the tool with no name ! (yet)

Essexman · **Reply #30 on:** October 09, 2013, 03:47:21 PM

Great design idea and development guys, well done indeed.

Just requires a slot for tritium

Tofty · **Reply #31 on:** November 08, 2013, 10:27:02 PM

Thanks Guys,

Time for an update; got the revised jigsaw holder back a few days ago and it works perfectly.
I did discover something new however and that is that the wave clip slot is a slightly different size to the charge. It doesn't mean the holder won't fit but it does mean a bit of filing is needed down one edge of the interface clip, not the end of the world though and in the charge it fits like a glove.

As you can see i got a bit carried away and painted the text to make it clearer and stand out.

I'll have to have a think about how to proceed with these.

Taxi Dad · **Reply #32 on:** November 08, 2013, 10:37:03 PM

looking good Peter !
thanks for the update, Xmas is coming

enki_ck · **Reply #33 on:** November 08, 2013, 11:14:54 PM

Looks cool.

Do you think you could find someone to make them for you at a more affordable price than Shapeways? You could sell them through EDCS as Bob did with the saws.

Whoey · **Reply #34 on:** November 09, 2013, 11:50:57 AM

"klip-sawz" ?

Syncop8r · **Reply #35 on:** November 22, 2013, 07:29:05 AM

Nice. How about one that clips into a Leatherman Bit Driver (so the end would be like the end of a bit driver extender)?

Cupboard · **Reply #36 on:** November 22, 2013, 12:05:09 PM

Wouldn't that just fall straight out as soon as you pulled it?

Taxi Dad · **Reply #37 on:** November 22, 2013, 12:27:59 PM

Quote from: Syncop8r on November 22, 2013, 07:29:05 AM

Nice. How about one that clips into a Leatherman Bit Driver (so the end would be like the end of a bit driver extender)?

Quote from: Cupboard on November 22, 2013, 12:05:09 PM

Wouldn't that just fall straight out as soon as you pulled it?

Peter thought of all those issues ! clever dude that he is

Cupboard · **Reply #38 on:** November 22, 2013, 07:36:52 PM

Hold on a mo...

Peter's design deals with the falling out issue because it locks in to the locking tab. The bit driver has no locking tab so one that fitted in to the bit driver would just fall out wouldn't it?

Smashie · **Reply #39 on:** November 22, 2013, 08:05:39 PM

Why do I have the irrational urge to buy one of these for my Surge?

Taxi Dad · **Reply #40 on:** November 22, 2013, 08:36:02 PM

any news on availability Peter ? (impatient aren't I

)

Syncop8r · **Reply #41 on:** November 22, 2013, 09:57:41 PM

Quote from: Cupboard on November 22, 2013, 12:05:09 PM

Wouldn't that just fall straight out as soon as you pulled it?

The bit holder on my Skele has a little latch to keep bits in place but yes, they will come out with some force - and given most jigsaw blades work on the pull stroke you would have to be careful.
Having said that, people have modded jigsaw blades to go straight into bit holders.

Tofty · **Reply #42 on:** November 25, 2013, 06:57:57 PM

I've just ordered a small number of these (5) so some should be available just before christmas possibly.

I don't know of any other manufacturing process that could produce these parts in the overall shape and cavity layout required, other than 3D printing. Also as far as i know Shapeways are the cheapest provider of stainless printed material there is, so for now they're pretty much the only choice.

The Skeletool bit holder is a possibility as the side clip would help retain it, however it doesn't hold the bits in completely securely as they can be pulled out by hand even with the clip engaged.

Etherealicer · **Reply #43 on:** December 04, 2013, 11:12:42 AM

Quote from: Tofty on November 25, 2013, 06:57:57 PM

I've just ordered a small number of these (5) so some should be available just before christmas possibly.

I don't know of any other manufacturing process that could produce these parts in the overall shape and cavity layout required, other than 3D printing. Also as far as i know Shapeways are the cheapest provider of stainless printed material there is, so for now they're pretty much the only choice.

The Skeletool bit holder is a possibility as the side clip would help retain it, however it doesn't hold the bits in completely securely as they can be pulled out by hand even with the clip engaged.

I'm looking forward to this, might have to get me one for... wait I don't have a reason but then I don't need one. I really love this project.

Name Suggestions:
Jiggsawjiggle
Jiggsaw-Juggler

J-sews · **Reply #44 on:** January 20, 2014, 05:37:52 AM

Excellent bit of engineering work there Peter!

(sorry it took so long for me to notice this thread) Have there been any further developments on this project?

gregozedobe · **Reply #45 on:** January 20, 2014, 05:42:26 AM

Quote from: J-sews on January 20, 2014, 05:37:52 AM

Excellent bit of engineering work there Peter! (sorry it took so long for me to notice this thread) Have there been any further developments on this project?

