Working on a new SAK display!
-
Today I made this black MDF panel that fits inside the ammo crate. The SAK display will be made on this panel. More on that later this week when I continue!


-
Nice

-
The ammo crate that I’m going to use for my display has finally arrived!


I'm absolutely going to rip off this idea! :D Nice work!


-
@glenfiddich1983 said:
Today I made this black MDF panel that fits inside the ammo crate. The SAK display will be made on this panel. More on that later this week when I continue!

Oh boy, nice start

-
There's going to be a lot of popcorn consumed before this is finished

You have a very clean and tidy looking workshop G

-
@Sparky415 said:
There's going to be a lot of popcorn consumed before this is finished
You have a very clean and tidy looking workshop G

Nothing wrong with some good boxes of popcorn! I'll have my popcorn salty please!

-
Salted popcorn is the best

-
Kettle popcorn! Oh boy...so good!

-
I've been continuing working on the display, in particular with the slots that will hold the alox Dutch army knives.
First thing to do was drilling some holes.



You'll notice that some holes are very shallow. That's because of the keyrings, for which I have to drill additional holes first.


After this i'm drilling the holes that will become the slots all the way through from the other side. In some tests I did before I started this I found out that drilling them through all the way from one side will result in parts of wood breaking off, like on the picture shown below in the spoiler tags.
Spoiler:



To be continued in the next post.
-
With the holes finished i'm taking the project outdoors to do some work with the router.
I'm planning to use 8mm of felt under the SAKs in the display, so I need to remove some wood to create a sort of slit that will hold the felt.
I created a rail to guide the router, and secured the SAK slots with screws so it won't move while I pull the router towards me.




Next thing to do is use the router to create some cuts for the bails of the KL83, KL85 and KL86 (the rest have keyrings).
I made a frame for this to make sure every cut is straight and of the same length.




To be continued in the next post.
-
The work in the previous two posts resulted in these finished SAK slots.

Used the miter saw to cut them in exactly the right length for the display.

And this is how it is going to look on the display panel:

Before i'm going to attach them to the panel I will first finish the rest of the slots, that will hold the 108mm collection. Hopefully I can find some time for that next week.
To be continued!

-
That is some amazing craftsmanship! Thank you for sharing, I will look forward to future posts!

-
Excellent work glenfiddich starting to look really good

-
@FolderBeholder said:
That is some amazing craftsmanship! Thank you for sharing, I will look forward to future posts!
@Wspeed said:
Excellent work glenfiddich starting to look really good

excellent work there! Great layout and execution

-
Thanks awll

-
Nice work!
[It's not failure if you learn something from it]
-
Interesting,,
JR -
Excellent ideas and execution!

-
Today i've been busy again with the ammo crate display!
With the SAK slots finished today it was time to attach them to the base plate of the display.
First thing to do was aligning them and drilling some holes in the base plate. By the time I realised I wanted to take some pictures of the work in progress I already attached the first row, so in the pictures you'll see me attachine the second row.




Using some F clamps to hold it in place...

Then turning it upside down...

Making sure I won't drill too deep...

Drilling the middle hole...

Using an old fashioned manual screwdriver to make sure I don't overtighten it...

After tightening the middle screw I did the other ones, and ended up with a neatly secured set of SAK slots.


Continued in the next post
-
Time to cut the felt.


And the Dutch Army Knife part of the display is finished! :ahhh



The rest of the display will be used to display the 108mm collection. So next thing to do is make the slots for those! 8)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

