CyberTool owners thread
-
BTW how easy would it be to change the scales? Are they glued on or do they just snap on/off?
I don't normally like the translucent scales, but these Silvertech ones look great!: http://swissknifeshop.co.uk/shop/victorinox-scales-for-91mm-swiss-army-knife-genuine-swiss-victorinox-handles/
-
@hiraethus said:
have a read of this: /topic/9808

-
What I'd really love is a Cyber "Solo" - just the bit driver and bit holder layer, as I have better knives I'd rather carry for knife duties - how feasible would that be to Mod? Realistically, for now at least, I'll probably just get the CT 29
-
@Oxford_Guy said:
2) It's not essential, but how easy would it be to swap out the corkscrew (which I don't like on my SAKs) for the Phillips #2 screwdriver? Would potentially mean I could carry one of the other bits available (e.g. Small hex ir torx) instead of the #2 bit.?I would advise against this, actually. The the backspring phillips is not a good substitution for the #2 bit. The bit has considerably better grip, better fitment, and better reach.
My scale color preference is black, but I like the translucent red that it comes in just fine.
-
have a read of this: /topic/9808
So the scales should just pop on/off? Will I still be able to access the pen and pin with aftermarket scales?

-
Yes, they'll just pop off. It's a bit easier and you're less likely to damage them if you warm the knife gently first.
As long as you get plus scales then you can fit the pen. The pin hole has been on all recent non-plus scales I've seen lately. Though it depends what you mean by aftermarket - there are scales made by companies other than Victorinox out there.
-
@hiraethus said:
Yes, they'll just pop off. It's a bit easier and you're less likely to damage them if you warm the knife gently first.As long as you get plus scales then you can fit the pen. The pin hole has been on all recent non-plus scales I've seen lately. Though it depends what you mean by aftermarket - there are scales made by companies other than Victorinox out there.
Thanks. Do you mean to warm the whole of the knife you're taking the scales off, or just the blade of the knife you're using to pop-off the scales?
-
The whole knife. It softens the plastic scales a little.
-
@hiraethus said:
The whole knife. It softens the plastic scales a little.Okay, thanks
-
@Oxford_Guy said:
What I'd really love is a Cyber "Solo" - just the bit driver and bit holder layer, as I have better knives I'd rather carry for knife duties - how feasible would that be to Mod? Realistically, for now at least, I'll probably just get the CT 29It would be dreamy except I cant see how the bit driver layer can accomodate a corkscrew/phillips and this would leave an unsightly gap in the rear scale.

-
BTW does the bit driver on the Cybertool have a proper half-stop (semi-lock) at the 90 degree position, like the bottle opener tool? It's not clear from the description on SAKWiki: http://www.sakwiki.com/tiki-index.php?page=Bit+Driver
It just says "The driver is designed for use in the fully open or fully extended position, as well as in the 90deg position where it forms a right-angle with the knife handle.", but I don't know whether that means there is a proper half stop at 90 degrees
-
Yes, it has a half-stop.
-
@hiraethus said:
I don't think I've posted my latest SAK in this thread:
<a href="https://flic.kr/p/Md785E" target="_blank" rel="noopener noreferrer"><img src="https://c3.staticflickr.com/9/8215/29673047002_64410fca47_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>Nice Hi
The scales make it seem so much fancier 
-
I don't think I've posted my latest SAK in this thread:
<a href="https://flic.kr/p/Md785E" target="_blank" rel="noopener noreferrer"><img src="https://c3.staticflickr.com/9/8215/29673047002_64410fca47_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>Nice Hi
The scales make it seem so much fancier 
Where did you get those scales from, they look different from the "pure white" scales I found here: http://www.swisstool.co.uk/st/CyberTool-29/
The cross looks different for a start, see examples here: http://www.swisstool.co.uk/st/spartan-white-swiss-army-knife/
-
-
@Oxford_Guy said:
Where did you get those scales from, they look different from the "pure white" scales I found here: http://www.swisstool.co.uk/st/CyberTool-29/The cross looks different for a start, see examples here: http://www.swisstool.co.uk/st/spartan-white-swiss-army-knife/
They were a gift from a member in the US - but as far as I can tell they're totally standard white plus scales with the same cross as all my other SAKs.
-
Where did you get those scales from, they look different from the "pure white" scales I found here: http://www.swisstool.co.uk/st/CyberTool-29/
The cross looks different for a start, see examples here: http://www.swisstool.co.uk/st/spartan-white-swiss-army-knife/
They were a gift from a member in the US - but as far as I can tell they're totally standard white plus scales with the same cross as all my other SAKs.
With fanciness added by fairies I assume

:D
-
New page banana man dance

-
Think I may actually just get the Cybertool 29 in jelly red, then changes the scales later, as can't decide on white, solid red or black currently (or maybe even something fancy like titanium).
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
Much prefer them to the translucent blue that it was fitted with.