Gerber Mp600 owners club ;)

[Monrogue]

As far as EDC, although I have a sheath for my MP600, I often just toss it in my back pocket (where I barely notice it )

Right or left? I've got to be honest, I've never even considered back pocket carry got a multi...

Wallet in right pocket and MP600 in left.

I think ill have to try that...

I carry mine in the right back pocket next to my wallet, on the right of it.  Keeps it vertical and in place so it's less noticeable.  Of course the larger/heavier the multi, the less effective this method is.

Sent from my SM-G920R4 using Tapatalk

[WoodsDuck]

Got my MP600 out to play with the mechanisms a bit and noticed the PE blade, which I used once after getting it a week ago, had some flecks of rust. Guess the finish doesn't stand up to the Ohio Valley environment as well as I expected.

[AlephZero]

I can't believe I hadn't joined this club yet...



Here's my MP600 DET, which I love and adore   

[sLaughterMed]

my other submission. Black and White MP600 Bluntnose. Been carrying this on a pocket dangler all day, seems to work best for me

[captain spaulding]

my other submission. Black and White MP600 Bluntnose. Been carrying this on a pocket dangler all day, seems to work best for me

looks great and its probably not bad on the dangler.

[Monrogue]

my other submission. Black and White MP600 Bluntnose. Been carrying this on a pocket dangler all day, seems to work best for me

I like the dual color scheme

Sent from my SM-G920R4 using Tapatalk

[sawman]

Nice, and I like to see someone take advantage of the lanyard loop. One of the many nice features of the tool

[captain spaulding]

I need some MP600 parts so I can put mine together.

[sLaughterMed]

looks great and its probably not bad on the dangler.

The two tone is nice, really makes the tool look much sharper, like it's wearing a suit. And the pocket dangler really makes this tool for me. I cant seem to find another way to carry this tool.

Nice, and I like to see someone take advantage of the lanyard loop. One of the many nice features of the tool

Yep, lanyard loop is nice, if you use it. If you don't, I can see how it's frustrating to have. It is a bit thick, I feel like halving that tool slot with the small driver and adding a woodsaw would make Gerber a real competitor.

I need some MP600 parts so I can put mine together.

PM sent

[ToolJoe]

I'm really close to snagging a bladeless MP600. I think it would be a good compliment to carrying a folder 

[jerseydevil]

I'm really close to snagging a bladeless MP600. I think it would be a good compliment to carrying a folder 

The bladeless MP425 mod is perfect with a dedicated folder.    The bladeless 600 would do the same in a larger package.  I need to get myself one as well.

[Etherealicer]

I'm really close to snagging a bladeless MP600. I think it would be a good compliment to carrying a folder 

The bladeless MP425 mod is perfect with a dedicated folder.    The bladeless 600 would do the same in a larger package.  I need to get myself one as well.

I think I need to get me som MP400

I blame JD kirky

[AimlessWanderer]

I'm really close to snagging a bladeless MP600. I think it would be a good compliment to carrying a folder 

The bladeless MP425 mod is perfect with a dedicated folder.    The bladeless 600 would do the same in a larger package.  I need to get myself one as well.

I think the only snag with the official bladeless 600 is the replacable cutters. Shame they didn't go with a standard plier head IMHO

[Etherealicer]

I'm really close to snagging a bladeless MP600. I think it would be a good compliment to carrying a folder 

The bladeless MP425 mod is perfect with a dedicated folder.    The bladeless 600 would do the same in a larger package.  I need to get myself one as well.

I think the only snag with the official bladeless 600 is the replacable cutters. Shame they didn't go with a standard plier head IMHO

They should also change their blade-holder. Hard to get u-shanks with holes these days...

[AimlessWanderer]

I'm really close to snagging a bladeless MP600. I think it would be a good compliment to carrying a folder 

The bladeless MP425 mod is perfect with a dedicated folder.    The bladeless 600 would do the same in a larger package.  I need to get myself one as well.

I think the only snag with the official bladeless 600 is the replacable cutters. Shame they didn't go with a standard plier head IMHO

They should also change their blade-holder. Hard to get u-shanks with holes these days...

