Coloring SAK Scales
-
@Noa Isumi said:
I got my Silver-Tech scales in. They are now pickling themselves in a ball jar full of white vinegar.
I origonaly put them in a solo cup, but then re-read your first post saying 3days. Something with a lid became a good idea. This will be with no aditional heat, so about a 74f room temp. Not sure if temp is a factor but we'll find out.
Just have to wait and see.If this doesn't work I will move on to stronger solvents and paint thinners. I just want to start out slow and see what happens.
Looking forward to the results

Be careful with organic solvents. The scale material is not very solvent-resistant, even with mild solvents like alcohol. That's why I was surprised by Etherealicer's discovery that you can remove the paint without damaging the plastic.
-
@Noa Isumi said:
I got my Silver-Tech scales in. They are now pickling themselves in a ball jar full of white vinegar.
I origonaly put them in a solo cup, but then re-read your first post saying 3days. Something with a lid became a good idea. This will be with no aditional heat, so about a 74f room temp. Not sure if temp is a factor but we'll find out.
Just have to wait and see.If this doesn't work I will move on to stronger solvents and paint thinners. I just want to start out slow and see what happens.

I'm a bit busy at the present so it is great to see, someone else picks up where I left.
-
@Noa Isumi said:
I got my Silver-Tech scales in. They are now pickling themselves in a ball jar full of white vinegar.
I origonaly put them in a solo cup, but then re-read your first post saying 3days. Something with a lid became a good idea. This will be with no aditional heat, so about a 74f room temp. Not sure if temp is a factor but we'll find out.
Just have to wait and see.If this doesn't work I will move on to stronger solvents and paint thinners. I just want to start out slow and see what happens.

I'm a bit busy at the present so it is great to see, someone else picks up where I left.
Addendum, if you have any place warmer, put it there. Assuming it is a purely chemical reaction then 10°C will increase reaction will double the speed.
If you can't see any result add a big spoon of table salt and give it some more time. -
It has been 5days +/- an hour or so
The results are underwhelming. There are visable signs of the coating getting thiner, although only a little bit of one edge has stripped completely.
This would indicate that temperature is a factor, and perhaps that the dye changed the ph of the vinegar to be more aggressive.Since I dont realy have some place warmer than a windowsill I will add some salt as suggested.
1tbs - 16oz vinegar



-
Well, it is a result, just not enough but it is the right path. Maybe the salt will help.
-
Since vinegar + salt have been taken care of I thought I try some other acids.
- Coke
- Lime juice
Time to wait...
-
Sorry I havent posted an update. It has been 7 days since I added the salt. When I added it and gave the jar a shake some more of the thinner bits on the ribs pealed off. I'm pretty sure that was just due to the agitation.
Today I remembered to look in on it and there is progress. The salt/vinegar mix does work cold if you have the time to wait. As stated before I keep my place is around 73f (22c) this time of year. Seems I am committed to following the cold slow road since I am really curious now just how long it will take.
It will be intresting to do another set in the summer when it is 90-100+F on my front porch and see how much quicker it goes.So here's some update pics. As you can see the cutout scale is clearing up much quicker and is completely clear in many places. The shield scale is thinning quite a bit and you can see light throughout large portions. When I started I had a feeling the coating was thicker on this one; seems I was right.
After taking these I mixed a fresh solution same as before, roughly 16oz vinegar/ 1Tbs salt.

-
@Noa Isumi said:
Sorry I havent posted an update. It has been 7 days since I added the salt. When I added it and gave the jar a shake some more of the thinner bits on the ribs pealed off. I'm pretty sure that was just due to the agitation.
Today I remembered to look in on it and there is progress. The salt/vinegar mix does work cold if you have the time to wait. As stated before I keep my place is around 73f (22c) this time of year. Seems I am committed to following the cold slow road since I am really curious now just how long it will take.
It will be intresting to do another set in the summer when it is 90-100+F on my front porch and see how much quicker it goes.So here's some update pics. As you can see the cutout scale is clearing up much quicker and is completely clear in many places. The shield scale is thinning quite a bit and you can see light throughout large portions. When I started I had a feeling the coating was thicker on this one; seems I was right.
After taking these I mixed a fresh solution same as before, roughly 16oz vinegar/ 1Tbs salt.Looks like it works, just a lot slower than expected, maybe a daily shake would speed things up.
Now I have to go home and look at mine :ahhh -
Just a quick update photo
I changed out the solution again this afternoon

-
@Noa Isumi said:
Just a quick update photo
I changed out the solution again this afternoonSo, it takes a lot longer BUT it seems to be working

-
@Noa Isumi said:
Just a quick update photo
I changed out the solution again this afternoonSo, it takes a lot longer BUT it seems to be working

It does indeed. They're looking good Noa.

-
I got side tracked and forgot to check the scales till last night. They have finished cleaning up and are completely clear as of some time in the last couple days. I will post a pic later tonight.
So that was about a month in vinegar and salt at a relatively cool temp with weekly solution change. -
@Noa Isumi said:
I got side tracked and forgot to check the scales till last night. They have finished cleaning up and are completely clear as of some time in the last couple days. I will post a pic later tonight.
So that was about a month in vinegar and salt at a relatively cool temp with weekly solution change.Awesome... neither lemon juice nor coke produced any result worth reporting.
Now we need phase 2... putting color back on :P
-
My plan is to mask off the face of the scales and hydro-dip the backs with swirled enamel
-
@Noa Isumi said:
My plan is to mask off the face of the scales and hydro-dip the backs with swirled enamelOh, that sounds interesting. Looking forward to seeing how that comes out.

-
Indeed, this does sound very cool for sure!
I can't wait to see the newly clear scales, and the swirled paint!
Def
-

Any update on this awesome project? or did I missed something somewhere?
-
Any update on this awesome project? or did I missed something somewhere?
Not on my part... I have been rather busy, but hopefully Noa Isumi will share his results soon.
-

Any update on this awesome project? or did I missed something somewhere?
Not on my part... I have been rather busy, but hopefully Noa Isumi will share his results soon.
Hi guys. I'm a newbee here and guess I missed something on the coloring of scales. I LIKE the red toothpick, though. How was that done? Question 2 (maybe good for a different thread?) Has anybody MADE scales out of "stabilized" wood? Does it act more like plastic than wood? BTW, I love this forum.
-

Any update on this awesome project? or did I missed something somewhere?
Not on my part... I have been rather busy, but hopefully Noa Isumi will share his results soon.
Hi guys. I'm a newbee here and guess I missed something on the coloring of scales. I LIKE the red toothpick, though. How was that done? Question 2 (maybe good for a different thread?) Has anybody MADE scales out of "stabilized" wood? Does it act more like plastic than wood? BTW, I love this forum.
I have two pieces of stabilised birch burl that I am planning on using on a quick project. I plan on gluing them on today/tomorrow but I won't be able to shape them until some time next week when I will return with my findings.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



