what tools are under rated?
-
it seems to me leatherman, swiss tool, and sog get all the glory. I can under stand why with leatherman and the swiss tools. what tools doo you think are under rated?
bear jaws are nice and I think more useful than my gerbers. so these might be a little under rated but the tools I thing are totally under rated are:
tradesman shears, these shears cut paper to thick zip ties. my swiss siccors have notches from cutting zip ties and other stuff but the shears really hold up. the phillips driver sucks though.
schrade adjustable plier. this plier is the ultimate toll for construction and machine operators. the impliments are not as good as leatherman but the pliers have done a couple jobs that my other tolls can't. the pliers on most tools are too small for large objects.
visegrip toolbox. schrade made some vise grip tools and they were market under the schrade name primarily. one tool was marketed unter the vise grip name. this is the vise grip tool box. the others were named tough grip or something. anyhow, the vise grip tool box the largest plier opening of any locking plier multi tool. I have used doing some work on a friends house and at work. it is my favorite locking tool, even more than the crunch and kershaw. all the tools above have spent time in my edc rotation and the shears and adjustable pliers are still in the edc rotation.
another tool I am just starting to use but like is the paul chen tool. I plan on using it a lot in the next couple weeks and will decide then if it is under rated.
what do you think? -
The Bear Jaws tools are definitely under appreciated, as is the Schrade/Visegrip Toolbox you mentioned. Maybe simply because not many folks have had an opportunity to own them?
Another series of tools that doesn't get much air time here is the stuff from SeberTech. (Now IDL Tools) The little M4 pliers tool with locking blades has a lot of great features. :)

-
I think the Zilla and Guppie are underrated. I like those tools and I think they are pretty handy as far as minimalist tools go. I just got a Li'l Guppie and Zilla Jr, so I'll be trying them out and seeing if they are any better, because some folks find the Zilla too heavy/awkward.
Bear isn't so much underrated as unknown. The folks at Bear don't do much to promote their tools, apparently preferring to sell them to the promo markets. I get more calls and emails asking about the Crescent Toolzall Pro than I ever did about Bear, even though Bear makes the thing.
I also think the Crunch is pretty underrated. It's a really handy tool, with all your basic needs and a set of locking pliers that come in really handy sometimes.
Def
-
Believe it or not - Your regular Swiss Army Knife seems undervalued

A lot of people refer to something useful as the "swiss army knife" of it's field - but despite it being a household name for VERY USEFUL not many people actually carry one ???
and even amongst multis they seem to be passed over for them big shiny plier tools.
I find a use for my Kick every day, but I use the heck out a SAK too.
Fess up,
how many of you blokes are NOT Swiss carriers?
-
Def comes with the point That I agree with. It does not have to be a small company to be underrated for a tool.
And yes the crunch is certainly one of those. I would certainly give up my Mini for my crunch, and I find the Mini to be underrated. I love the smaller tool with the big features. However the crunch has something the company did right, Locking pliers. I love the crunch and it is perfect for a bunch of stuff.
-
I don't want to get hung up on one tool - but I can't love the Crunch.
I don't know what it is. The tool selection is not any sparser than the kick's, which is now my EDC.
I love vice grips...
but I don't feel much for the Crunch.
-
Well that is like me with the OHT I dont like the serrations. Does not mean it dont work, but it dont just sing.
-
If anything I would say the Crunch is OVER rated. Almost everyone who handles it is impressed with the clever engineering, and talks about how great it is, but how many foks actually carry one?
-
@J-sews said:
If anything I would say the Crunch is OVER rated. Almost everyone who handles it is impressed with the clever engineering, and talks about how great it is, but how many foks actually carry one?I carry one sometimes at work. I use it to clamp down fluid lines by putting a piece of rubber around the line so I don't damage it when I squeeze the line. I've also used it a few times to remove some stripped bolts and hold on to stuff that I'm grinding.
-
@Nomad said:
Believe it or not - Your regular Swiss Army Knife seems undervalued
A lot of people refer to something useful as the "swiss army knife" of it's field - but despite it being a household name for VERY USEFUL not many people actually carry one ???
and even amongst multis they seem to be passed over for them big shiny plier tools.
I find a use for my Kick every day, but I use the heck out a SAK too.
Fess up,
how many of you blokes are NOT Swiss carriers?
I'm with Nomad on this one... Well put dude.
-
@J-sews said:
If anything I would say the Crunch is OVER rated. Almost everyone who handles it is impressed with the clever engineering, and talks about how great it is, but how many foks actually carry one?I didn't carry mine for the longest time, but in the last few months it has become part of my EDC rotation. It often lives in my Pock-Its XL for when I go to work. I find it's actually pretty handy.
Def
-
I don't edc the crunch because I edc a vise grip.
-
I have yet to get a Crunch, it will have to be something I pick up this year.
I do agree with the Guppie and the Zilla be under rated. I totally support ID Works and thier efforts and think that everyone should give these little wonders a try.
-
Without doubt the Bear/Crescent items must be the great unknowns of the multitool world. The Schrade stuff would also be up there, too.
-
@Nomad said:
Believe it or not - Your regular Swiss Army Knife seems undervalued
A lot of people refer to something useful as the "swiss army knife" of it's field - but despite it being a household name for VERY USEFUL not many people actually carry one ???
and even amongst multis they seem to be passed over for them big shiny plier tools.
I find a use for my Kick every day, but I use the heck out a SAK too.
Fess up,
how many of you blokes are NOT Swiss carriers?
Very good point mate

-
Juice CS4 - copes with a lot of jobs as well as a larger tool would. Also agree with Nomad about SAKs.
-
the cs4 and xe6 are my favorite juice models.
-
The SURGE is extremely underrated! It can do more than any MT! Despite a few unrefined edges and some uneven bolsters it is an excellent tool!
-
@Leatherman123 said:
The SURGE is extremely underrated! It can do more than any MT! Despite a few unrefined edges and some uneven bolsters it is an excellent tool!I wouldn't say the Surge is underated, it is one of the most popular here and is certainly mentioned more than most (thanks to you :D).
-
I got all happy when I read that LOL! I suppose your right.. It's only underrated by the members in the UK! :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



