembered.


us Offline Nix

  • *
  • Absolute Zombie Club
  • *********
    • Posts: 24,263
Re: MOD User Badge Request
Reply #3 on: May 04, 2018, 05:34:45 PM
Lovely collection!  :tu:  :like:


gb Offline Wspeed

  • *
  • Just Bananas
  • *************
    • Posts: 76,225
Re: MOD User Badge Request
Reply #4 on: May 04, 2018, 05:35:24 PM
Congratulations again on your Mod User Badge :cheers:
I love the look of that Cabon Fibre SAK  :drool: :like:
fail to prepare prepare to fail


us Offline FolderBeholder

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 7,656
Re: MOD User Badge Request
Reply #5 on: May 04, 2018, 05:41:24 PM
Lovely collection!  :tu:  :like:
Thank you Nix!  :cheers:
Congratulations again on your Mod User Badge :cheers:
I love the look of that Cabon Fibre SAK  :drool: :like:
Thank you, CF was a daily carry for quite a while.  :cheers:
Rest in peace ColoSwiss, you will always be remembered.


00 Offline Mechanickal

  • *
  • Zombie Apprentice
  • ********
    • Posts: 14,690
Re: MOD User Badge Request
Reply #6 on: May 04, 2018, 06:22:20 PM
Quote
Third knife was a mod I bought that is an 84mm knife with wood saw and scissors and I carried it for a while and liked it, but lack of scale tools made me shelve it for now.

EXACTLY what I will try to built in the future...

Unless I find one for sale at a decent price :pok: :D

:rofl:


us Offline FolderBeholder

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 7,656
Re: MOD User Badge Request
Reply #7 on: May 04, 2018, 06:39:36 PM
Quote
Third knife was a mod I bought that is an 84mm knife with wood saw and scissors and I carried it for a while and liked it, but lack of scale tools made me shelve it for now.

EXACTLY what I will try to built in the future...

Unless I find one for sale at a decent price :pok: :D

:rofl:
:rofl:
You should build one, it makes for nice pocket carry.  This one has the Wenger scissors.
Rest in peace ColoSwiss, you will always be remembered.


us Offline GoatDragon

  • *
  • Hero Member
  • *****
    • Posts: 698
  • SAK 4 life
Re: MOD User Badge Request
Reply #8 on: May 04, 2018, 06:39:49 PM
 :drool: That carbon fiber scaled SAK is sexy af. :drool:

I need something like that to go with my carbon fiber Spyderco Caly 3.5 EDC!
« Last Edit: May 04, 2018, 06:41:13 PM by GoatDragon »


us Offline FolderBeholder

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 7,656
Re: MOD User Badge Request
Reply #9 on: May 04, 2018, 06:41:42 PM
:drool: That carbon fiber scaled SAK is sexy af.  :drool:
I think it was someone here who modded it.  I bought it about 5 years ago.
Edit: Just found the name in an old PM, it was member PTRSAK.
« Last Edit: May 04, 2018, 06:44:36 PM by FolderBeholder »
Rest in peace ColoSwiss, you will always be remembered.


00 Offline Mechanickal

  • *
  • Zombie Apprentice
  • ********
    • Posts: 14,690
Re: MOD User Badge Request
Reply #10 on: May 04, 2018, 06:42:26 PM
Going to try and source some original 84mm Vic scissors tomorrow.
Wish me luck! :ahhh


us Offline FolderBeholder

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 7,656
Re: MOD User Badge Request
Reply #11 on: May 04, 2018, 06:44:09 PM
Going to try and source some original 84mm Vic scissors tomorrow.
Wish me luck! :ahhh
Good luck, you'll find them!
Rest in peace ColoSwiss, you will always be remembered.


se Offline RF52

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,780
Re: MOD User Badge Request
Reply #12 on: May 04, 2018, 06:49:54 PM
Congrats And very good looking SAK's

Sent fra min FRD-L09 via Tapatalk



us Offline FolderBeholder

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 7,656
Re: MOD User Badge Request
Reply #13 on: May 04, 2018, 06:55:23 PM
Congrats And very good looking SAK's
Thank you RF52!  :cheers:
Rest in peace ColoSwiss, you will always be remembered.


us Offline VICMAN

  • *
  • Zombie Apprentice
  • ********
    • Posts: 14,690
Re: MOD User Badge Request
Reply #14 on: May 04, 2018, 07:44:29 PM
Congratulations on your Mod User Badge FB! :D :cheers: :cheers:

Great collection! :like: :tu: :tu:


00 Offline jnoxyd

  • No Life Club
  • ******
    • Posts: 1,117
Re: MOD User Badge Request
Reply #15 on: May 04, 2018, 07:52:59 PM
Nice collection  :like:


us Offline FolderBeholder

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 7,656
Re: MOD User Badge Request
Reply #16 on: May 04, 2018, 08:12:40 PM
Thank you Vicman and jnoxyd.
I found 3 more!  I think all that's left is some filing on the side of the blade versions I have from SwissBianco.


