What did you use your Sak on today?
-
Going to be moving some things around, so, I take measurements, draft everything to scale, then move things around to see which way will work best before having to move the actual items,, so I needed my sak scissors to cut the items out..
JR

-
Good job JR

-
Don’t forget the SAK display cabinet!

-
Use the Spirit to open my scooter's oil cap.

Sent from my CPH1723 using Tapatalk
-
@classicrock said:
Use the Spirit to open my scooter's oil cap.Great use of the Spirit classicrock!

-
great use

-
Removed the oil fill plug on my lawn mower, changed the oil, then completed the first grass cutting of the season.

-
Nice one

-
Used the classic sd twice today. First its tweezers to remove a splinter. The second time i used the small screwdriver to fix the latch of the cabinet in my gym. Had all my stuff stacked in there when i realized that the screw mounting the latch was loose, and the latch would not close. Out came the SAK and fixed it in a few seconds

-
Good usage SVL.

-
Morning started with putting up the flag.. Got to love the inline Phillips

Skickat från min SM-G930F via Tapatalk
-
Good job kottskrapa

-
Thanks Wspeed! The tip of the canopener works well but not as good as the 3d phillips
-
I prefer the 3D Philips driver

-
A few days ago I tied down my fence with a nylon ski-rope to survive a wind storm. Today I used the large flathead on the Cadet to undo a rock-hard knot while removing this rope.
I used the can opener to remove a staple to make copies of some documents.
Later I popped a beer cap with the bottle opener of the Skipper.
Pretty ordinary day... ;)
-
Nice uses!

-
Great uses BOL

-
Used the inline Phillips driver on my Explorer at work to remove the wall plate and reinstall a data jack that had been pushed in to the wall box. I used to carry a Deluxe Tinker at work, but the inline Phillips on the Explorer made this quick fix so much easier than using the back-side Phillips to get the screw out far enough to finish the job with the can opener Phillips.
-
@Kraken said:
Used the inline Phillips driver on my Explorer at work to remove the wall plate and reinstall a data jack that had been pushed in to the wall box. I used to carry a Deluxe Tinker at work, but the inline Phillips on the Explorer made this quick fix so much easier than using the back-side Phillips to get the screw out far enough to finish the job with the can opener Phillips.

I'm tearing up.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
