new section on main site...
-
Off topic: did the coal really run out, or was it just Thatcher shutting down the mines?
-
@J-sews said:
Off topic: did the coal really run out, or was it just Thatcher shutting down the mines?Lol. Perhaps the singly most divisive issue in modern British politics that. My belief (and I think it's fairly informed) is that the mines had to close because the coal that was cost effective to mine ran out. My house is built on an old mine site that closed in the early 1990s. Just down the road, there's a museum that was set up by miners who lost their job when that pit closed. They do a mine tour and it's really a great attraction they have there, very interesting. That pit, was empty, and although the mine tour guides were on strike at the time and were involved in the riots etc, they will admit now, that it wasn't a viable business.
I truly believe that beneath all the politics, it was a pretty simple matter, and we could get coal at the time more cheaply from Japan than we could from out own mines. Not so now of course, as the closure of our last mines allowed the countries we import from to name their price.
If we had coal - someone would be digging it up!
-
Off topic: did the coal really run out, or was it just Thatcher shutting down the mines?
Lol. Perhaps the singly most divisive issue in modern British politics that. My belief (and I think it's fairly informed) is that the mines had to close because the coal that was cost effective to mine ran out. My house is built on an old mine site that closed in the early 1990s. Just down the road, there's a museum that was set up by miners who lost their job when that pit closed. They do a mine tour and it's really a great attraction they have there, very interesting. That pit, was empty, and although the mine tour guides were on strike at the time and were involved in the riots etc, they will admit now, that it wasn't a viable business.
I truly believe that beneath all the politics, it was a pretty simple matter, and we could get coal at the time more cheaply from Japan than we could from out own mines. Not so now of course, as the closure of our last mines allowed the countries we import from to name their price.
If we had coal - someone would be digging it up!
Thanks for the explanation, that was something I've always wondered about.

-
That's just my take on it. The issue is more divisive than religion here in Derbyshire and other traditional mining communities!
-
Coal is a hot button issue in my part of the country,living in the coalfields of Southeastern Ohio.A lot of the mines have been played out,and most of the rest were closed because of clean air regulations.Coal in this part of the country has a high sulfur content.
-
There are industrial equipment from China that's best in the business, but of course at that level it's no cheaper than the competition.
@J-sews said:
As a person who makes his living in manufacturing, I have deep feelings about this topic....
So how do North American and European manufacturers even compete? I sometimes wonder. Not on price certainly. They either need to have super high volume production to keep costs low (like Vic or Wenger) or offer a higher quality product that will hopefully appeal to discriminating buyers willing to pay extra for it. (Leatherman, SOG, SureFire, etc)
So bob, we know you are a machinist, but what the heck do you make anyway?
Also Surefire get most sale from government/military/police contracts, I really don't think they give a damn about civilian market.
-
Not wanting to throw flammible fluid on the fire , but the 2 MT's I own that have serrious QUALITY control issues were made in the USA. My Super Bear Jaws locks only partially lock on 1/2 the tools , I am ok with that & I really like the MT. The other is the Leatherman TTi Charge , 2 of the Liner Locks do not engage fully (they only got it right on half the locks :ahhh ) & the very well commented issue with the rubbing Charge file occurs on my one. I could fix the liner locks with a bit of sanding , but the TTi is Leatherman's flagship tool why do they not fix these basic & COMMON QC problems.
It would be great Def if you could get some kind of response from Leatherman as to why these issues have not been addressed at the factory? -
@MultiMat said:
Not wanting to throw flammible fluid on the fire , but the 2 MT's I own that have serrious QUALITY control issues were made in the USA. My Super Bear Jaws locks only partially lock on 1/2 the tools , I am ok with that & I really like the MT. The other is the Leatherman TTi Charge , 2 of the Liner Locks do not engage fully (they only got it right on half the locks :ahhh ) & the very well commented issue with the rubbing Charge file occurs on my one. I could fix the liner locks with a bit of sanding , but the TTi is Leatherman's flagship tool why do they not fix these basic & COMMON QC problems.
It would be great Def if you could get some kind of response from Leatherman as to why these issues have not been addressed at the factory?What do you mean by liner lock not engaging fully? If the lock doesn't slide all the way to contact screw, that's actually the correct way for liner lock to engage.
-
Not wanting to throw flammible fluid on the fire , but the 2 MT's I own that have serrious QUALITY control issues were made in the USA. My Super Bear Jaws locks only partially lock on 1/2 the tools , I am ok with that & I really like the MT. The other is the Leatherman TTi Charge , 2 of the Liner Locks do not engage fully (they only got it right on half the locks :ahhh ) & the very well commented issue with the rubbing Charge file occurs on my one. I could fix the liner locks with a bit of sanding , but the TTi is Leatherman's flagship tool why do they not fix these basic & COMMON QC problems.
