Has anyone ever managed to ...
-
The scissor spring tang won't engage after I dropped my Surge off of a 12' ladder last week. It landed directly on the pivot at the scissor side. The scissors lock open, but the independent spring won't engage anymore. The pivot isn't bent, so I am a little confused as to why it is behaving that way. I haven't taken it apart yet to see what happened, but I'll probably send it in for repair, since I have no shortage of tools.
-
@gerleatherberman said:
The scissor spring tang won't engage after I dropped my Surge off of a 12' ladder last week. It landed directly on the pivot at the scissor side. The scissors lock open, but the independent spring won't engage anymore. The pivot isn't bent, so I am a little confused as to why it is behaving that way. I haven't taken it apart yet to see what happened, but I'll probably send it in for repair, since I have no shortage of tools.Exactly what happened to mine though I don't remember dropping it!!
Just sent it in and it was replaced no problem although I preferred the older plier head with the fine serrations! -
The scissor spring tang won't engage after I dropped my Surge off of a 12' ladder last week. It landed directly on the pivot at the scissor side. The scissors lock open, but the independent spring won't engage anymore. The pivot isn't bent, so I am a little confused as to why it is behaving that way. I haven't taken it apart yet to see what happened, but I'll probably send it in for repair, since I have no shortage of tools.
Exactly what happened to mine though I don't remember dropping it!!
Just sent it in and it was replaced no problem although I preferred the older plier head with the fine serrations!Thank you for replying, Jaypeebee!

Now I'm ultra curious as to why the scissors would do that. :ahhh
I'm guessing a dimple in either the scissor pivot or the spring pivot that got mashed when I dropped it, and in your case, wore out from use maybe?.

-
@gerleatherberman said:
The scissor spring tang won't engage after I dropped my Surge off of a 12' ladder last week. It landed directly on the pivot at the scissor side. The scissors lock open, but the independent spring won't engage anymore. The pivot isn't bent, so I am a little confused as to why it is behaving that way. I haven't taken it apart yet to see what happened, but I'll probably send it in for repair, since I have no shortage of tools.Check the screw--I noticed my Surge's scissor spring won't engage, and found out it was because the screw loosened due the the BO coating wearing in that area. I've got to get some replacement security Torx bits of the right size--I lose or break those every time I use them.
-
It wasn't from over use, I hadn't used the scissors very often!
I didn't bother investigating, just sent it back because I'd broken the Awl off as well
-
@CallsignBadger said:
Looks like you have some horror story telling, dtt
[emoji2]Fixed
Sent from my iPhone using Tapatalk
-
Looks like you have some horror story telling, dtt
[emoji2]Fixed
Sent from my iPhone using Tapatalk
Thanks -
So felt brave during a bought of insomnia. Took the pivot apart and discovered my theory was close to what happened. The drop broke the tiny engagement pin off of the scissor spring on the inner area. You can see the little piece right above the spring in the first photo. Used a cut off piece of a strong safety pin to make a new piece to put in the tiny hole. Slapped the Surge pivot back together and everything seems to operate properly. $8 shipping charge avoided.

On a side note: Used my ole' blunt modded ST200 to cut the pin and file it. I forgot how much I liked the ST200BN. :ahhh



-
Nice job GLBM

-
Well done !

-
Thank you, Wspeed and SteveC!

-
Yeah, nice job

-
Thank you, Jaypeebee!

-
Cool fix, GLBM

Like the BN ST200


-
@CallsignBadger said:
Cool fix, GLBM
Like the BN ST200


Thank you, CSB!

The BNST200 is probably my favorite blunt nose MT. Too bad LM doesn't make any BN MTs.

-
The Crunch qualifies as BN
-
@CallsignBadger said:
The Crunch qualifies as BNThe sad part is that I own a Crunch.

Thank you for the correction, CSB!
-
:D You’re welcome

-
I've never managed to break one like that, but my family members sure have.
I've carried individual Leatherman tools for years at a time, and I've only broken two that I felt shouldn't have broken(the other few were my fault!). I snapped a Wave blade once, and I broke the tip of the small flathead on my Blast about 10 years ago. Both of those should not have happened and LM warrantied them both times.
My current EDC Rebar has been through absolute hell and back, with nary a scratch to show for it. Ok, it's scratched all to hell but it is still complete and functioning. I've put more pressure on the pliers than a cast plier head should be able to take. I've pried with the drivers like we all do, and they're still there.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login