Anything to do with motorcycles, scooter, etc...
-
I have just ordered ten meters of aluminium angle
to use for the platform to protect the rubber edges
And two m8 eye bolts for the platform to strap
the bike on to when working on the motorbike :D

-
Here is a first. The last time I parked my bike away...I somehow left the power on the ignition after taking the key away. End result...my ride today did not happen as my battery is dead. Got it on the smart charger and will leave it there for a couple days. Still can't figure how that happened...but noticed something wrong right away when I inserted my key in the ignition.

-
Wonder what happened there Chako

-
No clue but this never happened before. The smart charger I have has the battery looking good now. I love my Optimate6 by tecMATE.

-
Bummer, Chako. I'm impressed that your battery would take a new charge!

-
That's too bad Chako, might of been a fluke that the key came out in the on position, or there could be some wear on the tumblers or key that allowed it
-
Best smart battery charger I could find. Paid for itself many times over.
I thought the same. Nothing seems wrong with key or ignition. All I know...my ignition was in the on position when I put my key in. My dash lit up right away. Battery had no power to crank the motor over. The smart charger had to desulphate the battery first and then ran the battery through its cycles untill the battery showed good by passing the chargers test cycles. I took the battery off the charger last night.
-
That's good news, ride on

-
Good to hear that the battery is still working Chako

-
I have been thinking a lot about the ramp for the motorbike lift
And after trying to make one with plywood board
I wasn’t happy with how much it was starting to way ???
So today I decided to order a aluminium 3ft folding ramp
These ramps can hold a maximum of 273kg
So a lot more than what my motorbike weighs :D

-
The spray adhesive has finally been delivered today

So now I am waiting for it to start cooling down
And then I can get started laying the rubber flooring
I have already cleaned the rubber and the plywood platform
But at the moment it’s just too hot over here
to use the adhesive as it would dry up to quickly -
Tomorrow I should be able to get the sides of the platform painted

-
I have just finished laying the rubber flooring

And now I am leaving it until tomorrow
Than I can have a look at trimming the edges
And hopefully get the sides painted up




-
Finally started on the platform and removing the rubber on the edges
And drilled the holes through the rubber for the wheel chock boltsI have just finished sanding the edges of the platform
So that is now ready for painting which I will do later when it’s cooler
And the eye bolts got delivered today so I need to fit them to the platformNow I am still waiting for the aluminium angle to get delivered
So I can start fitting that to the platform to protect the rubber flooring

-
Going well Speedy

Have you given more thought to the ramp? Looking forward to what you'll come up with.
-
Thanks D_T

I have ordered a 3ft aluminium folding ramp :D
I checked the weight the ramp can hold and it is nearly 300kg
the one I was making out of plywood was becoming too heavy >:(Here are some pics of the ramp



-
Fitted the eye bolts to the platform so now
I can get on with painting the sides of the platform
And hopefully it won’t be long before I get the aluminium angle
delivered that I am using to protect the edges of the rubber flooring




-
Unfortunately it is raining here at the moment so I can’t get
started on the painting as I have to put the motorbike outside ??? -
That sucks
JR -
Yes it does >:(
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

