Combo tool vs opener layer
-
@Mextreme said:
Combo tool.
The Yeoman is perfect for a modern EDC.
It's hard to find a can that doesn't have a pull ring nowadays, at least where I am and the straight head screw is almos extint so I ca sacrifice them to get the in-line Philips in only three layers and combo tool works o.k. for the odd cases i need can opener or straight head.
victorinox should revive it.Ah the Yeoman.
Rather then wait for Vic to come to there senses I decided to have one built. Well sort of.
More to follow in the very near future of 2015.

-
@HarleyXJGuy said:
Rather then wait for Vic to come to there senses I decided to have one built. Well sort of.More to follow in the very near future of 2015.

Wow. Man, you got the SAK bug BAD.

Kinda like crack, aren't they?
-
@Lynn LeFey said:
@HarleyXJGuy said:
Rather then wait for Vic to come to there senses I decided to have one built. Well sort of.More to follow in the very near future of 2015.

Wow. Man, you got the SAK bug BAD.

Kinda like crack, aren't they?
No not at all.
Heck I don't even own one SAK.

-
@hiraethus said:
Give me a Climber over a Compact any day.A climber has no tools for small phillips screws. The Compact does (mini screwdriver.)
-
Give me a Climber over a Compact any day.
A climber has no tools for small phillips screws. The Compact does (mini screwdriver.)
Undertaker honors his name 4 years later, :D
-
I got a used Compact on Monday. I used to say “Opener layer awl the way”, but now I can see the appeal of the Combo Tool.

-
Give me a Climber over a Compact any day.
A climber has no tools for small phillips screws. The Compact does (mini screwdriver.)
You can get the mini screwdriver separately, for all your corkscrew SAKs.

-
Pabs, are you an undertaker too?

-
Give me a Climber over a Compact any day.
A climber has no tools for small phillips screws. The Compact does (mini screwdriver.)
Huhh.... you do know you can add the mini screwdriver to <u>any</u> Sak with a corkscrew, right....?

:D
@Don Pablo said:
I got a used Compact on Monday. I used to say “Opener layer awl the way”, but now I can see the appeal of the Combo Tool.
+10

I was never drawn to the Compact much, and was pretty much "anti-combo tool", but since carrying the Compact this last month my opinion of it and the combo tool changed quite a bit. Yes, it will never be as tough as the bottle opener, but for my regular EDC i can get by easily with it.
That being said, i'm still carrying the Climber and Compact, as i still can't bring myself to decide on carrying one over the other....

I know... i need help.... :ahhh
-
@Mechanickal said:
Pabs, are you an undertaker too?
I’m me. Who else are you thinking that I am doppelganging as?
-
Huhh.... you do know you can add the mini screwdriver to any Sak with a corkscrew, right....?

I prefer the default configuration. Modding and adding tools ruins the look of the knife.
Er.... modding? It’s literally screwing a little piece of plastic into the corkscrew.

You can buy lots of genuine corkscrew screwdrivers on some online stores that sell scales and such.
If a an employee in a Vic store can do it, it’s not modding. :)Are we talking about the same thing?
IMHO, of course
-
Give me a Climber over a Compact any day.
A climber has no tools for small phillips screws. The Compact does (mini screwdriver.)
I really am drawn to the Compact. But, my Climber Plus has all that the Compact has, except the nail file. In a pinch, I use the can opened blade to "scrape" my nails shorter.
I would be willing to replace the hook or corkscrew with a dedicated nail file like that on a Cadet.
Sent from my iPad using Tapatalk -
Huhh.... you do know you can add the mini screwdriver to any Sak with a corkscrew, right....?

I prefer the default configuration. Modding and adding tools ruins the look of the knife.
~
Errr.... ok... so if the Compact that has a micro SD on the corckscrew as default from factory it's ok and looks good, but if you add the same micro SD to a Climber that doesn't come as default from factory with it, it ruins the look...? How do you figure...?

And if even so... you do know that you can carry the micro SD somewhere else other than being physically attached to the actual Sak, right...?
Bare in mind i'm not bashing either the Climber or the Compact here, in fact i would be the last person to do it, as i'm loving them so much i'm carrying both of them as i can't choose between them...
...it's just your earlier point doesn't make much sense to me, as there is an immediate solution to the difficulties you've mentioned... -
Necro vote for the openers layer
I prefer the variety and extra thickness of these tools ....... and having an **awl ** !!! I'm not so bothered about the small blade...
But I always thought it was a very poor trade - Four tools for one !!!!
Having said that I do quite like - and carry - the Compact - Eg in the evenings (going to friends or a party) or when you have posh thin trousers (dress pants) - So you do notice a thicker tool
EDIT: Hmmm - That did not sound too good :o
-
I've been carrying the Pioneer X for the last couple of years, but carried a Compact for years before that.
I voted combo tool as I figured (correctly) it would be the less popular one.
I agree with Huntsman that one tool in place of four is a significant difference. -
Well.. I think i prefer the openers but... BUT...
While I've heard many stories about the combo tool weakness, combo tools bended and so on, today i had to deal with a phillips screw and it was fairly tight, but still i opened it with the combo tool of my compact and it was good: no bend, no damage, just a well done job. That leaded me to ask myself why so many people hates combo tool? maybe they abuse it? It could be.. I had no problem today but I was also careful not to damage it and I worked slowly.. What do you think? -
I typically lounge around the house with nothing but a Bantam on me--for opening cans in the kitchen, or the quick tighten of a screw on a cabinet door or something, it gets it done. Same with the 108mm German Army Knife, when I just decide I want to go for a walk, and need a few tools on me, but not a whole lot of bulk. For EDC, the dedicated layers. For me--BOTH. It just depends on what I'm doing.
-
I like the combo tool and have not had any issues with it. Although, I most commonly have/use it on a Yeoman where I have an inline Phillips and refrain from using it for heavy prying.
-
Can't believe I missed this thread for so long, I voted 'something else' because the decision does depend on the layers/thickness of the knife.
If the SAK is 4 or less layers, and has everything I wanted, I think the opener layers is perfectly fine.
But if a SAK is 5 or more layers, I think I might prefer switching the opener layers to a combo tool if I could mod it.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login