Anything Goes Official MTo 13th Anniversary Monthly Challenge and GAW !!!
-
-
@superpaco said:
This is the third time I've seen this band's albums, I'm gonna have to check them out at some point. Especially since the lead singer lived and died in my home state.You won't regret it! One of my favorite bands
[It's not failure if you learn something from it]
-
Hope your awlright Matt!
[It's not failure if you learn something from it]
-
@Noa Isumi said:
...
Good luck MTMatt hope they get you patched up right...o wait is it still right if its the left
Laughter is the best medicine.
Get well soon

Thank you Noa :D
-
@LoopCutter said:
Wowzers, reading that curled my toes!!!Now my wife will not let me get a Spirit.
Prayers for you that Surgeons’ skills are as good or better than skills to cause injury.
For the best Matt, in my thoughts for GREAT RESULTS.
Sent from my iPhone using Tapatalk
Thank you Sir

-
-
Thank you all for your support...
SirVicaLot, Poncho, gerleatherberman, Rapidray, jaya_man, Exeter, kottskrapa and all
-
DAY 7
Going Swiss today
<a href="https://flic.kr/p/2gsWpGT" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/48218888751_3ba0114f32_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>0353081A-C540-483A-ABC4-DE45455AB13B by Duncan Moore, on Flickr
-
@MTMatt said:
Used the Spirits wood saw to cut the tendon for opening the left thumb. Worked like a charm.Oh smurf! I hope that heals nicely at least.
That was clearly a quality problem. You should complain to Victorinox. Let me draft it for you: "Dear Victorinox, your tool is missing a safety feature common on even cheap tools. They will only cut a little bit at a time."
-
Day 7
Another sharpening thingy, this time with a Victorinox Evo 18 put on top.
This is my Wadkin Bursgreen B21 sharpening machine. It is an oldie, but it works perfectly. It is currently in storage but I'd hopefully have space for it soon - and maybe clean it up a bit :)
I've taken off the wheel covers as one doesn't really see much with them on. It is a 4 wheel machine with 2 different speeds on the wheels, and various setups for jigs. Two wheels are kind of unusual. One has a conical part to sharpen inside round edges. Another one is porous and filled with oil - it gradually releases oil to the surface of the wheel during use.

-
Day 6 Recap...

-
Day7
Some of the best tea leaves in China often comes in a form of "plate", and oftentimes, we need to break the leaves into crumbs before consuming them. Dad brought one of those tea plates today to share it with family friends, and out come the SAK mountaineer awl to help him breaking it into crumbs.

-
Another sharpening thingy, this time with a Victorinox Evo 18 put on top.
This is my Wadkin Bursgreen B21 sharpening machine. It is an oldie, but it works perfectly. It is currently in storage but I'd hopefully have space for it soon - and maybe clean it up a bit :)
I've taken off the wheel covers as one doesn't really see much with them on. It is a 4 wheel machine with 2 different speeds on the wheels, and various setups for jigs. Two wheels are kind of unusual. One has a conical part to sharpen inside round edges. Another one is porous and filled with oil - it gradually releases oil to the surface of the wheel during use.
Is the conical used for something like a spoon carving knife or chisel? This machine looks hardcore!

-
Going Swiss today
<a href="https://flic.kr/p/2gsWpGT" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/48218888751_3ba0114f32_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>0353081A-C540-483A-ABC4-DE45455AB13B by Duncan Moore, on Flickr
Ouch!

-
-
@Dutch_Tooler said:
+1 here's to good surgery and speedy recovery from me too Matt!

Dank u zeer DT

-
Another sharpening thingy, this time with a Victorinox Evo 18 put on top.
This is my Wadkin Bursgreen B21 sharpening machine. It is an oldie, but it works perfectly. It is currently in storage but I'd hopefully have space for it soon - and maybe clean it up a bit :)
I've taken off the wheel covers as one doesn't really see much with them on. It is a 4 wheel machine with 2 different speeds on the wheels, and various setups for jigs. Two wheels are kind of unusual. One has a conical part to sharpen inside round edges. Another one is porous and filled with oil - it gradually releases oil to the surface of the wheel during use.
Do you live near to a museum?

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


Thanks Comis 