(Not) My Design for a Multitool
-
-
Yep, I follow you.
I guess maybe I didn't elaborate very well in regards to the "folded" metal. Notice how on the Kershaw tool the sheet metal handle is actually folded in an "S" -shaped cross section? This technique was first introduced on the Leatherman Wave I believe. It allows the knife blades to be accessed from the outside of the handle, yet still provides plenty of surface area for your palm to squeeze against when using the pliers.It's a good compromise; when opened, the sharp edge of the knife blade is in-line with the edge of the tool, for easier cutting. And yet, your palm is not being dug into by the handle's thin sheet metal, as was the case with the Leatherman PST and Super Tool.
-
Posted some quick pics of the Knipex Plier Wrench.
</post/10338>
-
Are you still thinking of using the plier-wrench head in a multitool mod Tom? It looks like it would be a tricky project.
-
I think it would be very tricky, but there are several ways to do it - folding handles, half folding handles, extending handles, etc.
-
So I want to work on the design of a tool with the Knipex Plier Head at the core. I'm also thinking of having a ratcheting bit driver that can separate from the tool for true plier & screwdriver operation on a screw & nut. This WILL be tricky.
-
I have a couple Sears ratchets that might be adaptable.
-
I have started to carry a Draper ratchet driver very much like the top one in your photo Tom. I just tuck it down beside the bits in one of the pouch's. If the plastic piece on the top pulls of to reveal a 1/4" socket driver they are probably the same rebadged.
Dave
-
I can hardly wait to see what you come up with Tom. I'm thinking that attaching non-folding handles (which have various folding blades and tools in them) would be an achievable goal. And a ratchet device on the end of one handle is doable. Do you plan to use handles from an existing multitool, or fabricate your own from scratch?
-
I'd have to talk to my machinist friend to come up with handles from scratch. I'm really interested in a detachable ratcheting screwdriver too.
-
Boy, this is daunting. I need to think a lot before I start this.
-
EEEK! :o
Don't use the word "daunting." Or the word "intimidating." Or any other words like that which could lead down the path to saying, "Aw, the heck with this project....":D
Seriously, I'd like to see you hang in there and make a go of it. Yes, lots and lots of careful planning will be in order. Maybe trace the components onto some heavy cardstock, cut them out as templates, then puzzle out how they should all fit together. You could do all that before ever cutting actual metal.
-
I'm really hoping the manufacturers are watching our words & are thinking of prototypes that we can't produce. Personally I may be just as happy with the separate tools I'd be mixing for this project.
But back to the design, here's the list of things I'd like to have on this tool (or my dream tool).
Knipex Plier Wrench (with wire cutter if there's a way to do it)
One-hand blade (preferably with replaceable utility blade)
Detachable ratcheting screwdriver/bitdriver & at least 4 bits
Bottle opener
File (preferably diamond)
? -
I picked up an even smaller Knipex Cobra Plier today. I'm wondering if this might be a better starting point for a multitool.
-
The Cobra looks like a very capable/versatile plier too. Seems like the real bugger is going to be, how to attach different handles to it?
-
Now I'm thinking of folding the handles over the head of the plier like the SwissTool & making it a little longer to allow a longer main blade - still one-handed like the Kershaw. I like the idea of having the bit driver detachable like the (I think it was) Coleman tool. I'm having trouble drawing or describing this. The bit driver could have a fold-out extension that could fold out 90 degrees for extra leverage. The whole thing would come out of one side of the handle to enable better use & two-handed plier & driver operation. The other handle would have bottle opener, file, ?? The knife might have to be in that side as well if the bit driver is big enough to get a good grip on. I need to try to draw this.
-
Yes I found the Coleman pictures in another thread here. Imagine at least one side being a bit driver that is detachable like the Coleman cartridge.
Then imagine having a fold-out like the blade that is hollow & the width of the inside dimension for leverage. Might as well put a ratchet in there too.
Then imagine the other side having no cartridge & instead a one-hand blade, file, can/bottle opener, & awl. We could even make it user-changeable.
Does that sound good?
-
@Tom Munch said:
.....Imagine at least one side being a bit driver that is detachable like the Coleman cartridge.......Then imagine having a fold-out like the blade that is hollow & the width of the inside dimension for leverage.So it would first detach, then fold out into a T-handle driver, right?
@Tom Munch said:
....Might as well put a ratchet in there too......Excuse me, a <u>ratcheting</u> T-handle driver.
Am I following you correctly on this?
-
Yes, either a T-handle or an L-handle would work. Detachable like the Coleman. The ratchet would be in the tip.
-
I'm also thinking the plier could stick through the handle like the Crunch if it needs to.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
