March SWISSTOOL Madness
-
Hope you get well soon mags!
Nice pics everyone
[It's not failure if you learn something from it]
-
**Swiss Fuzz Day 3 **
Used the scissors to cut some gel filters and the knife blade to cut heat resistant tape - visually it was stunning, but unfortunately I neglected to take some pics... So with the help of this glass of milk you'll just have to use your imagination...

-
DAY THREE
Used the SwissTool to rewire a solenoid and button switch on a Kubota. Switched to a standard leather sheath , ditched the kit for the day. Much lighter on the hip.
Main blade worked excellent in stripping the wire back. Used the pliers to crimp the bunt connectors right up.
<a href="https://flic.kr/p/2iAJ3KC" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49619722426_8682e1d6b8_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20200304_075541
<a href="https://flic.kr/p/2iAKqeP" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/49619989817_b3563fc26b_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20200304_170713
-
TEAM SWISSTOOL
-
Hi, all.
I read about the stiffness problem for Leatherman Free P2/P4 after users using the pliers to cut nail, and some user did report the same issue may exist for other LM models. Meanwhile, in the same thread, users also mentioned the problem don't exist in Vic tools.
P4 stiffness issue thread:
/topic/84134Since we are all at the beginning of the challenge, may I suggest to keep an eye out to see whether Spirit/Swisstool may suffer the same issue? I really rarely do have need to use the pliers to cut anything, but would love to learn from anyone who does.
-
Swisstool Is at the moment in the lead with one still missing from Spirit.
To add insult to injury, my madness today falls in with Swisstool.
My EDC Swisstool wrking on the Wife's stand mixer.
DAY 3
Good as New.

-
-
Day 3
Spirit cut down some boxes and opened some snacks. It also helped open some mail that held supplies for the next paracord project and then helped initial cutting and splicing to start project.

-
Great uses today, folks! Awesome read!

-
Day 4
I have some minutes in the morning for preparing rivets for new SAK. Spirit cuts and files brass rods well enough.

-
**Day 4
**
The little one had been eyeing my shiny toy on table, and finally putting his chubby hand on it to play.
...and later on I opened my wife's favorite brand of Japanese chocolate, and she just rolled her eyes on me...she knew I wasn't doing it for her, more like for the challenge.
:D
-
Day 4: Dinner with the Swisstool!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login






