I just used 2 speedlights outside the box. If interested I can post a picture of setup tomorrow. (Image removed from quote.)
I just used 2 speedlights outside the box. If interested I can post a picture of setup tomorrow. Sent from my iPhone using Tapatalk
hello everyone and thank you,i'm finally home so i could take some pics. The paper i used is this translucent thick paper for drawing:(Image removed from quote.)Out of it i made a cube without one face and i clamped a white thick paper sheet (you can do it much stronger and nicer and foldable and etc etc):(Image removed from quote.)The setup then it's quite simple. 2 speedlites on the sides and the camera in front. I used my olympus em10mkII just because it has the integrated flash. (technical stuff: the speedlites are in slave mode and completely manual. I used the integrated flash to trigger the speedlights and give a bit of front fill light. I could have used any other camera and use a trigger cable or a wireless trigger but with the integrated flash is much comfortable):(Image removed from quote.)Here is an example of what happens (i actually triggered the lights with another camera, the one taking the picture, so there is no light coming from the camera on the table):(Image removed from quote.)I hope that's clear enough