Stone washing SAK tools.
-
@ThePeacent said:
I found this technique on a knife forum, apparently used by many to stonewash knife clips
- Strip finish with sandpaper, if necessary
- Place clip in small food-type container with smooth round pebbles (or use old busted up ceramic tiles for a more aggressive stone washed look.), a small amount of water, and some dishwashing detergent
- Secure top to container so that it is watertight (glue and tape help)
- Wrap container in bath towel and secure with tape
- Place everything in the dryer and run on air-only for about 30 minutes
- Remove from dryer and remove towel
- Open container
- Rinse and dry clip
Now this is very doable! Have everything that is needed and nothing to buy...thanks!
-
@ThePeacent said:
I found this technique on a knife forum, apparently used by many to stonewash knife clips
- Strip finish with sandpaper, if necessary
- Place clip in small food-type container with smooth round pebbles (or use old busted up ceramic tiles for a more aggressive stone washed look.), a small amount of water, and some dishwashing detergent
- Secure top to container so that it is watertight (glue and tape help)
- Wrap container in bath towel and secure with tape
- Place everything in the dryer and run on air-only for about 30 minutes
- Remove from dryer and remove towel
- Open container
- Rinse and dry clip
Fantastic. That's so simple I don't know why I didn't come up with this.
I've been thinking about stonewashing as well and have made multiple concept drawings of DIY stonewash machines.
But this is very, very easy. Good tip! -
Stone washing with soapy water and abrasive stones wasn't enough for me and got assistance to do an acid wash as well. Since I had the knife taken down, I took out the reamer and replaced with a smaller flathead screw driver. The scales were aftermarket made from some type of composite.

-
Very cool

-
thanks guys! besides the multitool web store which is unfortunately down, where do can I get "used" AKA cheap SAK's to use for future builds? thank you in advance for your time.
-
Great outcome Paul

...SAKs for mods? The "e" of "bay"?
-
Thanks Matt, I was wondering if there was another alternative to eBay hehe. I heard TSA sells "captured" SAKs somewhere.
-
That came out really great.

-
Looks good!

@Pauliachi said:
Stone washing with soapy water and abrasive stones wasn't enough for me and got assistance to do an acid wash as well. Since I had the knife taken down, I took out the reamer and replaced with a smaller flathead screw driver. The scales were aftermarket made from some type of composite.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
