Multitool.org Forum
+-

Hello Lurker! Remove this ad and much more by logging in.


Victorinox outrider mod

Offline arghles

  • Newbie
  • *
    • Posts: 5
Victorinox outrider mod
on: October 14, 2021, 03:26:26 PM
Hello I want to add a layer at my outrider victorinox is it possible? Where can I find tools and the things that can serve?

Inviato dal mio SM-N970F utilizzando Tapatalk



us Offline kamakiri

  • *
  • No Life Club
  • ******
    • Posts: 3,215
Re: Victorinox outrider mod
Reply #1 on: October 15, 2021, 07:25:11 PM
Certainly possible. Just need to find the donor parts you want and to get the right pins for the new width. Pins needed are different for liner lock vs slide lock.

What are you trying to add? 
If this post has been helpful in dating your Swiss Army Knife, please consider making a small contribution to help keep SAKWiki going


Offline arghles

  • Newbie
  • *
    • Posts: 5
Re: Victorinox outrider mod
Reply #2 on: October 15, 2021, 07:38:22 PM
Hello I want to add pliers and a small blade, and at the other side a hook. G10 scales and if possible replace the pins with screws

Inviato dal mio SM-N970F utilizzando Tapatalk


fr Offline hulk.

  • Newbie
  • *
    • Posts: 33
Re: Victorinox outrider mod
Reply #3 on: October 19, 2021, 11:58:48 AM
hello

adding an existing layer does not involve any great difficulty.

but composed a hybrid with tools of different sizes of sak it is much more complex

here I believe it is impossible.
the pliers and one of the tools that has one of the thickest springs with no space for the back tools.
and there is not enough room to add a small blade in front.

 :dunno:


Offline arghles

  • Newbie
  • *
    • Posts: 5
Re: Victorinox outrider mod
Reply #4 on: October 19, 2021, 12:44:17 PM
 The problem is find the pliers

Inviato dal mio SM-N970F utilizzando Tapatalk



fr Offline hulk.

  • Newbie
  • *
    • Posts: 33
Re: Victorinox outrider mod
Reply #5 on: October 19, 2021, 02:41:15 PM
Skipper,Work Champ,Hercules,..

you just have to find a donor

the clamp and also identical on the 91mm, it just has the additional nail, which does not interfere with this particular case


Offline arghles

  • Newbie
  • *
    • Posts: 5
Re: Victorinox outrider mod
Reply #6 on: October 19, 2021, 04:17:21 PM
The other solution is to buy a workchamp and remove a layer


Inviato dal mio iPad utilizzando Tapatalk


fr Offline hulk.

  • Newbie
  • *
    • Posts: 33
Re: Victorinox outrider mod
Reply #7 on: October 20, 2021, 09:57:00 AM
yes  ;)


us Offline kamakiri

  • *
  • No Life Club
  • ******
    • Posts: 3,215
Re: Victorinox outrider mod
Reply #8 on: November 04, 2021, 07:04:05 AM
Hello I want to add pliers and a small blade, and at the other side a hook. G10 scales and if possible replace the pins with screws

Inviato dal mio SM-N970F utilizzando Tapatalk

Actually, you can have all that, but you’d have to add another layer for the small blade. And it might as well have another tool on the opposite side.

The hook isn’t a problem. Just need all the right donor parts. And not behind the pliers.
If this post has been helpful in dating your Swiss Army Knife, please consider making a small contribution to help keep SAKWiki going


us Offline kamakiri

  • *
  • No Life Club
  • ******
    • Posts: 3,215
Re: Victorinox outrider mod
Reply #9 on: November 06, 2021, 04:52:52 AM
An ‘outer’ spring just needs to be used in one of the inner layers with either a saw or the main blade.

Lots of options for the small blade with an added layer. I’d use an opener layer spring and both 91mm blades. Could also be the layer you’d add the hook to.

Mock-up of hook and wood saw:
If this post has been helpful in dating your Swiss Army Knife, please consider making a small contribution to help keep SAKWiki going


 

Donations

Operational Funds

Help us keep the Unworkable working!
Donate with PayPal!
August Goal: $300.00
Due Date: Aug 31
Total Receipts: $25.00
PayPal Fees: $1.53
Net Balance: $23.47
Below Goal: $276.53
Site Currency: USD
 8%
August Donations

Community Links


Powered by EzPortal