Anything Goes Official MTo 13th Anniversary Monthly Challenge and GAW !!!
-
@SirVicaLot said:
Sure he did. He did not eat it like lightning speed at all... :D
-

Time to cover one of the greatest multitools ever, the E-tool:

This exceptionally versatile multitool can be used for everything from digging to climbing. Makes a decent chopper, too. Of course, it is excellent for digging a cat-hole latrine. :D

Note that the “seat” configuration could also be called the “throne” configuration.

Mine, fully extended:

And in ‘throne’ configuration. (Just be sure you dug your cat-hole first!) This isn’t the most supportive seat, best to have the handle pointing away from the hole. Or use the squat position, and use the handle (away again) as a hand-hold.

Some guys, will flip the blade 90º and rest the handle on the ground. This does give you a bit more height and comfort, but you end up with dirt on one cheek. So to speak. :-\
The downside here is the E-tool's weight. Otherwise the E-tool is versatile and rugged. I carry one in the truck in Winter, use it car camping, and ice-fishing. A good piece of kit and a legendary multitool.


-
One of the most intelligent things the Army ever developed. ;)
-
Day 16
1740 hrs and I almost forgot to take my anything goes picture for the day. I just got it though while still light out.
I collect rainwater in a barrel to water my potted plants but this invites mosquitoes. To prevent mosquitoes I use mosquito dunks, a slow dissolving larvicide that prevents the baby mosquitoes from developing and is harmless to any animals or birds that drink the water. They're supposed to last up to 60 days. The problem was when it rained the water in the barrel got so turbulent that it dissolved the dunks or washed them away. My fix was I perforated a peanut butter jar and added some gravel to the bottom so it would sink and I place the dunks in the jar and they are protected from the turbulence in the barrel when it rains. By the way, the perforations were made with the awl on the Super Tool 300. -

Time to cover one of the greatest multitools ever, the E-tool:

This exceptionally versatile multitool can be used for everything from digging to climbing. Makes a decent chopper, too. Of course, it is excellent for digging a cat-hole latrine. :D

Note that the “seat” configuration could also be called the “throne” configuration.

Mine, fully extended:

And in ‘throne’ configuration. (Just be sure you dug your cat-hole first!) This isn’t the most supportive seat, best to have the handle pointing away from the hole. Or use the squat position, and use the handle (away again) as a hand-hold.

Some guys, will flip the blade 90º and rest the handle on the ground. This does give you a bit more height and comfort, but you end up with dirt on one cheek. So to speak. :-\
The downside here is the E-tool's weight. Otherwise the E-tool is versatile and rugged. I carry one in the truck in Winter, use it car camping, and ice-fishing. A good piece of kit and a legendary multitool.

I hate to think what you've got planned for your grand finale.

-

Time to cover one of the greatest multitools ever, the E-tool:

This exceptionally versatile multitool can be used for everything from digging to climbing. Makes a decent chopper, too. Of course, it is excellent for digging a cat-hole latrine. :D

Note that the “seat” configuration could also be called the “throne” configuration.

Mine, fully extended:

And in ‘throne’ configuration. (Just be sure you dug your cat-hole first!) This isn’t the most supportive seat, best to have the handle pointing away from the hole. Or use the squat position, and use the handle (away again) as a hand-hold.

Some guys, will flip the blade 90º and rest the handle on the ground. This does give you a bit more height and comfort, but you end up with dirt on one cheek. So to speak. :-\
The downside here is the E-tool's weight. Otherwise the E-tool is versatile and rugged. I carry one in the truck in Winter, use it car camping, and ice-fishing. A good piece of kit and a legendary multitool.

It is a multi tool for sure! I have mine with me on the extended hike pack.

-
Thanks for the back-up here, Ray.

It's not clear that everybody agrees with us.......

When the zombie apocalypse begins, some naysayers will wish they had paid more attention and taken notes....

-
Day 16
This was my solution to removing the thumb bar from my 110. The hacksaw on my ST300! Only took a few minutes of careful sawing before the integrity of the bar was compromised enough to just bend it off the blade. The corner along the edge is how I got the cut started, then a steady stroke kept my 110 from being mauled.

-
Day 16 (for the show)
I was in the mode so I gave my Cryo a little spa treatment. It fared the chlorine pretty well but salt water started to show case the weak spot. That spot was the ball bearing that corresponds the detents in the blade. And that was the only spot that corroded, so I will say I'm impressed by the rest of the knife construction.

-
@Nix said:
Thanks for the back-up here, Ray.
It's not clear that everybody agrees with us.......

When the zombie apocalypse begins, some naysayers will wish they had paid more attention and taken notes....

I have a tool that is more than up to taking care of them galldanged zombie fellers. I'll try to get a pic & post it fer ya Nix. .............yeah I will.

-
:(Day 17
The Buck Ultima 1 is the pinnacle of shelf queens. More a piece of jewelry than a knife. Every surface is polished to a mirror finish. The Mother of pearl scales are absolutely flawless. My pics do not even come close to doing it justice. It is given the model number of 507 , but in reality it is built on the Buck 505 frame. That has been the base for many of Bucks most artistic endeavors.


-
Day17
Going onto the next mod...

-
The Buck Ultima 1 is the pinnacle of shelf queens. More a piece of jewelry than a knife. Every surface is polished to a mirror finish. The Mother of pearl scales are absolutely flawless. My pics do not even come close to doing it justice. It is given the model number of 507 , but in reality it is built on the Buck 505 frame. That has been the base for many of Bucks most artistic endeavors.
Shiny! Very nice shelf queen indeed!

-
@superpaco said:
Day 16 (for the show)I was in the mode so I gave my Cryo a little spa treatment. It fared the chlorine pretty well but salt water started to show case the weak spot. That spot was the ball bearing that corresponds the detents in the blade. And that was the only spot that corroded, so I will say I'm impressed by the rest of the knife construction.
Superpaco, did you take apart the whole knife to clean the bearings?
-
The Buck Ultima 1 is the pinnacle of shelf queens. More a piece of jewelry than a knife. Every surface is polished to a mirror finish. The Mother of pearl scales are absolutely flawless. My pics do not even come close to doing it justice. It is given the model number of 507 , but in reality it is built on the Buck 505 frame. That has been the base for many of Bucks most artistic endeavors.

-
-
Day 17
I really like this little knife
<a href="https://flic.kr/p/2gAxRpZ" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/48305019627_7e1155b6d6_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>FECA7A50-64B1-40DF-B607-CBA7BACCF871 by Duncan Moore, on Flickr
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