The top one is a Farmer with a special fire striker.
Middle is one made by a man who goes by ALM.
Bottom one is one of Robert's work from what I recall, a Midshipman variant, just not entirely sure as I bought it second-hand.

Rest in peace ColoSwiss, you will always be remembered.


gb Offline Wspeed

  • *
  • Just Bananas
  • *************
    • Posts: 76,225
Re: MOD User Badge Request
Reply #17 on: May 04, 2018, 08:14:38 PM
Very nice colours FB especially the ALM one  :drool: :like:
fail to prepare prepare to fail


us Offline FolderBeholder

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 7,656
Re: MOD User Badge Request
Reply #18 on: May 04, 2018, 08:17:33 PM
Very nice colours FB especially the ALM one  :drool: :like:
That's interesting because I sold my first GAK knife due to it being olive drab color, but my tastes must have evolved because I like this one.  :tu:
Rest in peace ColoSwiss, you will always be remembered.


us Offline Obi1shinobee

  • Absolutely No Life Club
  • *******
    • Posts: 6,661
  • Master LM Squirt Ps4 And Lord of Navitools
Re: MOD User Badge Request
Reply #19 on: May 04, 2018, 08:21:29 PM
Seems I've accumulated some modded SAKs over the years in search of one that is right for my needs at various points in my SAK journey.
At this time my EDC is an Expedition...pretty much a Traveller Lite, but with both the wood and metal saws., it's the bottom SAK in the photos.
(Image removed from quote.)
The left knife (GigaHz built), is the one I will go back to if the Expedition doesn't make the cut, but for now I'm going with the Expedition.
The next knife I just got, an older Woodsman, but folks here have stated that the scales are not original to the knife, so I'm considering it a mod at this time.
Third knife was a mod I bought that is an 84mm knife with wood saw and scissors and I carried it for a while and liked it, but lack of scale tools made me shelve it for now.
The next two are titanium mods by Robert L. and are great mods of course.  The 93mm just ended up being longer than I prefer.  The 91mm is a beauty and I just display it at this time.
The next one is a mod I dreamt up and GigaHz built, turned out great, but I think I have one too many Phillips in the build (my fault), so I haven't carried it.
GigaHz built the St. Christopher mod for me, it's lovely, but I worry that the inlay may pop off as I can feel the edges, so that is why I've opted to not carry it.
Bottom knife is "Emma" the Expedition and the new contender as my EDC.

(Image removed from quote.)

 :gimme:


00 Offline Borg

  • *
  • No Life Club
  • ******
    • Posts: 2,447
Re: MOD User Badge Request
Reply #20 on: May 04, 2018, 08:21:53 PM
Very nice collection  :like:  congrats on the badge..in fact i might just go for that badge myself later, although i have only 1  :salute:
Poker Face Milk dud world champion 2021


us Offline VICMAN

  • *
  • Zombie Apprentice
  • ********
    • Posts: 14,690
Re: MOD User Badge Request
Reply #21 on: May 04, 2018, 08:23:01 PM
Thank you Vicman and jnoxyd.
I found 3 more!  I think all that's left is some filing on the side of the blade versions I have from SwissBianco.
The top one is a Farmer with a special fire striker.
Middle is one made by a man who goes by ALM.
Bottom one is one of Robert's work from what I recall, a Midshipman variant, just not entirely sure as I bought it second-hand.

Nice SAKS FB! :like: :tu: :tu:




us Offline FolderBeholder

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 7,656
Re: MOD User Badge Request
Reply #22 on: May 04, 2018, 08:23:19 PM
Very nice collection  :like:  congrats on the badge..in fact i might just go for that badge myself later, although i have only 1  :salute:
Cool!, 1 is all it takes!  :cheers:
Rest in peace ColoSwiss, you will always be remembered.


us Offline FolderBeholder

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 7,656
Re: MOD User Badge Request
Reply #23 on: May 04, 2018, 08:24:53 PM
Rest in peace ColoSwiss, you will always be remembered.


us Offline FolderBeholder

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 7,656
Re: MOD User Badge Request
Reply #24 on: May 04, 2018, 08:25:25 PM
Rest in peace ColoSwiss, you will always be remembered.


00 Offline Mechanickal

  • *
  • Zombie Apprentice
  • ********
    • Posts: 14,690
Re: MOD User Badge Request
Reply #25 on: May 04, 2018, 08:29:18 PM
:ahhh

A Midshipman! :ahhh

:ahhh


us Offline Poncho65

  • Global Moderator
  • *
  • Just Bananas
  • *
    • Posts: 88,457
Re: MOD User Badge Request
Reply #26 on: May 06, 2018, 07:25:28 PM
Some very nice pieces :o :like: and congrats on the badge :tu:


 

Donations

Operational Funds

Help us keep the Unworkable working!
Donate with PayPal!
April Goal: $300.00
Due Date: Apr 30
Total Receipts: $115.65
PayPal Fees: $7.03
Net Balance: $108.62
Below Goal: $191.38
Site Currency: USD
36% 
April Donations

Community Links


Powered by EzPortal