This is a bit of an odd model. The Outbound 20 in 1 LED multi-tool features 2 LED lights. Press the button once to activate the rear light, another time to activate the front light, and once more to turn the LED function off. I find it interesting that they used a valuable tool slot for a carabiner. the included knife is of a good size. That 20 in 1 function must included the driver bits which stored in a back pocket slot of the sheath.
20230110_202306A by
Chako, on Flickr
The pliers are spring loaded.
20230110_202344A by
Chako, on Flickr
The scissors are not bad and they work great on paper and twin. The driver bar took me some time to figure out how to extract it from the tool. At first, I could not find any nail nicks or anything that would help to get it out. For the first 2 deployments, I used the flat driver bit to gently pry it open. Once I looked in the tool with the driver bar out, I noticed a plastic bar. I then noticed there is a lever to help you get the driver bar out part ways where you can use your fingers to deploy it fully. The white arrow is pointing to the lever.
20230110_202436A by
Chako, on Flickr
20230110_202512A by
Chako, on Flickr
Here we have the rear facing LED on.
20230110_202526A by
Chako, on Flickr
And the front facing LED.
20230110_202536A by
Chako, on Flickr