(Not) My Design for a Multitool
-
I'm also thinking the plier could stick through the handle like the Crunch if it needs to.
-
So the whole thing would resemble a SwissTool (outside opening tools) with a Knipex head, a detachable cartridge ratcheting bit driver & bits in one handle, & a one-handed knife & whatever tools desired in the other handle. It would be the width of the Knipex plier at least. I would prefer the knife to actually be a replaceable utility blade. It will be difficult to get that into the handle unless it is quite a bit wider. That may mean the driver side has to be narrower to make the handle not too wide overall.
-
I see what you mean about the plier sticking through the handle.....that Knipex head doesn't lend itself very well to fitting multitool handles around it. (Multitool handles which are loaded with blades and drivers that is)
Not to pick on the Knipex head. The same difficulty would apply to any channel-lock type plier head. And yet the pictures you've shown have clearly demonstrated the advantages of that type of plier.
Hmmmm, there's gotta be a way!
-
How about folding it like a SOG Paratrooper but without the head being folded into the handle. Not ideal but could be done.
Dave
-
It's going to be a really beefy tool just to get that plier head in. That's okay with me if it is truly useful. The Cobra is lighter than the Plier Wrench & a little more compact. Either has narrow enough jaws that two good-size blades can lay alongside them on either side like the traditional multitool does.
The middle tools will have to be shorter like a Gerber, so the handle may have to be a little longer to incorporate longer tools. They won't nest as nicely as a needlenose, so we're looking for something more along the lines of the Crunch.
I'd like a short extension on the bit driver for reach too. I find I use that a lot on a bit driver. I'd sacrifice the ratchet for an extension if I had to since a detachable driver with an L or T on it would be plenty maneuverable.
I need to get a cad program or make a wood mockup to see the mechanics of this.
-
Sounds like you've put a lot of thought into this Tom.
ps ~ I remember reading somewhere about this guy who made cardboard models of his first multitool design..... :)

-
Yah, Bob, more thought than my wife would like me to. I don't really have the tools & time to do a project like this, much less the know how, but I really want to encourage manufacturers to innovate, so I can at least make a few cardboard models.
I wish we could get a few patented designs together from companies like Knipex, Wiha, Victorinox, SOG, etc. to make a multitool we can all proudly carry that gets real work done. I love the current designs, but I keep lamenting here that they are just toys when you have a real job to do. Maybe I'm missing the point of a multitool, but I want a real tool for more of the real work I do each week.
Tom
-
@Tom Munch said:
...I keep lamenting here that they are just toys when you have a real job to do. Maybe I'm missing the point of a multitool, but I want a real tool for more of the real work I do each week.What makes you feel that they are toys? What real work couldn't the multi-tool perform? Were the implements on the multi-tools inadequate toys or did you just need a tool that wasn't available in a multi-tool?
Much of the discussion in this thread has been about pliers. If you compare the head of a combination pliers to the head of a PowerLock or SwissTool, I think you'll be hard pressed to say that the PowerLock or SwissTool pliers are toys by comparison--especially if you're comparing the multi-tools to a Craftsman or Ace brand combination pliers.
The combination pliers on a multi-tool isn't a toy just because it's not a PlierWrench. A combination pliers and a plierwrench are two different types of tools with different uses. There are some jobs that are better suited for one or the other. How would you cut wire with a PlierWrench? I've held fish hooks, pulled burs from dog fur, and pulled a metal shard out of my hand with the needle nose on my SOG multi-tools. A PlierWrench wouldn't be particularly well suited for those tasks. Although a combination pliers could be used to remove nuts and bolts, it shouldn't be used for that purpose...atleast in my opinion. The PlierWrench would be much more appropriate for that task.
The wire cutters might be a poor performer on some multi-tools--not all though. I'd say most multi-tool cutters are especially poor for cutting stranded wire but some regular tools are designed for stranded or solid wire, not both.
Although some multi-tool manufacturers have made steps in the right direction, multi-tools do lack the ergonomics of dedicated pliers but that's a new topic.
If you feel that multi-tools are toys because of the quality or design of the drivers, I'd agree in some cases. Does Klein or WIHA or any other major tool company make a regular screwdriver with a head shaped like the Phillips on a SwissTool? ;) The box on a Klein screwdriver says "precision-machined tip for exact fit". Why is it the most tool manufacturers take this seriously but multi-tool manufactures tend not to take it seriously? There are exceptions (i.e. Leatherman Core Flat drivers and SOG Phillips drivers) but most multi-tool drivers lack the quality of most regular drivers.
**
BTW, I had some gift money to spend and I bought one of the Knipex PlierWrenches and some other tools. I got the PlierWrench today and love it.
Have you seen the Eifel Geared PlierWrench? I can't remember all the implements but I think it had interchangable jaws, a cutter, a flat driver, and a pry bar but I could be wrong. I have one lying around somewhere but I'm not sure which toolbox its in! :P

