One of the reasons I keep picking Gerber over Leatherman ...
-
@Kampfer said:
Nothing is perfect for every job, MT are designed to handle daily small tasks IMO. For bigger jobs, one should use dedicated tools if possible.
The MT you mention they do fall short when they are used to bite on large objects, but I think they are fine for deal with smaller objects like small nuts, cutting small wires.Lots of people here talk about using their pliers on nuts. I wouldn't dream of doing this unless it was an emergency.
[/quote]
I done that with a MT when I put together a dinning table, just for fun, I had dedicated tools near by. -
@50ft-trad said:
The fact is that many of their tools are unusable for some users. They need to recognise this if they are going to increase their market share. A Surge pliers can handle far less than a significantly cheaper Diesel can in my hands. Make that same tool more usable for more people, and you can win more orders. As it stands there is a large percentage of their tools that I (and other people) will instantly disregard and not consider buying due to these very basic issues.
Ahh but because tools like the Surge suit bigger hands then they are catering for a different share of the market. There is no 'one size fits all' IMO. I tend to steer away from the smaller ones.
Are the smaller (Fuse, Wave, MP400) multitools particularly uncomfortable for you, or do the larger framed tools just feel more reassuring?
-
... and as for using pliers as a spanner .. yes, emergencies only

-
@parnass said:
Excellent series of posts, 50ft-trad. I concur with several points concerning the ease of using Gerber vs. non-Gerber pliers, but I think the majority of your analysis addresses gripping larger objects.I've been thinking about this again recently, and wondering if I ought to take a series of wire cuting pics. This may be a task that people need to do more frequently, and might be a better comparison for people. It might also show slightly different results, based on the shapes of the various plier heads.
Worth doing?
-
@50ft-trad said:
Excellent series of posts, 50ft-trad. I concur with several points concerning the ease of using Gerber vs. non-Gerber pliers, but I think the majority of your analysis addresses gripping larger objects.
I've been thinking about this again recently, and wondering if I ought to take a series of wire cuting pics. This may be a task that people need to do more frequently, and might be a better comparison for people. It might also show slightly different results, based on the shapes of the various plier heads.
Worth doing?
Yes, please. I agree, that would be a very interesting comparison.

-
Go for it Al - your comparisons are always interesting

-
I've done some myself, I didn't put up pictures of every combination because it was getting silly.
</topic/47745
Having a look back at that, I see that I didn't think the Wingman was too bad. Well I've currently god a Sidekick on my desk at work as an emergency spare, and the sire cutters on that are terrible. They just don't meet.
-
@50ft-trad said:
Excellent series of posts, 50ft-trad. I concur with several points concerning the ease of using Gerber vs. non-Gerber pliers, but I think the majority of your analysis addresses gripping larger objects.
I've been thinking about this again recently, and wondering if I ought to take a series of wire cuting pics. This may be a task that people need to do more frequently, and might be a better comparison for people. It might also show slightly different results, based on the shapes of the various plier heads.
Worth doing?
Yes.
I've done a lot of testing but never bothered with pics. -
@Cupboard said:
I've done some myself, I didn't put up pictures of every combination because it was getting silly.</topic/47745
Having a look back at that, I see that I didn't think the Wingman was too bad. Well I've currently god a Sidekick on my desk at work as an emergency spare, and the sire cutters on that are terrible. They just don't meet.
We might be at cross purposes here Tom. I wasn't thinking in terms of cutting performance, as you and 3rdpig have got that well sorted, but more in respect of ergonomics again. I was just a little mindful that whilst this comparison is within the capacities of the pliers (on most of them at least), it might be outside what users are liable to do regularly with their tools
-
.... and before I start thinking through how best to do this, there's a strong possibility that Gerber will have a distinct ***ergonomic ***advantage again on some tools, not just due to the handle differences as already highlighted, but because they sometimes choose anvil cutters rather than bypass. Bypass cutters have to open a way to become level, before opening further to accommodate the wire. I don't know how much a difference that's likely to make, but I'd imagine it will have at least some effect on the final handle position
-
@zoidberg said:
If I didn't use pliers on nuts I wouldn't bother carrying them. ::)Reading this i assume you are no trained mechanic/engineer? :D
Most of us hate nuts that are damaged by grabbing them with pliers, there are dedicated tools out there - and pliers are only an emergency tool for use on nuts.
-
If I didn't use pliers on nuts I wouldn't bother carrying them. ::)
Reading this i assume you are no trained mechanic/engineer? :D
Most of us hate nuts that are damaged by grabbing them with pliers, there are dedicated tools out there - and pliers are only an emergency tool for use on nuts.
I also hate nuts that are damaged because the last numpty to turn them used oversized, worn, or sprained spanners. In 25 years of engineering, I have come across plenty of hex nuts that can <u>**only **</u>be turned with pliers, waterpump pliers, and stilsons .... or hammer and chisel/screwdriver ::)
-
Lots of people here talk about using their pliers on nuts. I wouldn't dream of doing this unless it was an emergency.
If I didn't use pliers on nuts I wouldn't bother carrying them. ::)
+1
One of the reasons I carry a multiplier. To turn nuts and bolts when I am no where near a tool box, which tends to be a lot.Nate
-
@50ft-trad said:
I also hate nuts that are damaged because the last numpty to turn them used oversized, worn, or sprained spanners. In 25 years of engineering, I have come across plenty of hex nuts that can <u>**only **</u>be turned with pliers, waterpump pliers, and stilsons .... or hammer and chisel/screwdriver ::)I agree that sometimes pliers or more aggressive methods are needed - but only due to idiots who damaged the nuts before by using non-matching tools.
-
@50ft-trad said:
I also hate nuts that are damaged because the last numpty to turn them used oversized, worn, or sprained spanners. In 25 years of engineering, I have come across plenty of hex nuts that can <u>**only **</u>be turned with pliers, waterpump pliers, and stilsons .... or hammer and chisel/screwdriver ::)
I agree that sometimes pliers or more aggressive methods are needed - but only due to idiots who damaged the nuts before by using non-matching tools.
And when regular tools strip them out.
Nate
-
Even adjustable spanners are known as Nut F***ers.
-
LOL! I haven't heard that in a while.
Nate
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
:ahhh