It would be great Def if you could get some kind of response from Leatherman as to why these issues have not been addressed at the factory?What do you mean by liner lock not engaging fully? If the lock doesn't slide all the way to contact screw, that's actually the correct way for liner lock to engage.
The liner lock does not slid completely across the blade's lock. I hope the pics I took awhile back show what I mean.I think a little sanding of the blade's end lock would allow the liner lock slide across & lock more securely .
[(http://i291.photobucket.com/albums/ll287/multimat426/Navitool TTi/S6302271.jpg)]
](http:// -
That's perfectly fine, and is how the liner lock should work to allow room for wear.
To test the pic, do what STR showed in the pic, if it doesn't fold it's safe to use.

-
@MultiMat said:
Not wanting to throw flammible fluid on the fire , but the 2 MT's I own that have serrious QUALITY control issues were made in the USA. My Super Bear Jaws locks only partially lock on 1/2 the tools , I am ok with that & I really like the MT. The other is the Leatherman TTi Charge , 2 of the Liner Locks do not engage fully (they only got it right on half the locks :ahhh ) & the very well commented issue with the rubbing Charge file occurs on my one. I could fix the liner locks with a bit of sanding , but the TTi is Leatherman's flagship tool why do they not fix these basic & COMMON QC problems.
It would be great Def if you could get some kind of response from Leatherman as to why these issues have not been addressed at the factory?you said you adjusted the pivots and now its like that....not to start with...
-
Not wanting to throw flammible fluid on the fire , but the 2 MT's I own that have serrious QUALITY control issues were made in the USA. My Super Bear Jaws locks only partially lock on 1/2 the tools , I am ok with that & I really like the MT. The other is the Leatherman TTi Charge , 2 of the Liner Locks do not engage fully (they only got it right on half the locks :ahhh ) & the very well commented issue with the rubbing Charge file occurs on my one. I could fix the liner locks with a bit of sanding , but the TTi is Leatherman's flagship tool why do they not fix these basic & COMMON QC problems.
It would be great Def if you could get some kind of response from Leatherman as to why these issues have not been addressed at the factory?you said you adjusted the pivots and now its like that....not to start with...
No I had not noticed that the locks did not hold before , I have since tried tightening the Bears fasteners right up & loosening them off & it makes no difference they still fail regardless of how the fasteners are tensioned. I have only cleaned & oiled the tool , I have not abused it. The tool is second hand so I do not know if something has happened to the tool in the past that has lead to it's locks failing on both sides. The locks do look to be a weak point in the tools design , I had hoped by tightening it up it would solve the problem, but it has not.The Bear was a gift & I treasure it , so I can live with it's faults.
-
Not wanting to throw flammible fluid on the fire , but the 2 MT's I own that have serrious QUALITY control issues were made in the USA. My Super Bear Jaws locks only partially lock on 1/2 the tools , I am ok with that & I really like the MT. The other is the Leatherman TTi Charge , 2 of the Liner Locks do not engage fully (they only got it right on half the locks :ahhh ) & the very well commented issue with the rubbing Charge file occurs on my one. I could fix the liner locks with a bit of sanding , but the TTi is Leatherman's flagship tool why do they not fix these basic & COMMON QC problems.
It would be great Def if you could get some kind of response from Leatherman as to why these issues have not been addressed at the factory?you said you adjusted the pivots and now its like that....not to start with...
No I had not noticed that the locks did not hold before , I have since tried tightening the Bears fasteners right up & loosening them off & it makes no difference they still fail regardless of how the fasteners are tensioned. I have only cleaned & oiled the tool , I have not abused it. The tool is second hand so I do not know if something has happened to the tool in the past that has lead to it's locks failing on both sides. The locks do look to be a weak point in the tools design , I had hoped by tightening it up it would solve the problem, but it has not.The Bear was a gift & I treasure it , so I can live with it's faults.
are the tools all properly aligned?
-
I have had about 4 or 5 Locking super bears. I would not trust the locks very far on any of them. I mentioned that in your original bear thread. That is why I prefer the non locking Bear. Just not a very good locking system. I think with a little work on some of the tools locking notches with a dremel you could improve the lockup.
-
@WH867 said:
I have had about 4 or 5 Locking super bears. I would not trust the locks very far on any of them. I mentioned that in your original bear thread. That is why I prefer the non locking Bear. Just not a very good locking system. I think with a little work on some of the tools locking notches with a dremel you could improve the lockup.I had wondered if that might work.It would be tricky though.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
