Anything to do with motorcycles, scooter, etc...
-
These are the strengthening slats I am working
on now to fit between the ones already fitted



-
Once I have finished with the strengthening slats
I am going to start working on the ramp that
I will use for getting the bike on top of the platform
-
Looking goos, Speedy!

-
Thanks Nix

-
@Wspeed said:
Nice selection of tools for your bike D_T
I have the same for my bike under the rear seat
But I also have a small air compressor
and tyre puncture repair kit under the seat
Thanks
Alas, no place for a tyre kit anymore, let alone a compressor. I shall have to trust German road cleaning schedules 
-
I have to say so far I have been lucky not to get a puncture :D
But you never know when it can happen but hopefully I will never need to use it -
Fitted all of the strengthening slats
Now it’s waiting for the wheel chock to get delivered
on Monday and then I can finish the lift platform

-
Then I am thinking of covering the platform with rubber flooring


-
Probably a good idea...

-
@Dutch_Tooler said:
:ahhhDecisions, decisions

Meanwhile before and after pics of the tool kit on the Guzzi. I have added a few useful items. The filled pouch (minus the spark plug box, that goes into a small rear bag where I keep spare bulbs, a FAK and gloves) still just fits under the seat. Note to self: add some wire, paracord and tie wraps as well as a T40 bit and handle and what I think is a T60 bit.
That is quite comprehensive.
I include some pics of my "lite" kit and the tire repair kit.
I will also add some self amalgamating tape, to your kit. I have used mine for many different uses, very useful on the bike
I will take pics next weekend of all my kits that I use. The larger one goes on the GSA where space is not a problem. A small tin with a few nuts and bolts and washers is also very useful. I store my cable ties in an old bicycle tubby (thin road tube) and tie them to the rear frame. If I need a tie I just pull one out.
Pete




-
Thanks Pete

Nice kits

Good tip with the tape and some nuts/bolts, takes little space to add this.

Interesting to see the evolution of type of fastener heads used on BMW - on my old one (2001) spanners and Allen keys were more useful than Torx bits. Guzzi seems to remain more traditional, with a couple of exceptions (T40, T60(?)).
I see you're packing a Crunch with bits for the R9T. I have considered replacing the pliers with a multitool such as my Roxon with bits, but the pliers are quite compact and the Roxon would take more space, plus 1/4" bits are of limited use on the Guzzi.
-
@Dutch_Tooler said:
Thanks PeteNice kits
I see you're packing a Crunch with bits for the R9T.
Cheers Mate,
I think a Crunch is a very useful motorcycle tool. With the locking pliers it can be used for quite a few unusual tasks like clamping cables if you broke a throttle or clutch. I always have another MT / pliers with me. The blue kit is specific for BMW with the added torx bits, that one goes on long trips.
It is easy to go overboard, especially if one has the space. Tools add weight quite quickly so I am careful in what I pack. I have not used much of my stuff that much, but others have and that have kept the group going with only minor time delays.
What I never skimp on is the First Aid Kit. That is always packed, and like insurance I hope I don't have to use it.
Cheers, Pete
-
Indeed, I always carry a First Aid Kit in the small bag at the rear. I've found some uses for a ratchet and some Allen bits so I may add these, they shouldn't take much space.
In other news I had a nice ride today that brought me to the city of Landsberg am Lech. See pic.

-
Nice one D_T

-
Been busy working on the bike lift platform
And build and fitted the wheel chock to the platform
Now next is the last strengthening slats that
I need to fit where the wheel chock is mounted
Then I am nearly ready to paint and lay some flooring
And I still have to make a ramp for the platform




-

Just a question that's popped up: do you have a rear axle stand? Just thinking you might want to use that for longer term storage of the bike, during winter. If yes, you might want to provide some reinforcements to accommodate that.
How high can you lift the platform using your car lift? -
Yes I have paddock stands for the bike
And the lift can go about 120 cm high
I am still looking at where I have space to strengthen the platform up
the biggest problem I have are the arms on the lift as they are in the way
As I can only move them a small amount to make anymore space
-
Fitted the last strengthening slats but I want to fit some more
So I am going out now to get some more wood


-
That is looking good.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

