Swisschamp Pouch
-
Lovely job mate... I've been keeping my eye out for some old leather to play with for similar purposes.
I think more coats of the stain should bring it down more, if not just scribble all over it with a black sharpie :D
-
I tried some dark shoe polish on the sheath. It antiqued the sheath a bit more, and yellowed up the color to something more acceptable, but it did not darken the overall shade. I also tried some melted Sno Seal tonight, which had no effect on the color whatsoever. I think that the leather is sanded and buffed to too high of a polish to allow much stain the enter the grain. I'd probably have to sand it with a low grit paper to get the shade to be darker. Tough once the sheath is constructed. I'll have to live with it the way it is, and let age and use darken it up
Here is that drawing. Please forgive my lack of mechanical drawing skills, and my lack of the metric system.

-
I think you may be right about the polish keeping any stain from getting to the leather itself. Use it, wear it and handle it with grubby fingers and it'll soon get 'work-darkened'. :D
-
Here is the final color of the sheath, after all of my coloring attempts. Lots of antiquing. It already looks like it's had years on time on my belt.


-
I know its not quite where you wanted it to be but it still looks fantastic

Neil
-
So I stumbled on this sheath again on That Other Forum (TM) and it got me thinking. You can easily make this from a single piece of leather by extending the 1 3/4" bottom part by 6 1/2" and taking it through the back and over the top.
How would you go about, though, if you wanted to make a horizontal carry, side opening sheath from a single piece of leather, with no stitching/pinning visible on the front side of the pouch? The only idea I came by (trying a paper mock-up) was by pinning it on the top and bottom and "threading" that long piece of leather under the two side ones, one of which would be extended to form a "wide loop" on the back of the pouch... (if that made any sense to you, please also explain it to me :D) -
I vaguely know what you're talking about

I'm going to try and make a horizontal sheath from seatbelt material.
-
Great idea. Care to grab some pics a la "making of", please...
:DOn a side note, wouldn't it be funny to have a seatbelt sheath for a seatbelt cutter (or a tool with one). :P
-
I have seen tube webbing and thought about using it to make sheaths. Using seat belts is a good idea.
Mike
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
