March SWISSTOOL Madness
-
<u>Day 2 :</u>
Hotel bathroom door knob was more wiggly than what I could bear.
So, I HAD to fix it.Big F[l]at [screwdriver] to the rescue .. with a POV Pr0n-like picture


-
Mags, I hear you - there’s plenty of colds going round sadly! Get well soon, if Fuzz leaves you any cough sweets, that is!!

Good uses everyone!

-
March 03:
Getting a new handle on a big squeegee. Pilot hole first.....

And Phillips driver for the win!

-
Great uses so far today.
Hope your feeling better soon Mags.
-
Day 2 - I was going out to get some firewood and some kindling but my axe needed a touch up and my sharpening puck was still in the house so I gave it a try with my spirit file. Not like the stone but enough for tonight

[It's not failure if you learn something from it]
-
And great uses and pics today everyone!
Had to Google "squeegee" never knew the name for it in English
[It's not failure if you learn something from it]
-
Great uses folks! Like the awl and Phillips team

Get well soon Mags and Fuzzy.

-
+1 Been a bit buggy myself the past few days
Day 2 freeing a seal from the tie

-
Day 2 of 30
Used serrated blade to cut torchs hose cause it was leaking, used then flathead to open hose clamp and put it back to relocated position.

Only Tools Matters
-
@SirVicaLot said:
That looks great! Is it pretty durable or does it wear off quickly?Cheers Mate
It is very durable. That has been on for quite a few months and has not chipped at all. I think the trick is to let it dry completely and then clean the excess off.
Pete
-
Day 2
Some mail opening today.

-
How about we all get together for a 'Selg Isolation Moot'?
Just don't put fuzzy in charge of the sweets -
Day 2 - Found the AWL!New front door was finally installed today.
Used the AWL to lift the edge of the Energy Star spec sheet sticker from the new door.

-
Day 2
Used the Spirit to install a surge protector over a wall socket. Needed the small slot driver to remove the original screw and then the phillips to install the new recessed longer screw.

-

These big multitools certainly are useful at times.
(though I do miss my little 4-layer SAK a bit.....)
-
DAY TWO
Used my SwissTool all damn day rebuilding the shaker head on my Mack spray truck. Used the phillips, scissors , knife and pliers. Used the hard wire cutters to cut electrical cable to splice the motor back to power.
Added a Craftsman 1/4 drive ratchet to the kit. It was found so free is awesome in my book, :D :D<a href="https://flic.kr/p/2iApgT5" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49616059462_675ec7bcfa_o.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20200303_161150
<a href="https://flic.kr/p/2iAnY62" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49615804491_dce455a98d_o.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20200303_125914
<a href="https://flic.kr/p/2iAnY4J" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49615804416_203353ae22_o.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20200303_161106
FOUL

This sheath is a PITA trying to reinsert the tool after use. The tool gets caught on the inner webbing separating the tool from the kit. May switch to standard sheath tomorrow.
<a href="https://flic.kr/p/2iAkj65" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49615286438_7bfa43dd0a_o.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20200303_173909
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login





