Seeking Rebar modding advice.
-
Alright laddies!
After a long wait the stuff from Loki finally arrived, and here’s what I mcgyvered together!

So I wanted to keep all the full sized screwdrivers bit still have the small and large bit driver.
And here’s why..

I already have this homemade redneck fabulous 3D bit driver that I made ages ago for my Charge TTI, so I wanted to be able to use both 2D and 3D bits.


And that is especially when Torx and Hex are becoming more and more common, especially on European cars and different electronics

And it all fits nicely into my charges sheath as well!
And most importantly; no knives means it is legal to carry in public!
Sent from my iPhone using Tapatalk
-
Even works with my small sockets...

There’s these long bits too...

And I can even go down this route as well if needs be...

I hope it this forms a better picture of what I had envisioned and what I was hoping to achieve with this “build” / mod
Sent from my iPhone using Tapatalk
-
Looks good MMR

-
Thank you sir!

Sent from my iPhone using Tapatalk
-
Awesome homemade bit adaptor MMR, how did you make it?

-
@Don Pablo said:
Awesome homemade bit adaptor MMR, how did you make it?
Woodies sells these “onsite” brand bit sets for €5, which comes with a regular bit adaptor for like a power drill.
I took that, and measured up the size of the leatherman 2D bits, and grinder it down on both sides to my measurements
I don’t know if that makes sense?
Sent from my iPhone using Tapatalk
-
Oh yes MMR, it makes purrfect sense :D
I'll have to try that out. I may need to go for a somewhat higher powered grinding wheel... >:D -
Just for inspiration; it looks like this up close

One thing to note, if you decide to have a go yourself; the 2D bit driver has this little locking arm; which it uses to secure the bits in place:

So cutouts like I did here are needed for the bit adaptor to lock in place, as seen below:

Here’s a better picture of the cutouts:

Sent from my iPhone using Tapatalk
-
Very nice MMR

-
Excellent idea MMR

-
“Pictures says more than 1000 words”
- Somebody
So you can buy these bit kits for like €5 or less depending on where you live, in my case they can be found from brands like; Rolson, Onsite, amtech, bluepoint etc. ...just whatever cheap brand your local hardware store carries...

Anyway..
They all usually come with a bit adaptor, driver thingy for a power drill. That’s what I used to make my 2D-to-3D bit adaptor.
The way I made it was pretty crude and “no effs given”
I measured up a 2D bit..

As well as the 2D bit adaptors insert (if that’s the correct term for it?)

And then just went to town on my grinder, until I got the hit the right measurements:
In my case I used a modified “multi function sharpener” from Aldis workzone brand.
When I say “modified” I mean; it was designed for sharpening like drill bits and scissors, but I modified it to be able to function more as a grinder instead.

Anyway; here’s the final result side by side with a similar bit adaptor I started out with:


For those with sharp eyes; I decided to add a more personal touch to mine with a diamond-like finish to it.
Sent from my iPhone using Tapatalk
-
Nice work on the modded Rebar and the bit adapter
Nice work in making it UK legal and keeping it very functional
What about the awl though
I guess that would depend on the officer 
-
Nice.
That adaptor wasn’t done the way I expected, so, interesting. -
@Poncho65 said:
Nice work on the modded Rebar and the bit adapter
Nice work in making it UK legal and keeping it very functional
What about the awl though
I guess that would depend on the officer 
All this time and I actually never thought about the awl even once.
I’m going to swap the awl with the can opener for now until I decided what else to do.
Thank you for mentioning that

Sent from my iPhone using Tapatalk
-
Nice work on the modded Rebar and the bit adapter
Nice work in making it UK legal and keeping it very functional
What about the awl though
I guess that would depend on the officer 
All this time and I actually never thought about the awl even once.
I’m going to swap the awl with the can opener for now until I decided what else to do.
Thank you for mentioning that

Sent from my iPhone using Tapatalk
Quote from the Irish statue of law:
http://www.irishstatutebook.ie/eli/1990/act/12/enacted/en/print.html“
PART IIIOffensive Weapons
Possession of knives and other articles.
9.—(1) Subject to subsections (2) and (3), where a person has with him in any public place any knife or any other article which has a blade or which is sharply pointed, he shall be guilty of an offence.”
I can actually see that the awl can fall into that category.
Kind of a vaguely stated law though, even ones keys or a pen can be “sharply pointed”?
Sent from my iPhone using Tapatalk
-
Well, yes, but that's the problem with many laws of this kind. UK knife laws are similarly worded, IIRC. It all comes down to the police officer's judgement. Now, I'll accept that most police officers are reasonable persons and would not say that, say, your metal Parker pen constitutes a sharp object in terms of the law. But I am sure there are police officers around that, say, don't like Mondays and allow this to impair their fair judgement in less clear-cut cases. So, even as a citizen willing to abide by the law, you can never be sure you won't be charged with an offence.
The awl is a case in point. However, so are can openers (!) especially if provided with a cutting edge and sharp tip, such as the one on the Rebar (and some modders sharpen this to make a good package opener). If you take this further the thickness/width-to-length ratio of the small Rebar screwdriver might make this "sharp". Or needlepoint plier heads such as on a Wave.

(If you found any puns, these are intended :D)
-
Point taken!
I will admit that the awl is sharply pointed, but the can opener is more round tipped.
But either way, I might have a go at rounding it off more or swap something in instead.
Haven’t decided yet [emoji846]
Sent from my iPhone using Tapatalk
-
Glad I pointed it out
as I am sure there (like here) you have both reasonable officers and those thay are a bit more gung ho :D Hate for you to lose your Rebar over a technicallity

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