Back on the subject of the modified tool... I wouldn't chuck my combination plier-based multi-tools out the window, but I'd love to have a Knipex PlierWrench head and ratchet driver on a multi-tool. Bring on the designs!**

-
Supratentorial,
The pliers on multitools ARE real tools, but I don't pick up a needlenose or even a lineman's plier for most work I need to do. I pick up a pair of water pump pliers or locking pliers or even slip-joint pliers. I usually need wider jaws. That's why this thread turned that way & why I want a different plier at the heart of a multitool. As far as cutters, I think it would be feasible to have a cutter built into another type of plier, it just hasn't been done yet. I think we can design a multitool with a combination plier that is much more versatile.
I hope you're enjoying your Plier Wrench. It's quite a piece of nice design, huh?
Tom
-
It's a gem. I bought it with gift money but I probably would have bought it anyway since $36 isn't bad for a quality tool that should last a lifetime.
I don't have experience with CAD software but sourceforge might be a good place to search for freely available software. Just taking a quick peak, I found http://sourceforge.net/projects/avocado-cad--don't know if its any good though. Cardboard models are a good starting point also--architects often begin with similar models.
-
I finally started to put my ideas down for this tool. Here's a sketch.
.jpg)
-
The driver in the top snaps into the handle. Handles probably have to be longer.
-
Turns out Wiha makes a water pump Cobra plier too.

-
@Tom Munch said:
The driver in the top snaps into the handle. Handles probably have to be longer.Somehow I missed your updates when I was here earlier.
Is the driver ratcheting? Don't forget the awl...of course J-sews could make one for the bit driver!
I like the concept--esp the outside accessible tools! You got me thinking about the details though....How will you fit all the implements inside when the plier wrench is closed? On the 7", the plier wrench head is around 1.5" wide, around 3" long, and a little less than a 1/2" thick (rough measurements). What dimensions do you think will accomodate all the tools?
How will the pivots work so that the handles don't fold up when the plier wrench jaws are open? Will the pivots work like the ones on Leatherman Tools?
-
@Tom Munch said:
Turns out Wiha makes a water pump Cobra plier too.I have the 7" basic Cobra plier from Wiha. I got it free with a $100 purchase. Maybe it's just because it's the basic model but I wasn't impressed. It seems way too thin to me but I'm no expert on water pump pliers. I haven't seen the Knipex version or the top of the line Wiha versions except online. I really don't ever need a water pump plier though (it was just a freebie).
-
I've definitely not decided for sure on the mix of tools I like. I'm open to suggestions. This is just what I would use personally.
The drivers are not ratcheting. I decided that wasn't as important if the driver was detachable. Notice that both ends will hold double-ended bits, making carrying extra bits in the tool less important since you'll already have four with you. You can also get more torque with the longer handle on the short end. Obviously a ratchet would be great to have too.
I'm thinking the tool will have to be longer to accommodate the larger plier head. I haven't worked out a length. It depends on how long the driver & middle tools end up.
I think the pivots will have to lock in place at least by friction so that the handles don't fold back on themselves when opening the pliers. Most multitools including Leatherman have this kind of friction when fully open.
I'd be less likely to want an awl myself since I don't hardly use one.
Do you like the utility knife blade?
Any other suggestions?
-
Maybe the file could have an end that could double as a nail cleaner & awl?
-
The can opener could have an awl end on it also.
-
The utility knife blade would be a neat choice but because of the large size of the tool it might be dwarfed unless it's also removable (like the driver). I don't carry a knife other than the one in my multi-tool. I could accomplish most tasks with a utility knife but I do use a knife when cutting an apple for an afternoon snack. I'm sure I could manage eating the apple without a knife though. ;) And since this is more of a utility tool, I think a utility blade is a fitting choice.
Bare minimum, I'd want a blade, a bit driver, and a file. For tool selection, the more the merrier in my opinion. The number of tools that fit will depend a lot on the design. Either the handles will need to be really thick so that the tools fit outside of the plier wrench head or the handles will need to be really long. The width of the handles will also need to be really wide or the plier wrench head will need to stick out of the handles. It won't be easy to make this an ergonomic tool. I think you've got your work cut out for you!



-
Sorry I missed seeing your sketch earlier Tom.
I like the utility knife idea. I really like the detachable L-shapable screwdriver idea. And of course I like the Plier Wrench head.
Thinking about the difficulties involved with making the plier head fit within the folding handles....really makes a guy tempted to go with non-folding handles though.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login