I think we can still get them over here, so if you need some give me a yell and I'll see what I can find

[ToolJoe]

It looks like Home Depot has some u shank blades with holes on their site.

I've read about the cutters not being the strong point but I don't cut that much in the way of heavy materials. The extent of what I might cut is string for the weed wacker and the occasional coat hanger.

I rotate my carry between a Crater C33T and a Gerber EAB.

[AimlessWanderer]

Noted Joe 

The one time that I crunched the cutters though, I wasn't actually cutting anything... I was actually using the main gripping area while trying to assemble a large kerosene heater, and gripped a littled too deeply in the plier heads.  just something to be wary of mate 

[Etherealicer]

I'm really close to snagging a bladeless MP600. I think it would be a good compliment to carrying a folder 

The bladeless MP425 mod is perfect with a dedicated folder.    The bladeless 600 would do the same in a larger package.  I need to get myself one as well.

I think the only snag with the official bladeless 600 is the replacable cutters. Shame they didn't go with a standard plier head IMHO

They should also change their blade-holder. Hard to get u-shanks with holes these days...

I think we can still get them over here, so if you need some give me a yell and I'll see what I can find

From time to time you can get some cheapos here, mostly for wood, rarely for metal. But never quality blades, or a bit of more exotic ones like the waved one for softer materials:

[ToolJoe]

Noted Joe 

The one time that I crunched the cutters though, I wasn't actually cutting anything... I was actually using the main gripping area while trying to assemble a large kerosene heater, and gripped a littled too deeply in the plier heads.  just something to be wary of mate 

Eeekk thats not good..

[AimlessWanderer]

It was actually with a MP700 not MP600, but either way I'd prefer the 600 to have standard jaws

That being said..... I still do actually like the MP700, but there isn't the option for an alternate plier head on that tool. I have also learnt my lesson and try to pay more attention if using the main gripping area 

[sawman]

I've found the standard (non-carbide) cutters to work great. I prefer them, which is why I bought the standard stainless version.

[Monrogue]

I'm really close to snagging a bladeless MP600. I think it would be a good compliment to carrying a folder 

The bladeless MP425 mod is perfect with a dedicated folder.    The bladeless 600 would do the same in a larger package.  I need to get myself one as well.

I think the only snag with the official bladeless 600 is the replacable cutters. Shame they didn't go with a standard plier head IMHO

I agree

Sent from my SM-G920R4 using Tapatalk

[Monrogue]

I'm really close to snagging a bladeless MP600. I think it would be a good compliment to carrying a folder 

The bladeless MP425 mod is perfect with a dedicated folder.    The bladeless 600 would do the same in a larger package.  I need to get myself one as well.

I'm surprised you don't have one ok:

Sent from my SM-G920R4 using Tapatalk

[jerseydevil]

I'm really close to snagging a bladeless MP600. I think it would be a good compliment to carrying a folder 

The bladeless MP425 mod is perfect with a dedicated folder.    The bladeless 600 would do the same in a larger package.  I need to get myself one as well.

I'm surprised you don't have one ok:

Sent from my SM-G920R4 using Tapatalk

Me too.

[WoodsDuck]

Managed to cobble together one more MP600 out of the remains of the junkers I bought to modify my Pro Scout and MP400.

[David]

 

[SAK Guy]

Just outta the box, didn't even clean the grease off yet!

[Monrogue]

Just outta the box, didn't even clean the grease off yet!
(Image removed from quote.)

Is this your first flicky?  It's addictive to flick them

Sent from my SM-G920R4 using Tapatalk

[jerseydevil]

Just outta the box, didn't even clean the grease off yet!
(Image removed from quote.)

Is this your first flicky?  It's addictive to flick them

That it is.  I've annoyed bosses quite a bit flicking at work. . Very nice SAK Guy!

[SAK Guy]

Just outta the box, didn't even clean the grease off yet!
(Image removed from quote.)

Is this your first flicky?  It's addictive to flick them

That it is.  I've annoyed bosses quite a bit flicking at work. . Very nice SAK Guy!

Yes Monrogue! 

Thanks JD!  I'm working on my technique!