Anything to do with motorcycles, scooter, etc...
-
Nice one pietervn I can’t wait for better weather over here
It’s been horrible weather for the last few weeks
And all I want to do is go out for a nice bike ride
-
Thats a sweet looking bike. Client yesterday is now riding a BMW vs his Harley. I don't recall the model.
-
Starting work on the hydraulic vehicle lift so I can use it for my motorbike
At the moment I am getting the plywood sheet cut to the size I need
And once that is done I will be fitting the wooden
slats to strengthen the plywood platform I won’t get it all done today
As I haven’t got the wheel chock / clamp for it yet
But I can at least park the bike on top to give me more space in my workshop



-
Plywood is now cut to size and ready for fitting
the wooden slats to strengthen the platform
If I will get a chance to get anymore done today
I don’t know as it looks like we are going to have rain any minute


-
I didn’t get anymore done today

Hopefully I can get more done tomorrow
-
Nice snaps, Pete!
I always like the look of the R9T.

-
Thanks Nix

Be handy for working on the bike and I will have more
space in my workshop when I can park the bike on the lift
Rather than having the motorbike parked up next
to the hydraulic vehicle lift it’s a lot of waisted space
-
@Wspeed said:
Thanks Nix
Be handy for working on the bike and I will have more
space in my workshop when I can park the bike on the lift
Rather than having the motorbike parked up next
to the hydraulic vehicle lift it’s a lot of wasted spaceThat looks quite cool. That will make working on the bike quite easy.
Just think, you can add another bike to your stable!!! One on the lift, one under the lift :D
Pete
-
Unfortunately it is raining here today so I can’t carry on working on the lift ???
-
Just ordered this motorbike wheel chock
For the motorbike lift I am working on
This wheel chock can hold the
front or rear wheel off the motorbike

-
That will do the trick.

-
Especially as my motorbike hasn’t got a centre stand
So this way I can have the bike standing up straight when working on it
-
What a lovely day for a bike ride today.
A mate and I had a very nice breakfast run this morning. It started off pretty cold (1 degree C) but warmed up by the time we had breakfast. He was on his R65LS and me on the R9T. I recently got it back after some warranty work and had to make sure that all was OK. Happy to report so-far it is. Most of the wind Sydney has had over the last few days died down and skies were pretty blue. All up a smallish day, just a tad over 380 km. Both bikes ran very well, good coffee and good food.
I have a couple of days off next week and will definitely go for another run - pics to follow. :D
Cheers, Pete

-
This is what I got. Sorry for the link to a business.
So far, it has worked excellently, and it is small and portable enough to not take over my garage.
-
+1!

@Greg Jones said:
That's a great lift you're putting together Ws
+1 too, looking forward to seeing it when it's finished.
I also have no centre stand on the Guzzi... but they are available both from the maker themselves and from various aftermarket sources. I'm wondering if it's worth adding one. The Beemer I had had one... it makes some things easier (maintenance, parking in tight spaces) but adds a little weight.

Anyway, this can wait a little. I'm currently busy assembling a small spares and tool kit. It seems motorbike manufacturers are eminently confident no one needs any tools these days, nor spare bulbs, fuses and and spark plugs ::). The only tools in the stock kit are one (1) suspension adjustment key and one (1) fuse extractor thingy

Also, I need to make do with a tiny space only under the saddle. Not sure I'll have space for a tyre repair kit... and this makes selecting the tools a bit difficult as I need to watch their size and weight. I have found some used items in the 'bay which are on their way to me. -
G'Day D_T,
I have a similar problem on the R9T in terms of tools and space.
My basic tool-roll consists of the following:
Leatherman Crunch
1/4" hex bits that cover Torx, Hex and screw drivers
1/4" extension
A few fusesTire repair kit (read emergency get out of jail card :D)
8 CO2 canisters and a double inflator that allows two canisters to inflate at the same time. Remember ALWAYS wear gloves when working with these canisters, they freeze on the the outside whilst inflating. DAMHIK.
String plugs - similar to the ones that were discussed a few pages ago
Glue / tire cement
Plug toolThe tools are all inside an old bank bag that the Mrs stitched up for me. The tire repair kit is in a pencil case. Neither fit under my seat, there is NO space under it, but I always carry a small daybag on a day ride. As part of my daily commute, I don't bother with these. I have road side assist and will use them if required.
I took the suspension C-spanners off the bike, I only adjust the suspension at home where I can write changes down and one usually need a second person to help with the measurement.
I'll post pics over the weekend if you want.
Pete
-
The lift I am making for my bike is normally used for repairing cars
And as it is stored in my workshop it’s taking up a lot of space
This is why I am now making it into a motorbike lift to store and
work on the bike for when I am not using it for repairing cars
And this way I have more space in my workshop
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
