SAK scissor sharpening ?
-
On this subject, and considering the relative delicacy of small scissors, here's a thought:
There used to be a sewing mill near here, and they employed several sharpeners for the scissors used in the plant. From what some of the employees have told me, the sharpeners used to sharpen the scissors by cutting medium to coarse-grit sandpaper. Supposedly this limited the blade wear from more aggressive sharpening methods, ensured an edge-long sharpening and prolonged scissor life . I don't know whether this works, but I plan on trying it. I currently use a ceramic scissors sharpener sold at Wal-Mart. It works moderately well (it gets the middle of the blade sharp, but the hinge-end and tips stay relatively dull).
Just thought I'd pitch this out to see if anyone had tried the sandpaper trick.
Luck, Bill
-
I use a sharpmaker, it seems to work OK. Admittedly on something as heavy as the Champ its a bit of a pain but certainly doable.
Neil
-
I've yet to need to sharpen the scissors, so your on your own I'm afraid :-\
-
Cheers guys
Not sure about the sandpaper method I cut sandpaper once with my 'Champ it left them gritty and took a while to clean but thanks for the help
-
I had heard about cutting sandpaper years ago.... It doesn't work.
-
Cheers guys
Not sure about the sandpaper method I cut sandpaper once with my 'Champ it left them gritty and took a while to clean but thanks for the help
You don't sharpen it by cutting sandpaper heh. Use sandpaper on some hard backing and sharpen like you would with a benchstone.
I have 600 grit sandpaper double sided sticky tape and lollipop sticks on standby and will update with results
-
No, I had heard that CUTTING the sandpaper made the scissors sharper by the act of the abrasives passing the cutting edges. Perhaps the ladies from the mill saw the sharpeners using a strop or something. Like I said, I've never tried it, just threw it out there.
Bill.
-
I dont like the sandpaper because it scratches the metal around the blade.
My secret method is:If its and old scissor fist tighten the single screw,
Then fold up some aluminum paper, from 3 to 4 times and cut the aluminum with the scissor, super most excelent result!!! -
Aluminum paper... like tin foil? ( Reynolds Wrap?)
-
Yeah, I've heard you can do it with aluminum cans too. =o
-
Exactly tin foil/Reynolds rap.
Depending on the scissor size/strength do 2 to 6 bends and the cut.
Here is one video, http://www.metacafe.com/watch/932701/sharpen_scissors_with_aluminum_foil/
Enjoy.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login