I'm also interested in buying (a finished) one

Tofty · **Reply #46 on:** January 22, 2014, 10:37:41 AM

Thanks Guys,
There are 3 Jigsaw Holders up on EDCSource right now:
http://www.edcsource.com/Toftys-Jigsaw-Holder,name,117042,auction_id,auction_details
These probably won't be the last but i can't say when some will next be available.

gregozedobe · **Reply #47 on:** January 22, 2014, 01:10:19 PM

Quote from: Tofty on January 22, 2014, 10:37:41 AM

Thanks Guys,
There are 3 Jigsaw Holders up on EDCSource right now:
http://www.edcsource.com/Toftys-Jigsaw-Holder,name,117042,auction_id,auction_details
These probably won't be the last but i can't say when some will next be available.

Thanks Tofty.

There are now 2 left. Please make mine to suit a LM Charge.

Tofty · **Reply #48 on:** January 24, 2014, 10:02:15 AM

Thanks a lot Greg,
I'll try and get it in the post for you tomorrow.

Tofty · **Reply #49 on:** February 14, 2014, 11:31:11 AM

Just a reminder that the Jigsaw Holders will be up on EDCSource for just a few more days, after that i'll be doing something different with them.
Link: http://www.edcsource.com/Toftys-Jigsaw-Holder,name,117042,auction_id,auction_details

screwloose · **Reply #50 on:** February 22, 2014, 11:47:44 PM

can't you make one to fit in the MUT?
soi can get rid of the carbon scraper and replace it with a replaceble saw!!

skygear · **Reply #51 on:** February 02, 2015, 04:49:34 AM

Got one. Gold. Stupid M3 x 6mm are inexpensive enough. Then they want $10 for shipping.

skygear · **Reply #52 on:** February 02, 2015, 04:48:04 PM

Could have put a couple trits on it with all this extra real estate.

skygear · **Reply #53 on:** February 02, 2015, 04:49:04 PM

Beynon5 · **Reply #54 on:** July 23, 2015, 12:18:30 PM

Ah I seem to be reviving a dead thread here but -

These look amazing and I'd love one for my wave. Are there any still available to purchase or indeed to be made?

I dont mind if I have to fettle a little with the charge model!

I have to be honest - I'm part of many other forums for many other things (I'm a keen guitarist etc) and I've never known ingenuity and innovation like it!

gregozedobe · **Reply #55 on:** July 23, 2015, 12:29:37 PM

Quote from: Beynon5 on July 23, 2015, 12:18:30 PM

Ah I seem to be reviving a dead thread here but -

These look amazing and I'd love one for my wave. Are there any still available to purchase or indeed to be made?

I dont mind if I have to fettle a little with the charge model!

I have to be honest - I'm part of many other forums for many other things (I'm a keen guitarist etc) and I've never known ingenuity and innovation like it!

Maybe send a PM to Tofty and ask him where these are currently at ? In case he doesn't see this thread.

Etherealicer · **Reply #56 on:** July 23, 2015, 12:35:23 PM

Quote from: gregozedobe on July 23, 2015, 12:29:37 PM

Quote from: Beynon5 on July 23, 2015, 12:18:30 PM
Ah I seem to be reviving a dead thread here but -

These look amazing and I'd love one for my wave. Are there any still available to purchase or indeed to be made?

I dont mind if I have to fettle a little with the charge model!

I have to be honest - I'm part of many other forums for many other things (I'm a keen guitarist etc) and I've never known ingenuity and innovation like it!

Maybe send a PM to Tofty and ask him where these are currently at ? In case he doesn't see this thread.

Links are in Toftys signature

Tool with no Name

Beynon5 · **Reply #57 on:** July 23, 2015, 12:38:46 PM

Quote from: Etherealicer on July 23, 2015, 12:35:23 PM

Quote from: gregozedobe on July 23, 2015, 12:29:37 PM
Quote from: Beynon5 on July 23, 2015, 12:18:30 PM
Ah I seem to be reviving a dead thread here but -

These look amazing and I'd love one for my wave. Are there any still available to purchase or indeed to be made?

I dont mind if I have to fettle a little with the charge model!

I have to be honest - I'm part of many other forums for many other things (I'm a keen guitarist etc) and I've never known ingenuity and innovation like it!

Maybe send a PM to Tofty and ask him where these are currently at ? In case he doesn't see this thread.
Links are in Toftys signature

Tool with no Name

Thanks for that! On it now!

AdmSlc · **Reply #58 on:** September 10, 2015, 04:59:46 AM

I like what I see here.

Obi1shinobee · **Reply #59 on:** December 12, 2016, 05:54:52 AM

Hello Lurker! Remove this ad and much more by logging in.

the tool with no name ! (yet)

Donations

Community Links