(Not) My Design for a Multitool
-
I was looking over this thread tonight and was wondering, couldn't we try to draw a blueprint for the tool you guys design? What about the possibility of applying for a patent? Of course, we'll have to come up with a name...
... and in honor of Tom's original idea... I'm thinking the Multitool.org "Munch" :)
-
665ae,
That's very kind of you. We are using other toolmakers patented designs, so I don't see how we could patent it. We could make several for our own use though. I'm betting the first few will cost a couple hundred dollars or more to do, & I'm sure they'll be a little clunky.
Tom
-
That's very kind of you. We are using other toolmakers patented designs, so I don't see how we could patent it. We could make several for our own use though. I'm betting the first few will cost a couple hundred dollars or more to do, & I'm sure they'll be a little clunky.
Tom
Tom, Have you finished the prototype?!?

-
I've been having to put this idea on hold for a while. My mother-in-law finally passed away last week, so I've had a lot to do with that, & I'm starting my summer contract this weekend & will be mostly out-of-touch in the mountains of Colorado. I had hoped to at least have a cardboard model by now.
Tom
-
Sorry to hear about your loss Tom. Silly things like multitools quickly become irrelevent compared to losing a loved one. Please pass our sympathies along to your wife as well.
Bob
-
Yeah Tom... sorry to hear about your misfortune. If you'd like, you can have my mother in law as a replacement? Really, it's no trouble, I've already put the stamp on her forehead and stuffed her in a mailbox. You should have her in 4-6 weeks...
Def
-
She had been terminal for almost 2 1/2 years, & wanted to go, but it was still sad to finally lose her.
Tom
-
My deepest sympathies Tom.
Is your father in law still alive? Both of my grandfathers passed away a few years ago now, and I remember at the time I felt most sad for my grandmothers who were left without companions at a stage in life where they were quite ill themselves and so needed constant help, normally provided by their husbands.
Just a few weeks ago one of my grandmothers passed away, and while it does bring a lot of sadness, two factors helped ease the pain:
- she had been ill for a while and near death's door for a while too, so everyone had had a chance to spend a lot of time with her, and take care of her, and say goodbye, so it was not unexpected as it was with her husband.
- she wasn't leaving behind her husband, she was going to meet him instead, and so what happened was best for her, everyone has to pass away some time or other, just pray that you go in the best way possible.
I am sure you will find yourself to be a mountain of support for your wife who must need you at a time like this. Forget about tools for the moment, times like this are best spent mind and body with family.
Again, my deepest sympathies.
-
My condolences.
-
Thanks, guys.
Yes, my wife's dad is still alive. He's declining too, but he should have a few years left we can fish & tell tall tales over a beer.
I've lost quite a few folks who I was close to over the last few years, so I'm not as sad as I might be at losing my wife's mother. I buried my own father just a year & a half ago. This is all just part of life I suppose. As a performer I have to push it down so that I can smile & give my all on stage. I find time to grieve though - we all do in our own way.
Tom
-
I'm still working on my cardboard model of this tool. This summer has been tremendously busy - been working 7 days a week since Memorial Day.
Tom
-
I'm ready to get back to this now. I'm sorry if I've been leading folks on a bit. I need to find a good machine shop to do the work for me. I'm still afraid it will be a monster & very unuseable, but it's worth a shot.
Tom
-
Yay!!

-
@Tom Munch said:
Now how to add wire cutters into that jaw - either deep in the jaw or on the back somehow like I've seen on other tools.Any ideas, guys?
Tom
Hi Tom,
I saw some wire cutters that work in a similar manner to the wire strippers. I'll try to explain it here. Let me know if it isn't clear.
- open up the jaw about 5-10 degrees.
- (with a carbide drill bit) drill a hole at angle into the jaws (away from the pivot point/rivet). The hole must be drilled tangent to the travel of the jaws. (this is getting to hard to explain).
- anyway, if you then stick a wire in that same hole and close the jaws, it should cut the wire.
If you drilled a hole straight through, that would work, but and angled hole acts as a wire stripper also.
Does that make sense?
??? -
trickknife,
I've read your description several times, but I'm still not picturing what you're describing. Do you mind sketching it a bit?
Tom
-
Here's an attempt at drawing in 3D.
In "cutter 2" the jaw is pivoted so that the jaws will be closed (disregard the sloped hole for a second).
You open up the jaws slightly (about 5 or 10 degrees) and then drill a hole at an angle as shown in the image "cutter 1".
To use the wire cutter, you open the jaws up to this position (where you can see through the two holes) and insert your wire.
Then you close the jaws and squeeze on the handles. It should go back to the position in "cutter 2" and the wire should sheer off.
Is that better?
Rick


-
trickknife,
That's a good idea, but I don't know if either of the Knipex heads I'm looking at have sufficient overlapping material to do this.
-
Maybe a wirecutter could be implemented into the back where the tools scissors a bit.
Tom
-
A carbide insert could even be fastened into the jaws somehow I think.
Tom
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



